Wall DTEM10901F 100 - 240vac input voltage range c14, c8, and c6 ac inlet connector type Datasheet

DATASHEET
Rev. A
DTEM1090 SERIES
100~240VAC Input Voltage Range
C14, C8, and C6 AC Inlet Connector Types
70~100 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
IEC-320-C14
IEC-320-C8
IEC-320-C6
FEATURES
 Single Outputs
 100~240VAC Input Voltage Range
 CEC/Energy Star Level V Compliant
 C14, C8, and C6 AC Inlet Connectors Available
 RoHS Compliant
 Optional Output Connectors Available
 Short Circuit and Over Voltage Protection
 Dimensions: 5.96” x 2.31” x 1.35”
 MTBF: > 30,000 Hours
 EN/IEC 60601 and UL60601, 3rd Edition Medical Approvals
DESCRIPTION
The DTEM1090 series of medical AC/DC desktop power supplies provides up to 100 Watts of continuous output
power in a 5.96” x 2.31” x 1.35” package. This series consists of single output models with a wide input voltage
range of 100~240VAC. The DTEM1090 series is RoHS and CEC/Energy Star Level V compliant and has EN/IEC
60601 and UL60601, 3rd edition medical approvals. These models are also protected against over voltage and
short circuit conditions. This series has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and
IEC-320-C6. Please call factory for ordering details.
02/08/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 4
DTEM1090 Series
C14, C8, & C6 Inlet Types
70~100 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. A
SPECIFICATIONS: DTEM1090 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Inrush Current
OUTPUT SPECIFICATIONS
Output Voltage (See Note 2)
Line Regulation
TEST CONDITIONS
Min
100
50
defined by changing ±10% of input voltage
from nominal line and rated load.
240
60
3.15
100
VAC
Hz
A
A
-1
+1
%
-5
+5
See Table
%
A
See Table
Measured at nominal line and full load
with 20MHz limited bandwidth and 0.1µF
ceramic and 47µF aluminum capacitors in
parallel on the output.
350
mVp-p
8.3
3
ms
s
Automatic recovery
Automatic recovery
82
0
-20
5
30,000
%
40
85
95
°C
°C
%
hours
5.96 x 2.31 x 1.35 inches
(151.45 x 58.8 x 34.2 mm)
IEC-320-C14, C8, and C6
1.2 lbs (550g)
Dimensions (L x W x H)
02/08/2012
Unit
0
Hold-up Time
Turn-on Time
PROTECTION
Over Voltage Protection
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency (typical)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
MTBF
PHYSICAL SPECIFICATIONS
AC Inlet Connector (See Note 1)
Weight
SAFETY & EMC
Safety Standards
Compliance
Max
See Table
Load Regulation
Output Current
Minimum Load
Output Power
Ripple & Noise
Typ
UL60601, 3rd Edition, EN/IEC 60601, CE, CB
RoHS, WEEE, CEC/Energy Star Level V
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4
DTEM1090 Series
C14, C8, & C6 Inlet Types
70~100 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. A
MODEL SELECTION TABLE
Model Number
DTEM10901A
DTEM10901B
DTEM10901C
DTEM10901D
DTEM10901E
DTEM10901F
DTEM10902A
DTEM10902B
DTEM10902C
DTEM10902D
DTEM10902E
DTEM10902F
DTEM10903A
DTEM10903B
DTEM10903C
DTEM10903D
DTEM10903E
DTEM10903F
(1)
Input Voltage Range
100 ~ 240 VAC
100 ~ 240 VAC
100 ~ 240 VAC
Output Voltage (2)
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
12 ~ 17 VDC
18 ~ 24 VDC
Output Current
Min
Max
0A
7.5A
0A
5.56A
0A
6.67A
0A
5.0A
0A
5.83A
0A
4.44A
0A
7.5A
0A
5.56A
0A
6.67A
0A
5.0A
0A
5.83A
0A
4.44A
0A
7.5A
0A
5.56A
0A
6.67A
0A
5.0A
0A
5.83A
0A
4.44A
Ripple & Noise (3)
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
350mVp-p
Maximum
Output Power
90W
100W
80W
90W
70W
80W
90W
100W
80W
90W
70W
80W
90W
100W
80W
90W
70W
80W
AC Inlet Type
IEC-320-C14
IEC-320-C8
IEC-320-C6
NOTES
1. The number in red represents the type of AC inlet connector: “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, and “3” for
IEC-320-C6 type.
2. The output voltage is specified as a range (Ex: 18~24VDC); the customer must specify what they want the voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF aluminum
capacitors in parallel on the output.
4. Optional output connectors are available. Please call factory for ordering details.
MECHANICAL DRAWING
Unit: inches (mm)
1.35±0.04 (34.2±1)
2.31±0.04 (58.8±1)
5.96±0.04 (151.45±1)
IEC-320-C14
02/08/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
IEC-320-C8
IEC-320-C6
Page 3 of 4
Rev. A
DTEM1090 Series
C14, C8, & C6 Inlet Types
70~100 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
02/08/2012
(603)778-2300
(888)587-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 4
Similar pages