Inolux IN-S126ASG Smd led 1206 pcb type Datasheet

IN-S126AS series
Side View SMD LED 1206 PCB Type
Features
•
1206 side view SMD LED
•
High Brightness
•
AlInGaP / InGaN Technology
•
Small package
•
High reliability
•
Clear Lens
Description
The IN-S126AS series is a popular low profile 1206
package with versatile design capabilities. It is a PCB
type molding style LED which can be used in various
applications.
Recommended Solder Pattern
Applications
•
Consumer Electronics
•
Wearable
•
Automobile After Market
•
Industrial Equipment
Figure 1. IN-S126AS Solder Pattern
Package Dimensions in mm
Figure 2. IN-S126AS Package Dimensions
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 1
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Absolute Maximum Rating at 25oC (Note 1)
Product
Emission
Color
Pd (mW)
IF (mA)
IN-S126ASYG
Yellow
Green
75
25
IN-S126ASY
Yellow
75
25
IFP* (mA)
VR (V)
TOP (oC)
TST (oC)
5
-30 C~+85 C
70
IN-S126ASA
Amber
75
25
IN-S126ASR
Red
75
25
IN-S126AS5B
Blue
75
25
IN-S126ASG
Green
75
25
IN-S126ASUW
White
75
25
o
o
o
o
-40 C~+90 C
100
Notes
1. Condition for IFP is pulse of 1/10 duty and 0.1msec width
ESD Precaution
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even
though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based
chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.
Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which
may be induced by electrostatic discharge (ESD).
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 2
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Electrical Characteristics T
A
= 25°C (Note 1)
VF(V)
Product
Emission
Color
IN-S126ASYG Yellow Green
Viewing
λ(nm)
Angle
IF(mA)
I*V(mcd)
min
max
λD
λP
△λ
2θ1/2
typ.
20
1.8
2.6
572
576
15
120
56
IN-S126ASY
Yellow
20
1.8
2.6
589
595
15
120
140
IN-S126ASA
Amber
20
1.8
2.6
603
604
20
120
115
IN-S126ASR
Red
20
1.8
2.6
622
625
20
120
140
IN-S126AS5B
Blue
5
2.7
3.1
467
473
30
120
45
IN-S126ASG
Green
20
2.8
3.6
521
527
17
120
720
IN-S126ASUW
White
20
2.8
3.3
X=0.3
Y=0.3
-
-
120
720
Notes
1. Performance guaranteed only under conditions listed in above tables.
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 3
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Chromaticity Bin (for White only)
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 4
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 5
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Typical Characteristic Curves – YG, Y, A, R
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 6
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Typical Characteristic Curves – B, G, W
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 7
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Typical Characteristic Curves – Radiation Pattern
Ordering Information
Product
Technolog Test Current
Emission Color
y
IF (mA)
IN-S126ASYG Yellow Green
Forward
Luminous Intensity
Voltage
IV (mcd)
VF (V)
(Typ.)
(Typ.)
Orderable
Part Number
AllnGaP
20
56
2.2
IN-S126ASYG
IN-S126ASY
Yellow
AllnGaP
20
140
2.2
IN-S126ASY
IN-S126ASA
Amber
AllnGaP
20
115
2.2
IN-S126ASA
IN-S126ASR
Red
AllnGaP
20
140
2.2
IN-S126ASR
IN-S126AS5B
Blue
InGaN
5
45
3.0
IN-S126AS5B
IN-S126ASG
Green
InGaN
20
720
3.2
IN-S126ASG
IN-S126ASUW
White
InGaN
20
720
3.0
IN-S126ASUW
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 8
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Label Specifications
Inolux P/N:
I
N
-
P
3
Material
Inolux
SMD
S = PCB
Type
2
Package
A
T
Variation
Orientation
126A = 3.0 x 1.0 x 1.5 mm
X
S = Side
Mount
Current
(Blank) =
20mA
Lens
Color
(Blank) = Clear
U = Diffused
R=625nm
A=604nm
Y=595nm
YG=576nm
G=527nm
B=473nm
W=White
5=5mA
-
X
X X
X
Customized
Stamp-off
Lot No.:
Z
Internal
Tracker
Inolux Corporation
Proprietary & Confidential
2
0
1
7
Year (2017, 2018, …..)
01
24
001
Month
Date
Serial
March 16, 2017
Page 9
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Packaging Information: 3000pcs Per Reel
Tape Dimension
Reel Dimension
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 10
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Packing Dimension
5 boxes per carton are available depending on shipment quantity.
