LIGITEK LPTV34443-A-PF Npn silicon phototransistor led lamp Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
NPN SILICON PHOTOTRANSISTOR LED LAMPS
Pb
Lead-Free Parts
LPTV34443/A-PF
DATA SHEET
DOC. NO :
QW0905- LPTV34443/A-PF
REV.
:
A
DATE
:
03 - Jul. - 2015
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/5
PART NO.LPTV34443/A-PF
Package Dimension
Features
. High illumination sensitivity
. Stable characteristics
. Spectrally and mechanically
matched with visible light LED
5.0 5.6
4.3
5.3
Description
The LPTV34443/A-PF series are silicon
nitride passivated NPN planar
phototransistors with exceptionally
stable characteristics and high
illumination sensitivity the cases of
LPTV34443/A-PF are encapsulated in
water clear plastic T1 3/4 package
individualt
1.5MAX
25.0MIN
∅0.5
TYP
1.0MIN
1.COLLECTOR
2.EMITTER
2.54TYP
1
2
Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted
2.Specifications are subject to change without notice
•MAXIMUM RATINGS(Ta=25℃)
MAXIMUM RATINGS
UNIT
100
mw
Collector-Emitter Voltage
30
V
Emitter-Collector Voltage
3
V
PARAMETER
Power Dissipation
Operating Temperature
-50℃ TO +100℃
Storage Temperature
-50℃ TO +100℃
Lead Soldering Temperature(1.6mm From Body)
260℃ for 5 seconds
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO.LPTV34443/A-PF
Page 2/5
•ELECTRICAL CHARACTERISTICS(Ta=25℃)
Typ.
SYMBOL
Min.
Collector-Emitter
Breakdown Voltage
V(BR)CEO
30
V
Ic=1mA
Ev=0Lux
Emitter-Collector
Breakdown Voltage
V(BR)ECO
3
V
IE=100μA
Ev=0Lux
Collector-Emitter
Saturation Voltage
VCE(sat)
0.4
V
Ic=2mA
Ev=1000Lux
50
nA
VCE =5V
Ev=0Lux
VCE =5v Ev=10Lux
CCT=2865K
Collector Dark
Current
On State Collector
Current
0.2
ICEO
Ip(on)
Max.
TEST CONDITION
PARAMETER
UNIT
15
25
40
uA
60
100
140
uA
150
190
230
uA
The peak wavelength
λP
630
nm
spectral
sensitivity of
the wavelength
range
∆λ
400-650
nm
Half angle
2θ
80
°
Rise time
Tr
10
us
Fall time
Tf
10
us
VCE =5v Ev=50Lux
CCT=2865K
VCE =5v Ev=100Lux
CCT=2865K
VCE=5V,RSS=10kohm
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO.LPTV34443/A-PF
Page 3/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350°C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(° C)
260° C3sec Max
260°
5° /sec
max
120°
25°
0°
VCE =5v Ev=10Lux
CCT=6000K
2° /sec
max
0
Preheat
50
100
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/5
PART NO.LPTV34443/A-PF
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=85 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5℃
2.RH=90 %~95 %
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hours.
1.Ta=105 ℃±5℃&-40 ℃±5℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
Thermal Shock Test
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11
Page 5/5
PART NO.LPTV34443/A-PF
PACKING SPECIFICATION
1. 500PCS / BAG
2. 8 BAG / INNER BOX
SIZE : L X W X H 33.5cm X 19cm X 7.5cm
L
W
H
3. 12 INNER BOXES / CARTON
SIZE : L X W X H 58.5cm X 34cm X 34cm
L
W
C/NO:
MADE IN CHINA
.
NO
M
IT E Y :
Q'T ,:
W :
N,
,
W
G,
S
PC
s
kg
s
kg
H
Similar pages