EPCOS B5201 Saw if filter cdma base station, rx Datasheet

SAW Components
SAW IF Filter
CDMA base station, Rx
Series/Type:
Ordering code:
B5201
B39181-B5201-H510
Date:
Version:
Jul 16, 2008
2.0
 EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B5201
183.6 MHz
Low-Loss Filter
Data sheet
Revision History: Changes compared to previous iteration issue
ISSUE
ORIGINATOR
DETAIL SPEC CHANGES
DATE
0.1
M.Stoerkle
initial release
03.12.2007
M. Stoerkle
selectivity around 185.5 MHz relaxed
24.01.2008
LT64A
1.0
IL improved to 12 dB
single ended matching proposal added
B5201
2.0
M. Stoerkle
fc adjusted to enable widened passband
spec(+/-0.68 MHz) and improve selectivity at upper stopband to initial DG value
Please read cautions and warnings and
important notes at the end of this document.
2
Jul 16, 2008
16.07.2008
SAW Components
B5201
183.6 MHz
Low-Loss Filter
Data sheet
Application
■ Low-loss IF filter for CDMA base station, re■
■
■
■
ceive path (Rx)
Usable passband 1.36 MHz
Unbalanced or balanced operation possible
High near-by selectivity
Temperature stable
Features
7,62
1,0
mm3
Package size 13.3 x 6.5 x 1.6
Package code DCC12A
RoHS compatible
Approx. weight 0.4 g
Ceramic package for Surface Mount Technology (SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Filter surface passivated
3
2,3
10
9
8
1,6
Input
Balanced Input or Input ground
Output
Balanced Output of Ouput ground
To be grounded
Case ground
Please read cautions and warnings and
important notes at the end of this document.
7
6
3,81
Pin configuration
10
1
5
6
3, 8
2, 4, 7, 9
5
bottom view
side view
top view
13,3
■
■
■
■
■
■
4
1,7
2
6,5
■
■
■
■
■
1
3
Jul 16, 2008
SAW Components
B5201
183.6 MHz
Low-Loss Filter
Data sheet
Characteristics
Operating temperature range: T = 0 to +85 ˚C
Terminating source impedance: ZS= 1 kΩ || 0.75 pF bal or 50 Ω single ended and matching network
Terminating load impedance: ZL= 1 kΩ || 0.75 pF bal or 50 Ω single ended and matching network
min.
Nominal frequency
fN
—
typ.
@ 25˚C
183.6
Minimum insertion attenuation
(including matching network)
αmin
—
10
12.0
dB
1.36
—
1.57
3.1
—
3.6
MHz
MHz
αrel ≤ 1 dB
αrel ≤ 40 dB
Passband width
B1dB
B40dB
max.
—
MHz
Amplitude ripple (p-p)
fN ± 0.68 MHz
∆α
—
0.4
1.0
dB
Phase ripple (rms)
fN ± 0.68 MHz
∆ϕ
—
0.9
2.0
˚ rms
—
2120
—
ns
—
2.0
3.5
%
—
53 1)
—
dB
40
471)
—
dB
—
1.5:1
2.0:1
TCf
—
–0.036
—
ppm/K2
T0
—
35
—
˚C
τ
Absolute group delay
mean value within fN ± 0.68 MHz at 25 ˚C
fN ± 0.68 MHz
EVM
Alternate channel suppression
fN ± 1.845 MHz ... fN ± 3.075 MHz
ACS
Relative attenuation (relative to αmin)
fN ± 1.8 MHz ...fN ± 40 MHz
αrel
Error vector magnitude
VSWR (input and output) fN ± 0.68 MHz
Temperature coefficient of frequency 2)
Turnover temperature
1)
2)
for balanced operation degraded to 44 dB typical
Temperature dependance of fc: fc(TA) = fc(T0) (1 + TCf(TA – T0)2)
Maximum ratings
Operable temperature range T
–40/+85
˚C
Storage temperature range
Tstg
–40/+85
˚C
DC voltage
VDC
0
V
Input Power
PIN
10
dBm
Please read cautions and warnings and
important notes at the end of this document.
4
Jul 16, 2008
SAW Components
B5201
183.6 MHz
Low-Loss Filter
Data sheet
Matching network to 1 kΩ || 0.75 pF balanced:
(element values depend on PCB layout):
Ls1
Ls4
Lp2
1 kΩ II 0.75 pF
Ls4
Ls1
Ls1 = 68 nH
1 kΩ II 0.75 pF
Lp3
Lp2 = 33 nH
Lp3 = 39 nH
Ls4 = 220 nH
Matching network to 50 Ω single ended :
(element values depend on PCB layout):
Cp1 = 56 pF
Ls2 = 47 nH
Please read cautions and warnings and
important notes at the end of this document.
Ls3 = 47 nH
5
Jul 16, 2008
Cp4 = 47 pF
SAW Components
B5201
183.6 MHz
Low-Loss Filter
Data sheet
Transfer function
Transfer function (passband)
Please read cautions and warnings and
important notes at the end of this document.
6
Jul 16, 2008
SAW Components
B5201
183.6 MHz
Low-Loss Filter
Data sheet
References
Type
B5201
Ordering code
B39181-B5201-H510
Marking and Package
C61157-A7-A94
Packaging
F61074-V8163-Z000
Date Codes
L_1126
S-Parameters
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction of
the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending
Directive 2002/95/EC of the European Parliament and of the
Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and
electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 16 July 2008. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
Jul 16, 2008
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
8
Jul 16, 2008
Similar pages