Specification
Material
Quantity
Carrier tape
Per EIA 481-1A specs
Conductive black tape
3000pcs per reel
Reel
Per EIA 481-1A specs
Conductive black
Label
IN standard
Paper
Packing bag
220x240mm
Aluminum laminated bag/ no-zipper
One reel per bag
Carton
IN standard
Paper
Non-specified
Others:
Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same
bin combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists
of a product label as well.
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 11
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Dry Pack
All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during
transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly
sealed prior to shipment.
Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to shipment.
The packaging sequence is as follows:
Reflow Soldering
• Recommended tin glue specifications: melting temperature in the range of 178~192 OC
• The recommended reflow soldering profile is as follows (temperatures indicated are as measured on
the surface of the LED resin):
Lead-free Solder Profile
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 12
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Precautions
•
•
•
•
•
•
Avoid exposure to moisture at all times during transportation or storage.
Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a
reverse voltage.
Avoid operation beyond the limits as specified by the absolute maximum ratings.
Avoid direct contact with the surface through which the LED emits light.
If possible, assemble the unit in a clean room or dust-free environment.
Reworking
•
•
•
Rework should be completed within 5 seconds under 260 OC.
The iron tip must not come in contact with the copper foil.
Twin-head type is preferred.
Cleaning
Following are cleaning procedures after soldering:
• An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
• Temperature x Time should be 50oC x 30sec. or <30oC x 3min
• Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
• Curing: 100 OC max, <3min
Cautions of Pick and Place
•
•
•
Avoid stress on the resin at elevated temperature.
Avoid rubbing or scraping the resin by any object.
Electro-static may cause damage to the component. Please ensure that the equipment is properly
grounded. Use of an ionizer fan is recommended.
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 13
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Reliability
Item
Precondition
Frequency/ lots/ samples/
failures
For all reliability
monitoring tests according
to JEDEC Level 2
1Q/ 1/ 22/ 0
Solderability
Standards
Reference
J-STD-020
CNS-554
1.) Baking at 85°C for 24hrs
2.) Moisture storage at 85°C/ 60% R.H. for
168hrs
Accelerated aging 155°C/ 24hrs
Tinning speed: 2.5+0.5cm/s
Tinning: A: 215°C/ 3+1s or B: 260°C/ 10+1s
Dipping soldering terminal only
Soldering bath temperature
A: 260+/-5°C; 10+/-1s
B: 350+/-10°C; 3+/-0.5s
1.) Precondition: 85°C bakin g for 24hrs
85°C/ 60%R.H. for 168hrs
2.) Tamb25°C; IF=20mA; duration 1000hrs
Tamb: 85°C
Humidity: 85% R.H., IF=5mA
Duration: 1000hrs
Tamb: 55°C
IF=20mA
Duration: 1000hrs
Tamb25°C, If=20mA,, Ip=100mA, Duty
cycle=0.125 (tp=125μs,T=1sec)
Duration 500hrs)
A cycle: -40 degree C 15min; +85 degree C
15min
Thermal steady within 5 min..
300 cycles
2 chamber/ Air-to-air type
60+3°C
90+5/-10% R.H. for 500hrs
100+10°C for 500hrs
CNS-6118
-40+5°C for 500hrs
JESD22-B102-B
And CNS-5068
CNS-5067
Resistance to
soldering heat
1Q/ 1/ 40/ 0
CNS-11829
Operating life test
High humidity,
1Q/ 1/ 45/ 0
high temperature
bias
1Q/ 1/ 20
High temperature
bias
JESD-A101-B
IN specs.
1Q/ 1/ 40/ 0
Pulse life test
1Q/ 1/ 76/ 0
Temperature
cycle
High humidity
1Q/ 1/ 40/ 0
storage test
High temperature 1Q/ 1/ 40/ 0
storage test
Low temperature 1Q/ 1/ 40/ 0
storage test
Inolux Corporation
Proprietary & Confidential
Conditions
JESD-A104-A
IEC 68-2-14, Nb
CNS-6117
March 16, 2017
Page 14
www.inolux-corp.com
IN-S126AS series
Side View SMD LED 1206 PCB Type
Revision History
Changes since last revision
Initial Release
Page
Version No.
1.0
Revision Date
03-16-2017
DISCLAIMER
INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights, nor the rights of others.
LIFE SUPPORT POLICY
INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the
President of INOLUX or INOLUX CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system, or to affect its safety or effectiveness.
Inolux Corporation
Proprietary & Confidential
March 16, 2017
Page 15
www.inolux-corp.com
Similar pages