Murata LQH3NPN330MMR Inductance Datasheet

LQH3NPN330MMR#
“#” indicates a package specification code.
< List of part numbers with package codes >
LQH3NPN330MMRE , LQH3NPN330MMRF
Shape
Notes
When applied Rated current to the Products, Inductance will be within ±30% of
nomonal Inductance value.
When applied Rated current to the Products, temperature rise caused by
self-generated heat shall be limited to 40℃ max.
Keep the temperature (ambient temperature plus self-generation of heat) under
125℃.
References
Packaging
code
L size
3.0 ±0.2mm
W size
3.0 ±0.2mm
Specifications
Minimum quantity
φ330mm Embossed taping
8000
φ180mm̲Embossed taping
2000
Mass (Typ.)
T size
1.4 ±0.1mm
1 piece
Size code in inch (mm)
0.051g
1212 (3030)
Specifications
Inductance
33µH ±20%
Inductance test frequency
1MHz
Rated current (Isat) (Based on Inductance change)
380mA
Rated current (Itemp) (Based on Temperature rise)
600mA
Max. of DC resistance
0.948Ω
Avg. of DC resistance
0.790Ω±20%
Self resonance frequency (min.)
15MHz
Operating temperature range (Self-temperature rise
is included)
-40〜125℃
Operating temperature range (Self-temperature rise
is not included)
-40〜85℃
Class of magnetic shield
Magnetic shield of magnetic
powder in resin
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : http://www.murata.com/
Last updated: 2016/04/21
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Inductance-Frequency characteristics (Typ.)
Inductance-Current characteristics (Typ.)
Temperature rise characteristics (Typ.)
2 of 2
This PDF data has only typical specifications because there is no space
for detailed specifications.
Therefore, please reviewour product specifications or consult the
approval sheet for product specifications before ordering.
Last updated: 2016/04/21
Similar pages