MSMP6.0A thru MSMP20A www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Very low profile - typical height of 0.65 mm eSMP ® Series • Ideal for automated placement • Oxide planar chip junction • Uni-directional polarity only • Peak pulse power: 150 W (10/1000 μs) Top View • ESD capability: 15 kV (air), 8 kV (contact) Bottom View • Meets MSL level 1, per J-STD-020C, LF maximum peak of 260 °C MicroSMP • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VBR 6.67 V to 24.5 V VWM 6.0 V to 20 V PPPM (10 x 1000 μs) 150 W TJ max. 150 °C Polarity Uni-directional Package MicroSMP MECHANICAL DATA Case: MicroSMP Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test TYPICAL APPLICATIONS Polarity: Color band denotes the cathode end Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for protecting sensitive equipment against transient overvoltages. per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (fig. 1) PPPM (1)(2) 150 W IPPM (1) See next table A PD (2) 1.0 (3) 0.5 Peak pulse current with a 10/1000 μs waveform Power dissipation Power dissipation Operating junction and storage temperature range TM = 120 °C TA = 25 °C PD TJ, TSTG W - 55 to + 150 °C Notes (1) Non-repetitive current pulse, per fig. 1 (2) Mounted on 6.0 mm x 6.0 mm copper pads to each terminal (3) Mounted on minimum recommended pad layout Revision: 10-Dec-13 Document Number: 89457 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSMP6.0A thru MSMP20A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE BREAKDOWN VOLTAGE VBR AT IT (1) (V) DEVICE MARKING CODE TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE CURRENT IR AT VWM (μA) MAXIMUM VC AT IPPM MAXIMUM VC AT IPPM RD 10/1000 μs 8/20 μs MIN. MAX. AG 6.67 7.37 10 6.0 200 10.3 MSMP6.5A AK 7.22 7.98 10 6.5 100 11.2 13.4 0.240 14.5 69.0 0.095 MSMP7.0A AM 7.78 8.60 10 7.0 50 12.0 12.5 0.272 15.7 63.7 0.111 0.132 MSMP6.0A VC (V) IPPM (A) RD 14.6 RD () VC (V) IPPM (A) RD () 0.201 0.087 13.7 73.0 MSMP7.5A AP 8.33 9.21 1.0 7.5 50 12.9 11.6 0.317 17.0 58.8 MSMP8.0A AR 8.89 9.83 1.0 8.0 20 13.6 11.0 0.342 18.2 54.9 0.152 MSMP8.5A AT 9.44 10.4 1.0 8.5 2.0 14.4 10.4 0.384 19.5 51.3 0.177 MSMP9.0A AV 10.0 11.1 1.0 9.0 2.0 15.4 9.7 0.441 20.6 48.6 0.195 MSMP10A AX 11.1 12.3 1.0 10 1.0 17.0 8.8 0.533 21.7 46.1 0.204 MSMP11A AZ 12.2 13.5 1.0 11 1.0 18.2 8.2 0.570 24.4 41.0 0.266 MSMP12A BE 13.3 14.7 1.0 12 1.0 19.9 7.5 0.690 25.3 39.5 0.268 MSMP13A BG 14.4 15.9 1.0 13 1.0 21.5 7.0 0.803 27.2 36.8 0.307 MSMP14A BK 15.6 17.2 1.0 14 1.0 23.2 6.5 0.928 29.5 33.9 0.364 MSMP15A BM 16.7 18.5 1.0 15 1.0 24.4 6.2 0.960 32.5 30.8 0.455 MSMP16A BP 17.8 19.7 1.0 16 1.0 26.0 5.8 1.092 34.7 28.8 0.520 MSMP17A BR 18.9 20.9 1.0 17 1.0 27.6 5.4 1.233 36.8 27.2 0.586 MSMP18A BT 20.0 22.1 1.0 18 1.0 29.2 5.1 1.382 39.3 25.4 0.676 MSMP20A BV 22.2 24.5 1.0 20 1.0 32.4 4.6 1.706 42.8 23.4 0.783 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per Fig. 1 and derate per Fig. 3 (3) To calculate maximum clamping voltage at surge current uses the following formula: V CL max. = RD x IPP + VBR max. THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL VALUE RJA (1) 250 RJM (2) 30 UNIT °C/W Notes (1) Free air, mounted on recommended PCB 1 oz. pad area; thermal resistance R JA - junction to ambient (2) Units mounted on PCB with 6.0 mm x 6.0 mm copper pad areas; R JM - junction to mount IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD TEST TYPE TEST CONDITIONS AEC-Q101-001 Human body model (contact mode) C = 100 pF, R = 1.5 k IEC 61000-4-2 (2) Human body model (air discharge mode) (1) C = 150 pF, R = 330 SYMBOL VC CLASS VALUE H3B > 8 kV 4 > 15 kV Notes Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV (2) System ESD standard (1) ORDERING INFORMATION (Example) PREFERRED P/N MSMP6.0A-M3/89A Revision: 10-Dec-13 UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.006 89A 4500 7" diameter plastic tape and reel Document Number: 89457 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSMP6.0A thru MSMP20A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 TJ = 25 °C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50 % of IPPM tr = 10 μs tr = 8 μs Peak Value IPPM CJ - Junction Capacitance (pF) IPPM - Peak Pulse Current (% IRSM) 150 100 Half Value - IPP IPPM 2 50 td = 1000 μs td = 20 μs td 0 1.0 2.0 3.0 Measured at Stand-off Voltage, VWM TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 4.0 6 8 10 12 14 16 18 t - Time (ms) VWM - Reverse Stand-Off Voltage (V) Fig. 1 - Pulse Waveform Fig. 4 - Typical Junction Capacitance 100 20 1.2 Non-Repetitive Pulse Waveform Shown in Fig. 1 TA = 25 °C 10 1 0.1 TA = TM, Mounted on 6.0 mm x 6.0 mm Copper Pad PD - Power Dissipation (W) PPPM - Peak Pulse Power (kW) 100 10 0 0.24" x 0.24" (6.0 mm x 6.0 mm) Copper Pad Areas 1.0 0.8 0.6 Mounted on Minimum Recommende Pad Area 0.4 0.2 0.0 0.01 0.1 1 10 100 1000 25 0 10 000 50 75 100 125 150 175 td - Pulse Width (μs) Ambient Temperature (°C) Fig. 2 - Peak Pulse Power Rating Curve Fig. 5 - Power Dissipation Derating Curve 1000 100 Transient Thermal Impedance (°C/W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) Measured at Zero Bias 75 50 25 0 0 25 50 75 100 125 150 175 TJ - Initial Temperature (°C) Fig. 3 - Pulse Power or Current vs. Initial Junction Temperature Revision: 10-Dec-13 Junction to Ambient 100 10 0.01 0.1 1 10 100 1000 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Document Number: 89457 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSMP6.0A thru MSMP20A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) MicroSMP 0.059 (1.50) 0.043 (1.10) Cathode Band 0.055 (1.40) 0.047 (1.20) 0.030 (0.75) 0.022 (0.55) 0.039 (0.98) 0.031 (0.78) 0.091 (2.30) 0.083 (2.10) 0.106 (2.70) 0.091 (2.30) 0.030 (0.75) 0.022 (0.55) Mounting Pad Layout 0.079 (2.00) 0.029 (0.73) 0.025 (0.63) 0.043 (1.10) 0.011 (0.27) 0.005 (0.12) Revision: 10-Dec-13 0.032 (0.80) 0.032 (0.80) 0.020 (0.50) Document Number: 89457 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000