Lumileds MXM8-PW35-0000 Luxeon 3535 mid-power led Datasheet

LUXEON 3535 Mid-Power LEDs
Illumination Portfolio
Introduction
LUXEON® 3535 delivers optimized performance in combination with quality of light needed
for distributed light source applications. In addition to delivering specified correlated color
temperature and color rendering combinations, these emitters deliver the efficacy and reliability
required by the indoor illumination markets. This document contains the performance data
needed to design and engineer applications based on these LUXEON 3535 emitters.
Features and Benefits
Key Applications
• High efficacy for sustainable design
• Compact 3535 package
• Minimum 70 and 80 CRI for both indoor and outdoor applications
• ANSI compliant 1/6th color binning
• Supports ENERGY STAR® lumen maintenance certification
requirements
• Lamps
• Indoor Area Lighting
• Downlight
• Outdoor
• Architecture
• High bay & Low bay
LUXEON 3535 Datasheet DS202 ©2013 Philips Lumileds Lighting Company. Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Relative Spectral Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Luminous Efficacy Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. i
General Information
Product Nomenclature
LUXEON Mid-Power Illumination emitters are tested and binned at 100 mA, with current pulse duration of 20 ms. All
characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse
duration of 20 ms.
The part number designations for the MXM8 series is explained as follows:
MXMA-BCDE-IJKL
Where:
A
—
designates minimum CRI performance (value 7 = 70 minimum and 8 = 80 minimum)
B
—
designates radiation pattern (value P = Lambertian)
C
—
designates color (value W = White)
D, E —
designates nominal ANSI CCT (for example, 30 = 3000K and 40 = 4000K)
I, J, K & L — designates additional part numbers
Therefore products in this series with minimum CRI value of 80, CCT of 4000K will have the part numbering scheme:
M X M 8 - PW 4 0
Average Lumen Maintenance Characteristics
Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output
remaining after a specified period of time.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON
Mid-Power LEDs are compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely REACH and the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials
to these LEDs: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl
ethers (PBDE).
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 2
Product Selection
Product Selection for Mid-Power LEDs
Solder Pad Temperature = 25°C, Test Current = 100 mA
Table 1.
Minimum Luminous
Flux (lm)
Typical Luminous
Flux (lm)
10
28
32
10
30
33
82
10
30
34
82
10
32
36
80
82
10
32
36
MXM8-PW57-0000
80
82
10
32
36
MXM8-PW65-0000
80
82
10
32
36
Nominal
CCT
Part
Number
Minimum
CRI
Typical
CRI
Typical
R9
2700K
MXM8-PW27-0000
80
82
3000K
MXM8-PW30-0000
80
82
3500K
MXM8-PW35-0000
80
4000K
MXM8-PW40-0000
80
5000K
MXM8-PW50-0000
5700K
6500K
ɸV
ɸV
Product Selection for Mid-Power LEDs
Solder Pad Temperature = 25°C, Test Current = 100 mA
Table 2.
Nominal
CCT
Part Number
4000K
Color Rendering Index
Minimum Luminous
Flux (lm)
Typical Luminous
Flux (lm)
Minimum
Typical
MXM7-PW40-0000
70
72
32
39
5000K
MXM7-PW50-0000
70
73
32
39
5700K
MXM7-PW57-0000
70
73
32
39
6500K
MXM7-PW65-0000
70
74
32
39
ɸV
ɸV
Note for Tables 1 & 2:
1. Philips Lumileds maintains a tolerance of ± 7.5% on luminous flux and ± 2 on CRI measurements. LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 3
Optical Characteristics
Optical Characteristics of Mid-Power LEDs
Solder Pad Temperature = 25°C, Test Current = 100 mA
Table 3.
Nominal
CCT
Color Temperature CCT
Typical Total
Included Angle [1]
(degrees) u0.90V
Typical
Viewing Angle [2]
(degrees) 2u ½
Minimum
Typical
Maximum
2700K
2550K
2700K
2850K
150
115
3000K
2850K
3000K
3200K
150
115
3500K
3200K
3500K
3750K
150
115
4000K
3750K
4000K
4250K
150
115
5000K
4700K
5000K
5300K
150
115
5700K
5300K
5700K
6000K
150
115
6500K
6000K
6500K
7000K
150
115
Notes for Table 3:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 4
Electrical Characteristics
Electrical Characteristics of Mid-Power LEDs
Thermal Pad Temperature = 25ºC, Test Current = 100 mA
Table 4.
