AIMTEC AMEPR10D-4025AZUW Up to 0.7a | ac-dc led driver Datasheet

Click on Series name for product info on aimtec.com
Series AMEPR10D-AZ
up to 0.7A | AC-DC LED driver
FEATURES:
Models
Single output
Model
AMEPR10D-5020AZ+Suffix②
AMEPR10D-4025AZ+Suffix②
AMEPR10D-3630AZ+Suffix②
AMEPR10D-3035AZ+Suffix②
AMEPR10D-1564AZ+Suffix②
AMEPR10D-1270AZ+Suffix②
①






AC-DC Constant current LED Driver
Input range 90-264VAC/47-440Hz
High Efficiency up to 81%
Operating temperature -20 to 80°C
Total Harmonic Distortion < 20%
5 Year Limited Warranty





Over Temperature Protection
IP20 and IP67 Case
Active PFC with TRIAC dimmable②
SCP, Over Voltage Protection
Leading or Trailing Edge Triac
Max
Output
Power
(W) ①
Output
Voltage
Range
(V)
No Load
Output
Voltage
(V max.)
Output
Current
(A)
Input Voltage
(VAC/Hz)
10
10
10.8
10.5
9.6
8.4
36-50
30-40
24-36
15-30
8-15
5-12
62
62
52
34
23
23
0.2
0.25
0.3
0.35
0.64
0.7
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
Efficiency
(%)
115
VAC
230
VAC
78
81
80
77
77
78
79
80
81
78
76
79
Exceeding the maximum output power will permanently damage the converter.
Model Nomenclature for Ordering:
Add Suffix “-UD”
Add Suffix “-UW”
Add Suffix “-110D”
Add Suffix “-110W”
Add Suffix “-220D”
Add Suffix “-220W”
②
Universal AC input 90-264VAC (no TRIAC dimming option), IP20
Universal AC input 90-264VAC (no TRIAC dimming option), IP67
AC input 90-135VAC, IP20
AC input 90-135VAC, IP67
AC input 180-264VAC, IP20
AC input 180-264VAC, IP67
NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C,
humidity<75%, nominal input voltage (115/230VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/termssale
AMEPR10D-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with
the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are
prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or
cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge
suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations
prior to installation may damage sensitive equipment permanently.
Input Specifications
Parameters
Inrush current <2ms (cold start)
Leakage current
Current (Full Load)
Power Factor
External fuse (slow blow)
Start up time
www.aimtec.com
F 052.1e R3.P
Conditions
Typical
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
Recommended slow blow Type
15
25
0.2
0.25
110
55
Units
A
mA
mA
0.9
0.9
1
200
Tel: +1 514 620 2722
1 of 4
Maximum
A
ms
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR10D-AZ
up to 0.7A | AC-DC LED driver
Output Specifications
Parameters
Conditions
Typical
Maximum
Units
Current accuracy
±7
Line regulation
(LL-HL)
±10
Load regulation
0-100% load
±7
3
Ripple & Noise ③
Hold-up time
1
Minimum Load Voltage
See the models table
③Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) or (C/C) and 47µF (E/C) parallel capacitor.
%
%
%
V p-p
ms
Isolation Specifications
Parameters
Conditions
Tested I/O voltage
Isolation Resistance
Typical
60 sec
Maximum
Units
3000
VAC
MΩ
>1000
General Specifications
Parameters
Conditions
Typical
Switching frequency
Over load protection
Over voltage protection
Short circuit protection
Over temperature protection
Operating temperature
Maximum
65
110
≥110
Auto recovery
Units
KHz
%
%
>105°C
With derating over 55°C
(for IP67 case)
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Humidity
Case material
Wires
Weight
Dimensions (L X H X W)
MTBF
oC
-20 to +80
100
oC
oC
-40 to +95
±0.02
Free air convection
% / oC
95
Plastic
UL1015 Input 18AWG*10CM/ Output 20 AWG * 10CM
IP20
160
IP67
200
133 x 33 x 30mm (5.24 x 1.30 x 1.18 inch)
>400,000 hrs (MIL-HDBK-217F at +25°C)
% RH
g
Environment Approval
Test
Shock
Vibration
Parameters
Wave form
Acceleration amplitude
Bump duration
Converter operation
Number of bumps
Test mode
Displacement
Acceleration
Converter operation
www.aimtec.com
F 052.1e R3.P
Conditions
Half sine wave
5gn
30 ms
Before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1 mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
Before and after test, body mounted (on chassis)
Tel: +1 514 620 2722
2 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR10D-AZ
up to 0.7A | AC-DC LED driver
Safety Specifications
Parameters
Agency approvals
Standards
cULus, CE, FCC
EN61347-1, EN61347-2-13, IEC62384, UL8750, UL60950-1, EN55015, EN55024, FCC part 15 Subpart B, Class B,
ANSI C63.4 :2003
Harmonic Current Emissions
IEC/EN 61000-3-2, Class C
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity
IEC 61000-4-2 Level 3
RF, Electromagnetic Field Immunity
IEC 61000-4-3 Level 2
Electrical Fast Transient/Burst Immunity
IEC 61000-4-4 Level 2
Surge Immunity
IEC 61000-4-5 Level 1
RF, Conducted Disturbance Immunity
IEC 61000-4-6 Level 2
Power frequency Magnetic Field Immunity
IEC 61000-4-8 Level 2
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
Dimensions
www.aimtec.com
F 052.1e R3.P
Tel: +1 514 620 2722
3 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR10D-AZ
up to 0.7A | AC-DC LED driver
Temperature Graph
Triac Dimming Feature
Triac Device
LED Lighting
Application
LED Driver
AC
Line (Brown)
Aimtec
Neutral (Blue)
Red (+)
Black (-)
Earth
Ground
Triac Dimming Notes:
A- The triac device can be installed on either Line or Neutral
B- Aimtec LED drivers have been designed to function with a wide
range of available Triac devices, however the following list of Triac
devices have been tested.
1) Company: LUTRON
Series: SKYLARK
Model: SF-10P-WH (input voltage: 120Vac)
Model: SF-12P-277-WH (input voltage 277Vac)
2) Company LUTRON
Series: DIVA
Model: DVF-103P-WH (input voltage: 120Vac)
Model: DVF-103P-277-WH (input voltage: 277Vac)
3) Company BERKER
Model: 2867 10 (input voltage:230Vac)
If the power voltage range is 90~135Vac, triac suggested use model
SF-10P-WH or DVF-103P-WH.
If the power voltage range is 180~260Vac, triac suggested use
model SF-12P-277-WH or DVF-103P-277-WH.
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet.
www.aimtec.com
F 052.1e R3.P
Tel: +1 514 620 2722
4 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Similar pages