4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT BY - 20 2 3 1 20 REVISIONS ALL RIGHTS RESERVED. P LTR 1 D 10 1X6 CAGE ASSEMBLY C 2 REFERENCE APPLICATION SPECIFICATION 114-***** FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS 3 DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER 4 DIMENSION APPLIES WITH MODULE INSERTED IN CAGE 5. HEAT SINKS, HEAT SINK CLIPS AND LIGHT PIPES ARE SHIPPED ASSEMBLED ON CAGE 6. MINIMUM PC BOARD THICKNESS: 8 -A- DWN APVD JY 24OCT2013 COMPONENTS CAGE ASSEMBLY: NICKEL-SILVER ALLOY HEAT SINK: ALUMINUM/BLACK ANODIZE HEAT SINK CLIP: STAINLESS STEEL EMI SPRING: COPPER ALLOY/NICKEL PLATE EMI GASKET: PLATED FILLED SILICONE WITH 94 V-0 7. DATUM DATE PRELIMINARY 1. HEAT SINK HEAT SINK CLIP DESCRIPTION - D C SINGLE SIDED: 1.57 MIN DOUBLE SIDED: 3.00 MIN IS TOP SURFACE OF THE HOST BOARD. THESE HOLES ARE OPTIONAL WHEN THE REAR PINS ARE REMOVED. 9. MATES WITH QSFP28 MSA COMPATIBLE TRANSCEIVER. 114.57 DATE CODE (YYWWD) MARKED APPROXIMATELY AS SHOWN. 10 REF 6X 18.75 57.40 0.10 REF -T4 6X 8.90 B 0.10 9.72 A MAX REF B C SEE DETAIL SCALE 2:1 2.05 23.0 WITHOUT NETWORKING 2170723-6 13.7 WITHOUT PCI 2170723-4 16.0 18.50 A 4X 19.00 REAR PINS OPTIONAL SECTION SCALE V-V 7.88 13.7 THIS DRAWING IS A CONTROLLED DOCUMENT. 5X 19.00 DIMENSIONS: mm SEE NOTES - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.2 - SEE NOTES - SAN WITH NETWORKING WITH PCI WITH DWN JASON YANG 2170723-3 2170723-2 2170723-1 APPLICATION 24OCT2013 PART NUMBER PRELIMINARY CHK - APVD - - - TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - 2170723-5 SAN REAR PINS OPTIONAL DIM A MATERIAL 1471-9 (3/13) 16.0 C DETAIL SCALE 6:1 2:1 PRELIMINARY PART- NOT RELEASED FOR PRODUCTION WITHOUT 23.0 3.0 MAX TYP - WEIGHT SIZE - Customer Drawing CAGE ASSEMLBY, 1X6 QSFP28 WITH HEAT SINKS THRU BEZEL, GASKET CAGE CODE A2 00779 DRAWING NO 2170723 SCALE 3:1 SHEET RESTRICTED TO 1 OF - 5 REV 1 A 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT BY - 20 2 3 1 20 REVISIONS ALL RIGHTS RESERVED. P LTR - D 10.15 DATE SEE SHEET 1 DWN APVD - - - D 119.75 MIN PITCH R 0.30 DESCRIPTION ( 1.60 ) -T- BEZEL MAX TYP 43.00 0.30 0.10 C 115.00 0.10 37.00 0.15 0.10 (BOTTOM OF CUT-OUT IN BEZEL TO TOP PCB) C GUIDE PINS PER SPEC SINGLE SIDE MOUNTING SCALE 2:1 119.75 MIN PITCH R 0.30 MAX -T- MAX TYP 0.15 0.10 (BOTTOM OF CUT-OUT IN BEZEL TO TOP PCB) B B 10.15 0.10 0.15 0.10 (BOTTOM OF CUT-OUT IN BEZEL TO TOP PCB) 115.00 BELLY TO BELLY MOUNTING SCALE 2:1 0.10 THIS DRAWING IS A CONTROLLED DOCUMENT. A DIMENSIONS: mm PRELIMINARY PART- NOT RELEASED FOR PRODUCTION MATERIAL SEE NOTES - 1471-9 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.2 - SEE NOTES - DWN JASON YANG 24OCT2013 CHK - APVD - - - TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - Customer Drawing A CAGE ASSEMLBY, 1X6 QSFP28 WITH HEAT SINKS THRU BEZEL, GASKET CAGE CODE A2 00779 DRAWING NO 2170723 SCALE 3:1 SHEET RESTRICTED TO 2 OF - 5 REV 1 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 1 20 REVISIONS ALL RIGHTS RESERVED. BY - 20 2 3 