Forward Voltage Vf [1] (V)
Part Number
Minimum
Typical
Maximum
2.80
3.10
3.40
MXM8-PW27-0000
MXM8-PW30-0000
MXM8-PW35-0000
MXM8-PW40-0000
MXM8-PW50-0000
MXM8-PW57-0000
MXM8-PW65-0000
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
DVF / DTJ
Typical Thermal Resistance
Junction to Solder Pad
(°C/W)
Ru J-C
-2.0 to -4.0
20
Notes for Table 4:
1. Philips Lumileds maintains a tolerance of ±0.10V on forward voltage measurements.
2. Measured at Tj between 25°C and 110°C.
Absolute Maximum Ratings
Table 5.
Parameter
Maximum Performance
DC Forward Current (mA) [1]
Peak Pulsed Forward Current (mA)
150
180
[2]
ESD Sensitivity
Class 3A Human Body Model Class C Machine Model
LED Junction Temperature [3]
115°C
Operating Case Temperature at 100 mA
-40°C - 105°C
Storage Temperature
-40°C - 100°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vr) [4], [5]
-5V
Notes for Table 5:
1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 150 mA, and the maximum of the current waveform is
lower than 180 mA.
2. At 10% duty cycle and pulse width 10mS.
3. Proper current derating must be observed to maintain junction temperature below the maximum.
4. LUXEON Mid-Power LEDs are not designed to be driven in reverse bias.
5. At maximum reverse current of 10 µA.
JEDEC Moisture Sensitivity
Table 6.
2
Soak Requirements
Standard
Floor Life
Level
Time
Conditions
Time
Conditions
1 year
[ 30°C /
60% RH
168 Hrs.
+ 5 / - 0 Hrs.
[85°C /
60% RH
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 5
Reflow Soldering Characteristics
300
Tp: 260°C
260°C +0/-5°C
250
Ramp-Up Rate, 3°C/sec. max.
255°C +5/-0°C
TL: 217°C
Temperature ( C)
200
Tsmax : 200°C
tp: 10-30sec. 30sec max.
Tsmin: 150°C
150
ts : 60-120sec.
tL: 60-150 sec,max
100
50
0
0
50
100
150
200
250
300
Time (seconds)
Figure 1. Temperature profile for Table 7.
Table 7. Reflow Profile in Accordance with J-Std-020D.
Profile Feature
Lead Free Assembly
Preheat/Soak :
Temperature Min (Tsmin )
Temperature Max (Tsmax )
Maximum Time (ts ) from Tsmin to Tsmax
150°C
200°C
120 seconds
Ramp-up Rate (TL to Tp )
3°C / second
Liquidous Temperature (TL )
217°C
Maximum Time (tL ) Maintained above TL
150 seconds
Maximum Peak Package Body Temperature (Tp )
260°C
Time (tp ) within 5°C of the specified temperature (Tc )
10-30 seconds
Maximum Ramp-Down Rate (Tp to TL )
6°C / second
Maximum Time 25°C to Peak Temperature
8 minutes
Note for Table 7:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 6
Mechanical Dimensions
3.5
0.05
0.8
3.5
3.8 max
1.5
0.8
R1. 30
Anode Mark
0.5
0.7
2.6
Figure 2. Package outline drawing.
Notes for Figure 2:
1. All dimensions are in millimeters.
2. Tolerance: ±0.10mm.
3. Materials
• Lead Frame: Copper Alloy with Silver Plating
• Package Body: High Temperature Thermal Plastic
• Encapsulant: Silicone Resin
• Solder Lead Finish: Sn-Sn Plating
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 7
Solder Pad Design
Recommended Solder Pad Dimensions
Recommended Pad Layout Dimensions
Additional conductor area
covered by solder mask for
improving heat dissipation
Figure 3. Solder pad layout.
Notes for Figure 3:
1. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB). 2. Application Brief AB202 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com and www.philipslumileds.cn.com.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 8
Relative Spectral Distribution
Relative Intensity vs. Wavelength,
MXM7-PWXX
2.5
4000K
Relative In
ntensity
2.0
5000K
5700K
1.5
4000K
6500K
1.0
5000K
0.5
5700K
6500K
0.0
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 4. Typical color spectrum of MXM7-PWXX emitter, integrated measurement
at solder pad temperature = 25°C, forward current = 100 mA.
