Vishay FEPF16JTHE3 Dual common cathode ultrafast plastic rectifier Datasheet

FEP16xT, FEPF16xT, FEPB16xT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Ultrafast Plastic Rectifier
TO-220AB
FEATURES
ITO-220AB
• Power pack
• Glass passivated pellet chip junction
• Ultrafast recovery time
• Low switching losses, high efficiency
2
3
1
1
FEP16xT
PIN 1
PIN 2
PIN 3
CASE
2
• High forward surge capability
3
• AEC-Q101 qualified
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 245 °C (for TO-263AB package)
FEPF16xT
PIN 1
PIN 2
• Solder dip 275 °C max. 10 s, per JESD 22-B106
(for TO-220AB and ITO-220AB package)
PIN 3
TO-263AB
K
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
2
TYPICAL APPLICATIONS
1
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes, DC/DC
converters, and other power switching application.
FEPB16xT
PIN 1
PIN 2
K
HEATSINK
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
PRIMARY CHARACTERISTICS
IF(AV)
2 x 8.0 A
VRRM
50 V to 600 V
IFSM
200 A, 125 A
trr
35 ns, 50 ns
VF
0.95 V, 1.30 V, 1.50 V
TJ max.
150 °C
Package
TO-220AB, ITO-220AB,
TO-263AB
Diode variations
Common cathode
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs max.
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL FEP16AT FEP16BT FEP16CT FEP16DT FEP16FT FEP16GT FEP16HT FEP16JT UNIT
Maximum repetitive peak reverse
voltage
VRRM
50
Maximum RMS voltage
VRMS
Maximum DC blocking voltage
VDC
Maximum average forward
rectified current at TC = 100 °C
IF(AV)
Peak forward surge current 8.3 ms
single half sine-wave superimposed
on rated load per diode
IFSM
Operating storage and temperature
range
TJ, TSTG
-55 to +150
°C
Isolation voltage (ITO-220AB only)
from terminal to heatsink t = 1 min
VAC
1500
V
100
150
200
300
400
500
600
V
35
70
105
140
210
280
350
420
V
50
100
150
200
300
400
500
600
V
16
200
A
125
A
Revision: 23-Feb-16
Document Number: 88596
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEP16xT, FEPF16xT, FEPB16xT
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous
forward voltage per diode
SYMBOL
FEP
16AT
FEP
16BT
VF (1)
8.0 A
Maximum DC reverse
current per diode at rated DC
blocking voltage
FEP
16CT
FEP
16DT
FEP
16FT
0.95
FEP
16GT
FEP
16HT
1.30
TC = 25 °C
FEP
UNIT
16JT
1.50
V
10
IR
μA
TC = 100 °C
500
Maximum reverse recovery
time per diode
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
Typical junction capacitance
per diode
4.0 V, 1 MHz
CJ
35
50
85
ns
60
pF
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
FEP
FEPF
FEPB
UNIT
RJC
2.2
3.1
2.2
°C/W
Typical thermal resistance from junction to case per diode
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1.85
45
50/tube
Tube
TO-220AB
FEP16JT-E3/45
ITO-220AB
FEPF16JT-E3/45
1.97
45
50/tube
Tube
TO-263AB
FEPB16JT-E3/45
1.35
45
50/tube
Tube
TO-263AB
FEPB16JT-E3/81
1.35
81
800/reel
Tape and reel
TO-220AB
FEP16JTHE3/45 (1)
1.85
45
50/tube
Tube
FEPF16JTHE3/45
(1)
1.97
45
50/tube
Tube
TO-263AB
FEPB16JTHE3/45
(1)
1.35
45
50/tube
Tube
TO-263AB
FEPB16JTHE3/81 (1)
1.35
81
800/reel
Tape and reel
ITO-220AB
Note
(1) AEC-Q101 qualified
Revision: 23-Feb-16
Document Number: 88596
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEP16xT, FEPF16xT, FEPB16xT
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
20
Instantaneous Reverse Leakage
Current (μA)
Average Forward Current (A)
Resistive or Inductive Load
16
12
8
4
0
10
1
TJ = 100 °C
TJ = 25 °C
0.1
0.01
0
50
100
0
150
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics Per Diode
300
1000
TC = 100 °C
8.3 ms Single Half Sine-Wave
250
200
150
100
50
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
50 V to 400 V
500 V to 600 V
Junction Capacitance (pF)
Peak Forward Surge Current (A)
TJ = 125 °C
50 V to 400 V
500 V to 600 V
100
10
0
1
10
100
0.1
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
Instantaneous Forward Current (A)
100
TJ = 125 °C
10
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
1
50 V to 200 V
300 V to 400 V
500 V to 600 V
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Revision: 23-Feb-16
Document Number: 88596
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEP16xT, FEPF16xT, FEPB16xT
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
ITO-220AB
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
PIN
2
0.635 (16.13)
0.625 (15.87)
3
0.160 (4.06)
0.140 (3.56)
0.104 (2.65)
0.096 (2.45)
0.671 (17.04)
0.651 (16.54)
PIN
1
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
3
0.245 (6.22)
MIN.
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
TO-263AB
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
K
2
0.624 (15.85)
0.591 (15.00)
0.055 (1.40)
0.047 (1.19)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
K
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.057 (1.45)
0.045 (1.14)
0.022 (0.56)
0.014 (0.36)
0.190 (4.83)
0.160 (4.06)
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.411 (10.45)
0.380 (9.65)
7° REF.
7° REF.
0.560 (14.22)
0.530 (13.46)
0.205 (5.20)
0.195 (4.95)
2
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.603 (15.32)
0.573 (14.55)
0.057 (1.45)
0.045 (1.14)
0.105 (2.67)
0.095 (2.41)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.145 (3.68)
0.135 (3.43)
7° REF.
0.076 (1.93) REF.
45° REF.
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 23-Feb-16
Document Number: 88596
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages