Omron G3R-I Solid state relay Datasheet

Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety
of sensors are available.
• Input Modules and Output Modules that have the same
form-factor as the G2R.
• Using a coupler approved by VDE 0884 and assuring an
I/O dielectric strength of 4 kV.
• Incorporating an easy-to-see monitoring indicator.
• Approved by UL, CSA, and TÜV. (“-UTU” models)
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
■ Input Module
Isolation
Indicator
Response speed
Logic level
Supply voltage
Photocoupler
Yes
—
4 to 32 VDC
Supply current
0.1 to 100 mA
Rated input
voltage
Model
100 to 240 VAC
G3R-IAZR1SN
High-speed
(1 kHz)
5 VDC
G3R-IDZR1SN
Low-speed
(10 Hz)
5 VDC
12 to 24 VDC
G3R-IDZR1SN-1
12 to 24 VDC
■ Output Module
Isolation
Phototriac
Indicator
Yes
Zero cross
function
Yes
Rated output
load
2 A at 100 to 240 VAC
Rated input
voltage
5 to 24 VDC
G3R-OA202SZN
No
Photocoupler
Model
G3R-OA202SLN
—
2 A at 5 to 48 VDC
G3R-ODX02SN
1.5 A at 48 to 200 VDC
G3R-OD201SN
Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU DC5-24.
■ I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
AC IN
Mark attached to the top of the product
Specification
Input module, AC input
DC IN
Input module, DC input
AC OUT
Output module, AC output
DC OUT
Output module, DC output
Solid State Relay
G3R-I/O
407
Specifications
■ Ratings (at an Ambient Temperature of 25°C)
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
100 to 240 VAC
60 to 264 VAC
15 mA max.
60 VAC max.
20 VAC min.
G3R-IDZR1SN
5 VDC
4 to 6 VDC
8 mA max.
4 VDC max.
1 VDC min.
G3R-IDZR1SN-1
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
5 VDC
4 to 6 VDC
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
Output
Model
Logic level supply voltage
G3R-IAZR1SN
Logic level supply current
4 to 32 VDC
0.1 to 100 mA
G3R-IDZR1SN
G3R-IDZR1SN-1
Output Module
Input
Model
G3R-OA202SZN
Rated voltage
5 to 24 VDC
Operating voltage
4 to 32 VDC
Input current
G3R-OA202SLN
15 mA max.
(at 25°C)
G3R-ODX02SN
8 mA max.
Must operate
voltage
4 VDC max.
Must release
voltage
1 VDC min.
G3R-OD201SN
Output
Model
G3R-OA202SZN
Rated load voltage
100 to 240 VAC
Load voltage range
75 to 264 VAC
Load current (see note)
0.05 to 2 A
Inrush current
30 A (60 Hz, 1 cycle)
G3R-OA202SLN
G3R-ODX02SN
5 to 48 VDC
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
G3R-OD201SN
48 to 200 VDC
40 to 200 VDC
0.01 to 1.5 A
8 A (10 ms)
Note: The minimum current value is measured at 10°C min.
408
Solid State Relay
G3R-I/O
Characteristics
■ Input Module
Operate time
Item
G3R-IAZR1SN
20 ms max.
G3R-IDZR1SN
0.1 ms max.
Release time
Response frequency
Output ON voltage drop
Leakage current
Insulation resistance
Dielectric strength
20 ms max.
0.1 ms max.
10 Hz
1 kHz
1.6 V max.
5 μA max.
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
Vibration resistance
Shock resistance
10 to 55 Hz, 1.5-mm double amplitude
G3R-IDZR1SN-1
15 ms max.
15 ms max.
10 Hz
1,000 m/s2 {approx. 100G}
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Operating: 45% to 85%
Approx. 18 g
Ambient temperature
Approved standards
Ambient humidity
Weight
■ Output Module
Item
Operate time
Release time
Response frequency
G3R-OA202SZN
G3R-OA202SLN
1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
20 Hz
Output ON voltage drop
Leakage current
Insulation resistance
Dielectric strength
Vibration resistance
1.6 V max.
1.5 mA max.
1 mA max.
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
1,000 m/s2 {approx. 100G}
Ambient temperature
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Operating: 45% to 85%
Approx. 18 g
Approved standards
Ambient humidity
Weight
G3R-ODX02SN
1 ms max.
2 ms max.