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - -Y- D D 8 110.78 3 BSC 8 4X 16.28 8 6X ( n 1.05 ) REAR PIN HOLES 19.00 1.10 8 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) CROSS HATCHED AREA DENOTES WHEN SURFACE TRACES ARE PERMITTED TYP 8 12.79 C 7.60 3.10 -L- 3X MAX 13.49 MIN C -K- 9.00 9.00 3 BSC 12.49 3.10 7.60 3X A SEE DETAIL 37.00 MAX 41X 1.05 0.05 COMPLIANT PIN HOLE 2 B B -X- HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 19.00 38.00 57.00 76.00 95.00 114.00 116.00 RECOMMENDED PCB LAYOUT SINGLE TYPE PCB TOLERANCE: # 0.05 SCALE 3:1 A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL SEE NOTES - 1471-9 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.2 - SEE NOTES - DWN JASON YANG 24OCT2013 CHK - APVD - - - TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - Customer Drawing A CAGE ASSEMLBY, 1X6 QSFP28 WITH HEAT SINKS THRU BEZEL, GASKET CAGE CODE A2 00779 DRAWING NO 2170723 SCALE 3:1 SHEET RESTRICTED TO 3 OF - 5 REV 1 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 1 20 REVISIONS ALL RIGHTS RESERVED. BY - 20 2 3 P LTR - 3 SEE SHEET 1 DWN APVD - - - BSC D CROSS HATCHED AREA DENOTES WHEN SURFACE TRACES ARE PERMITTED B SEE DETAIL 1.10 12X ( n 1.05 ) REAR PIN HOLES D SEE DETAIL DATE THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) -YD DESCRIPTION 8 8 12.79 C 7.60 -L- BSC MAX 13.49 MIN 3.10 C -K- 3.10 7x 3 12.49 4.50 82X n 1.05 0.05 COMPLIANT PIN HOLE 2 37.00 MAX B B -X19.00 38.00 57.00 HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 76.00 95.00 114.00 116.00 RECOMMENDED PCB LAYOUT BELLY TO BELLY TYPE PCB TOLERANCE: # 0.05 SCALE 3:1 A PRELIMINARY PART- NOT RELEASED FOR PRODUCTION 1471-9 (3/13) THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL SEE NOTES - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.2 - SEE NOTES - DWN JASON YANG 24OCT2013 CHK - APVD - - - TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - Customer Drawing A CAGE ASSEMLBY, 1X6 QSFP28 WITH HEAT SINKS THRU BEZEL, GASKET CAGE CODE A2 00779 DRAWING NO 2170723 SCALE 3:1 SHEET RESTRICTED TO 4 OF - 5 REV 1 4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 REVISIONS P -Y- 110.78 D 1 ALL RIGHTS RESERVED. BY - 20 2 3 16.28 8 4X 8 - 8 110.78 LTR DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 8 19.00 4X 8 19.00 16.28 D 8 -L- -K- DETAIL D SCALE 3:1 C 1.50 C 2X 4.62 TYP 1.50 TYP 2X 4.62 1.50 TYP 1.50 TYP 1.69 B -L- -L1.55 0.05 -L- A MAX 1.55 15.02 0.05 1.55 -L15.02 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: 1.20 PRELIMINARY PART- NOT RELEASED FOR PRODUCTION 0.05 1.20 DETAIL B SCALE 6:1 0.05 DETAIL A SCALE 6:1 MAX -K- 16.80 MAX -K- 16.80 1471-9 (3/13) 3.10 -K3.10 B -K1.55 1.69 MAX mm MATERIAL SEE NOTES - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.2 - SEE NOTES - DWN JASON YANG 24OCT2013 CHK - APVD - - - TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - Customer Drawing A CAGE ASSEMLBY, 1X6 QSFP28 WITH HEAT SINKS THRU BEZEL, GASKET CAGE CODE A2 00779 DRAWING NO 2170723 SCALE 3:1 SHEET RESTRICTED TO 5 OF - 5 REV 1