Relative Intensity vs. Wavelength,
MXM8-PWXX
2.5
2700K
3000K
2.0
3500K
2700K
4000K
Relative Intensity
R
3000K
5000K
3500K
1.5
5700K
4000K
6500K
1.0
5000K
0.5
5700K
6500K
0.0
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 5. Typical color spectrum of MXM8-PWXX emitter, integrated measurement
at solder pad temperature = 25°C, forward current = 100 mA.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 9
Light Output Characteristics
Relative Flux over Temperature
MXM8-PWXX/MXM7-PWXX
120%
100%
Relative Flux
80%
60%
40%
20%
0%
10
25
40
55
70
85
100
115
Thermal Pad Temperature (C)
Figure 6. Typical relative light output vs. thermal pad temperature, forward current = 100 mA.
Relative Flux vs. Forward Current
MXM8-PWXX/MXM7-PWXX
1.60
Relative F
Flux
1.20
0.80
0.40
0.00
0
25
50
75
100
125
150
Forward Current (mA)
Figure 7. Typical relative luminous flux vs. forward current, solder pad temperature = 25ºC.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 10
Luminous Efficacy Characteristics
Relative Luminous Efficacy vs. Forward Current
MXM8-PWXX/MXM7-PWXX
1.6
1.4
Relativ
ve Luminous Efficac
cy
1.2
1.0
2700K
3000K
0.8
3500K
4000K
0.6
5000K
0.4
5700K
6500K
0.2
00
0.0
0
15
30
45
60
75
90
105
120
135
150
Forward Current (mA)
Figure 8. Typical emitter efficacy versus forward current, solder pad temperature = 25°C.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 11
Forward Current Characteristics
Forward Current vs. Forward Voltage
MXM8-PWXX/MXM7-PWXX
150
Forrward Currrent (mA))
125
100
75
50
25
0
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
Forward Voltage (V)
Figure 9. Typical forward current vs. forward voltage, solder pad temperature = 25°C.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 12
Typical Radiation Patterns
Radiation Pattern in Cartesian Coordinate System
1.25
Relative In
ntensity
1.00
0.75
0.50
0.25
0.00
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angle (Degree)
Figure 10. Typical representative spatial radiation pattern.
Radiation Pattern in Polar Coordinate System
0
-30
30
80%
60%
-60
60
40%
20%
-90
90
-120
120
-150
150
180
Figure 11. Typical polar plot of radiation pattern.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 13
Color Shift vs. Viewing Angle
0.07
0.06
Dx
Dyy
0.05
Dx, Dy
0.04
0.03
0.02
0.01
0.00
-0.01
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angle (Degree)
Figure 12. Typical plot of color shift vs. viewing angle.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 14
Emitter Pocket Tape Packaging
Ø1.50
2.0 ±0.05
4.0 ±0.1
2.2 ±0.1
1.75 ± 0.1
Anode Side
8.0 ±0.1
3.85 ± 0.1
5.5 ±0.1
12 +0.3/-0.1
Anode Mark
Ø1.50 ±0.25/-0.0
0.29 ±0.02
3.75 ±0.1
Figure 13. Emitter pocket tape packaging.
Notes for Figure 13:
1. All dimensions are in millimeters
2. Empty component pockets sealed with top cover tape
3. The maximum number of consecutive missing LEDs is two.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 15
Emitter Reel Packaging
18.4 max
2.0 +0.5/-0.0
180.0 ±0.5
62.5 +0/-2.5
Ø24.0 ±0.5
PART NO:
LOT NO:
MXM8-PW40-5601
Ø13.0 ±0.2
090430-0136959718
QUANTITY: 1998
CAT CODE:
L56X
DATE CODE:
1205
12.4 +2/-0
Figure 14. Emitter reel packaging.
Notes for Figure 14:
1. All dimentions are in millimeters.
2. Empty component pockets sealed with top cover tape.
3. 7 inch reel-1000 pieces per reel.
4. Minimum packing quantity is 500 pieces.
5. The maximum number of consecutive missing LEDs is two.
6. In accordance with EIA-481-1-B specification.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 16
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given in
the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward
voltage (Vf).
Decoding Product Bin Labeling
LUXEON Mid-Power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using
these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K, 6500K emitters are labeled with a four digit alphanumeric CAT code
following the format below.
ABCD A=
Flux bin (L etc.)
B and C = Color bin (For example 51, 52, 53, 54, 55, 56)
D = Vf bin
Luminous Flux Bins
Table 8 lists the standard photometric luminous flux bins for LUXEON Mid-Power emitters (tested and binned at 100 mA).
Although several bins are outlined, product availability in a particular bin varies by production run and by product performance.
Not all bins are available in all colors.