100 Hz
Solid State Relay
G3R-OA201SN
2.5 V max.
G3R-I/O
409
Engineering Data
Load Current vs. Ambient Temperature
4-point mounting (see note 1)
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0.7
0.5
2
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0
20 30 40 55 60
80
−30 −20
100
4-point mounting (see note 1)
1.5
1.1
1
Single-point
mounting
16-point mounting
(see note 2)
0.6
0.5
0.5
−30 −20
G3R-OD201SN(-UTU) (40 to 200 VAC)
4-point mounting (see note 1)
2
Load current (A)
2
Load current (A)
G3R-ODX02SN(-UTU) (4 to 60 VDC)
Load current (A)
G3R-OA202SZN(-UTU)/OA202SLN(-UTU)
Ambient temperature (°C)
0
20
40 55 60
80
100
−30 −20
Ambient temperature (°C)
0
20
40 55 60
80
100
Ambient temperature (°C)
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-OA202SZN(-UTU)/OA202SLN(-UTU)
G3R-ODX02SN(-UTU)
20
10
10
30 50
100 200
500 1000
5000
10
9
9
8
8
7
6
5
4
3
Solid State Relay
7
6
5
4
3
2
2
1
1
0
Energized time (ms)
410
Inrush current (A)
Inrush current (A)
Inrush current (A)
30
G3R-OD201SN(-UTU)
10
10
30 50
100
300 500
Energized time (ms)
G3R-I/O
1000 2000
0
10
30 50
100
300 500
Energized time (ms)
1000 2000
Dimensions
Unit: mm (inch)
■ G3R
1
Terminal Arrangement/
Internal Connections
(Bottom View)
5.2
3
0.5
29 max.
(+)
4
9.6
1
28 max.
13 max.
(−)
17.4
4.75
5
4.7
0.5 4.75
4
4
Load
5
7.5
3
Input
1
5
(−)
(+)
10
2
20
■ Connecting Sockets
P2RF-05
Five, M3.5×8
G3R I/O Relay
4 dia.
4.2-dia. hole
12
71.5 max.
P2RF-05 Socket
58.5 *
M3 (M3 x16) or
3.2-dia. hole
19.5 max.
30 max.
54 max.
* Indicates a value when using the PFP-@N
Supporting Rail.
The value is 67.5 when using the PFP-@N2.
P2RF-05-E
G3R I/O Relay
59 max.
48 max.
M3.5 screw
PFRF-05-E
Socket
3.2-dia. hole
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
61 max.
P2R-05A
** Indicates a value when using the PFP-@N
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the PFP-@N2.
*** Indicates a value when using the PFP-@N
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-@N2.
14.5 max.
G3R I/O Relay
35.5 max.
P2R-05A Socket
Five, 3x1.5-dia. hole
36 max.
(Panel thickness must
be 1.6 to 2.0 mm.)
(For use when mounting in a panel or in
the P2R-P mounting plate )
Solid State Relay
G3R-I/O
411
14.5 max.
P2R-05P
Five, 1.6-dia. hole
G3R I/O Relay
35.5 max.
P2R-05P Socket
36 max.
Dimensional tolerance is ±0.1.
14 max.
Five, 1.6-dia. hole
P2R-057P
G3R I/O Relay
32 max.
P2R-057P Socket
41 max.
■ Socket Mounting Plate
Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row.
P2R-P
R2.25
10 ellipses
Square hole
■ Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535)
Model G3RIAZR1SN
Module type
Input
Rating
100 to 240 VAC
IDZR1SN
Input
5 VDC, 12 to 24 VDC
IDZR1SN-1
Input
5 VDC, 12 to 24 VDC
OA202SZN
Output
5 to 24 VDC
OA202SLN
Output
5 to 24 VDC
ODX02SN
Output
5 to 24 VDC
OD201SN
Output
5 to 24 VDC
Model G3RIAZR1SN
Module type
Input
Output rating
32 VDC, 100 mA (General Purpose)
IDZR1SN
Input
32 VDC, 100 mA (General Purpose)
IDZR1SN-1
Input
32 VDC, 100 mA (General Purpose)
OA202SZN
Output
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
OA202SLN
Output
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
ODX02SN
Output
60 VDC, 2 A (General Purpose)
OD201SN
Output
200 VDC, 1.5 A (General Purpose)
60 VDC, 1 A (Tungsten)
200 VDC, 0.75 A (Tungsten)
412
Solid State Relay
G3R-I/O
Precautions
■ Connection
■ Protective element
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component
when using the SSR under an inductive load.
■ Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
G3R
G3R
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
Solid State Relay
G3R-I/O
413
MEMO
414
Solid State Relay
G3R-I/O
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Solid State Relay
G3R-I/O
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1a
Solid State Relay
06/09
G3R-I/O
Specifications subject to change without notice
Printed in USA
Similar pages