Table 8. Flux Bins - All Colors
Bin Code
Minimum Photometric Flux
(lm)
Maximum Photometric Flux
(lm)
K
28
32
L
32
36
M
36
40
P
40
44
Tested and binned at 25°C, If=100 mA. Tester tolerance: ±7%.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 17
Forward Voltage Bins
Table 9. Vf Bins
Bin Code
Minimum Forward Voltage
(V)
Maximum Forward Voltage
(V)
T
2.8
2.9
V
2.9
3.0
W
3.0
3.1
X
3.1
3.2
Y
3.2
3.3
Z
3.3
3.4
Tested and binned at 25°C, If = 100 mA.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 18
Color Bin Structure
MXM8-PW27-0000 Color Bin Structure
0.450
0.440
0.430
81
0.420
83
85
y
2700K
0.410
0.400
82
84
86
2580
0.390
2870K
0.380
0.370
0.430
0.435
0.440
0.445
0.450
0.455
0.460
0.465
0.470
0.475
0.480
0.485
0.490
x
Figure 15. ANSI 2700K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 10.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM8-PW27-0000 Emitter
Bin Code
x
y
Bin Code
x
y
81
0.4625
0.4729
0.4813
0.4703
0.4113
0.4299
0.4319
0.4130
84
0.4446
0.4546
0.4625
0.4520
0.3910
0.4095
0.4113
0.3927
82
0.4520
0.4625
0.4703
0.4593
0.3927
0.4113
0.4132
0.3944
85
0.4468
0.4562
0.4646
0.4546
0.4077
0.4260
0.4280
0.4095
83
0.4546
0.4646
0.4729
0.4625
0.4095
0.4280
0.4299
0.4113
86
0.4373
0.4468
0.4546
0.4446
0.3893
0.4077
0.4095
0.3910
Notes for Table 10:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 19
Color Bin Structure, Continued
MXM8-PW30-0000 Color Bin Structure
0.445
0.435
0.425
71
0.415
73
75
y
3000K
0.405
0.395
72
74
76
2870K
0.385
3200K
0.375
0.365
0.405
0.410
0.415
0.420
0.425
0.430
0.435
x
0.440
0.445
0.450
0.455
0.460
0.465
Figure 16. ANSI 3000K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 11.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM8-PW30-0000 Emitter
Bin Code
x
y
Bin Code
x
y
71
0.4386
0.4474
0.4562
0.4468
0.4048
0.4228
0.4260
0.4077
74
0.4222
0.4305
0.4386
0.4298
0.3840
0.4019
0.4048
0.3867
72
0.4298
0.4386
0.4468
0.4373
0.3867
0.4048
0.4077
0.3893
75
0.4223
0.4299
0.4387
0.4305
0.3990
0.4165
0.4197
0.4019
73
0.4305
0.4387
0.4474
0.4386
0.4019
0.4197
0.4228
0.4048
76
0.4147
0.4223
0.4305
0.4222
0.3814
0.3990
0.4019
0.3840
Notes for Table 11:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 20
Color Bin Structure, Continued
MXM8-PW35-0000 Color Bin Structure
0.430
0 420
0.420
0.410
61
63
0.400
y
65
0.390
3500K
62
64
0.380
3250K
66
0.370
3750K
0.360
0.380
0.385
0.390
0.395
0.400
0.405
0.410
0.415
0.420
0.425
0.430
0.435
0.440
x
Figure 17. ANSI 3500K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 12.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM8-PW35-0000 Emitter
Bin Code
x
y
Bin Code
x
y
61
0.4130
0.4198
0.4299
0.4223
0.3944
0.4115
0.4165
0.3990
64
0.3975
0.4036
0.4130
0.4061
0.3731
0.3898
0.3944
0.3773
62
0.4061
0.4130
0.4223
0.4147
0.3773
0.3944
0.3990
0.3814
65
0.3943
0.3996
0.4097
0.4036
0.3853
0.4015
0.4065
0.3898
63
0.4036
0.4097
0.4198
0.4130
0.3898
0.4065
0.4115
0.3944
66
0.3889
0.3943
0.4036
0.3975
0.3690
0.3853
0.3898
0.3731
Notes for Table 12:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 21
Color Bin Structure, Continued
MXM7-PW40-0000 Color Bin Structure
0.420
0.410
0.400
51
0.390
53
y
55
0.380
4000K
52
54
0.370
3750K
56
0.360
4250K
0.350
0.340
0.360
0.365
0.370
0.375
0.380
0.385
0.390
0.395
0.400
0.405
0.410
x
Figure 18. ANSI 4000K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 13.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM7-PW40-0000 Emitter
Bin Code
x
y
Bin Code
x
y
51
0.3869
0.3916
0.4006
0.3952
0.3829
0.3987
0.4044
0.3880
54
0.3746
0.3786
0.3869
0.3822
0.3624
0.3777
0.3829
0.3670
52
0.3822
0.3869
0.3952
0.3898
0.3670
0.3829
0.3880
0.3716
55
0.3703
0.3736
0.3826
0.3786
0.3726
0.3874
0.3931
0.3777
53
0.3786
0.3826
0.3916
0.3869
0.3777
0.3931
0.3987
0.3829
56
0.3670
0.3703
0.3786
0.3746
0.3578
0.3726
0.3777
0.3624
Notes for Table 13:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 22
Color Bin Structure, Continued
MXM7-PW50-0000 Color Bin Structure
0.390
0 380
0.380
0.370
31
33
0.360
35
y
5000K
32
0.350
34
4750K
36
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
0.350
0.355
0.360
0.365
x
Figure 19. ANSI 5000K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 14.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM7-PW50-0000 Emitter
Bin Code
x
y
Bin Code
x
y
31
0.3479
0.3493
0.3551
0.3533
0.3580
0.3712
0.3760
0.3624
34
0.3416
0.3425
0.3479
0.3465
0.3408
0.3536
0.3580
0.3448
32
0.3465
0.3479
0.3533
0.3515
0.3448
0.3580
0.3624
0.3487
35
0.3371
0.3376
0.3434
0.3425
0.3493
0.3616
0.3664
0.3536
33
0.3425
0.3434
0.3493
0.3479
0.3536
0.3664
0.3712
0.3580
36
0.3366
0.3371
0.3425
0.3416
0.3369
0.3493
0.3536
0.3408
Notes for Table 14:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 23
Color Bin Structure, Continued
MXM7-PW57-0000 Color Bin Structure
0.370
0.360
21
0.350
23
25
y
0.340
5700K
22
24
5250K
26
0.330
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
x
0.335
0.340
0.345
0.350
Figure 20. ANSI 5700K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 15.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM7-PW57-0000 Emitter
Bin Code
x
y
Bin Code
x
y
21
0.3319
0.3320
0.3376
0.3371
0.3446
0.3565
0.3616
0.3493
24
0.3270
0.3267
0.3319
0.3318
0.3285
0.3399
0.3446
0.3327
22
0.3318
0.3319
0.3371
0.3366
0.3327
0.3446
0.3493
0.3369
25
0.3215
0.3207
0.3263
0.3267
0.3353
0.3462
0.3513
0.3399
23
0.3267
0.3263
0.3320
0.3319
0.3399
0.3513
0.3565
0.3446
26
0.3222
0.3215
0.3267
0.3270
0.3243
0.3353
0.3399
0.3285
Notes for Table 15:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 24
Color Bin Structure, Continued
MXM7-PW65-0000 Color Bin Structure
0.365
0 355
0.355
0.345
11
0.335
13
y
15
6500K
0.325
12
6000K
14
16
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 21. ANSI 6500K 1/6th color bin structure, forward current = 100 mA, thermal pad temperature = 25°C.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 16.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXM7-PW65-0000 Emitter
Bin Code
x
y
Bin Code
x
y
11
0.3158
0.3146
0.3206
0.3213
0.3317
0.3422
0.3481
0.3371
14
0.3119
0.3103
0.3158
0.3170
0.3162
0.3263
0.3317
0.3212
12
0.3170
0.3158
0.3213
0.3221
0.3212
0.3317
0.3371
0.3261
15
0.3048
0.3028
0.3087
0.3103
0.3209
0.3304
0.3363
0.3263
13
0.3103
0.3087
0.3146
0.3158
0.3263
0.3363
0.3422
0.3317
16
0.3068
0.3048
0.3103
0.3119
0.3113
0.3209
0.3263
0.3162
Notes for Table 16:
1. Tester tolerance: ±0.01 in x and y coordinates.
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company. 25
Company Information
Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output, efficacy
and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and
enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power
plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop
lighting, home lighting, digital imaging, display and automotive lighting.
Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and
white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose,
Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to
bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED
products and solid-state lighting technologies can be found at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although
Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company
neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice.
You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.
©2013 Philips Lumileds Lighting Company. All rights reserved.
LUXEON is a registered trademark of the Philips Lumileds Lighting
Company in the United States and other countries.
www.philipslumileds.com
www.philipslumileds.cn.com
LUXEON 3535 Datasheet DS202 20130228
Similar pages