ITT L202112MS02Q2 Miniature slide switch Datasheet

C&K L Series
Miniature Slide Switches
Features/Benefits
• Positive detent
• Enclosed housing
• Maintained and momentary functions
• PC and panel mounting
• RoHS compliant
Typical Applications
• Communications equipment
• Lighting devices
Models Available
Slide
J
Specifications
Materials
CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS
@ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @
125 V DC (UL/CSA). See page I-23 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
HOUSING: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL94V-2), black.
‘13’ actuator, natural (standard).
CONTACTS: Q contact material: Copper, silver plated. See page
J-22 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
J-22 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-19 through J-23. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
L202 DPDT
L203 DP3T
L101 SPST
L102 SPDT
L103 SP3T
L104 SP4T
L112 SPDT, mom.
L113 SP3T, mom. to one end
L123 SP3T, mom. to both ends
L201 DPST
L204 DP4T
L212 DPDT, mom.
Actuator
01 .200" high
02 .335" high
03 .375" high
05 .312" high
11 .100" high
12 Screwdriver slot
13 Plunger without cap
14 Plunger with .200" dia. cap
15 Plunger with .310" dia. cap
17 Plunger with .458" dia. cap
19 Plunger with .590" dia. cap
Detent
1 With detent
2 Without detent
Mounting Style
MS PC Thru-hole
MA Right angle, PC thru-hole
ML Right angle, PC thru-hole
MV Right angle, PC thru-hole
SS Panel with mounting ears
TS Panel with integral mounting ears
Terminations
02 PC Thru-hole
01 Solder lug with notch
03 Solder lug with hole
04 PC Thru-hole
10 PC Thru-hole
06 Wire wrap
12 PC Thru-hole
Contact Material
Q Silver
B Gold
G Gold over silver
Seal
NONE No seal
E Epoxy seal
Cap Color
2 Black
NONE No cap
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–18
www.ittcannon.com
C&K L Series
Miniature Slide Switches
SWITCH AND LOCK FUNCTION
NO.
POLES
SP
MODEL
NO.
SWITCH FUNCTION
AVAILABLE
MOUNTING
STYLES
SCHEMATIC
L101
SPST
ML, MS, SS
L102
SPDT
ML, MS, SS
L112
SPDT-MOM.
L103
SP3T
1 2 3
NO.
POLES
ML, MS,MV, SS
MODEL
NO.
SWITCH
FUNCTION
AVAILABLE
MOUNTING
STYLES
SCHEMATIC
L201
DPST
MA, MS, SS
L202
DPDT
MA, MS, SS
L212
DPDT-MOM.
MA, MS, TS
DP
SP3T-MOM. to one end
MA, MS, TS
L123
SP3T-MOM. to both ends
MA, MS, TS
L104
SP4T
J
L203
DP3T
MS, TS
L204
DP4T
MS
MS
NOTE: and MOM. in table indicates momentary action.
All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
Models with ‘01’ termination option
only.
Contacts make on side actuator thrown.
CAP COLOR
ACTUATOR
ACTUATOR
ACTUATOR OPTIONS FOR ‘MS, MA, ML, SS, & TS’ MOUNTING STYLES
01
.200" HIGH
02
03
.335" HIGH
.375" HIGH
05
.312" HIGH
15
PLUNGER WITH CAP
11
12
.100" HIGH
SCREWDRIVER SLOT
NOTE: No actuator color option code is required. Standard actuator color is
black, other colors and heights available, consult Customer Service Center.
See pages J-20 and J-22 for available mounting styles.
ACTUATOR OPTIONS FOR ‘MV’ MOUNTING STYLE
13
PLUNGER WITHOUT CAP
14
PLUNGER WITH CAP
Cap part number 7089
17
19
PLUNGER WITH CAP
Cap part number 8018
OPTION
CODE
PLUNGER WITH CAP
2
NONE
ACTUATOR CAP
COLORS
BLACK
01-13, 23 ACTUATORS
Other colors available,
consult Customer Service Center.
Cap part number 7982
Cap part number 8940
ACTUATOR CAPS
SPLASH CAPS
Caps supplied are not installed standard. To order actuator options ‘14 thru 29,’ select
desired cap color from chart and place option code in last box of ordering format. Leave box
empty for all other actuator options. Caps may also be ordered separately and user installed,
see pages J-23 and J-24. Specify the four digit part number and desired cap color. For
switches without caps, order ‘13’ or ‘23’ actuator option. Cap finish: gloss (excluding square
cap part number 7982, finish: matte).
New protective splash caps for PC mounted slide
switches are available separately and reusable.
They provide splash protection during soldering and
cleaning processes. To order specify correct part
number, see page J-23.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–19
www.ittcannon.com
Slide
L113
MV
C&K L Series
Miniature Slide Switches
DETENT
1
WITH DETENT
Standard with all maintained models: L101, L102, L103, L104, L113, L201, L202, L203 and L204.
2
WITHOUT DETENT
Standard with all momentary models: L112, L123, and L212.
MOUNTING STYLE
MS
Slide
J
PC THRU-HOLE, 2 POSITION MODELS
.288
(7,32)
.200
(5,08)
.425
(10,79)
.760
(19,30)
.200
(5,08)
.125 TYP
(3,18)
.181 TYP
(4,60)
.070 TYP
(1,78)
.221 TYP
(5,61)
AVAILABLE WITH:
.225 TYP
(5,71)
.050 X .020 TYP
(1,27) X (0,51)
.150 TRAVEL
(3,81)
6
5
4
.225 TYP
(5,70)
3
2
1 .181 TYP
(4,60)
.065 DIA
(1,65) TYP
TERMINAL NOS. FOR
REFERENCE ONLY
PC MOUNTING
For mounting information, see
TERMINATIONS section, page J-21.
Splash caps are available separately
and reusable, see page J-23.
PC THRU-HOLE, 3 POSITION MODELS
.358
(9,09)
.425
(10,80)
Models: L101, L102, L112, L103, L113 L123,
L201, L202, L203, L104 and L204
Terminations: 02, 06, 10 and 12
Actuators: 01, 02, 03, 05, 11 and 12
L203011MS02Q
DP3T
.225
(5,08)
.181 TYP
(4,60)
.941
(23,90)
.160 TYP
(4,06)
TRAVEL
.200
(5,08)
.125
(3,18)
.070 TYP
(1,78)
.200
(5,08)
.226
(5,74)
PC THRU HOLE, 4 POSITION MODELS
.425
(10,79)
.288
(7,32)
.200
(5,08)
.170 TRAVEL
(4,32) TYP
.225 TYP
(5,71)
.050 X .020 TYP
(1,27) X (0,51)
10
9
8
7
6
1.122
(28,50)
.181 TYP
(4,60)
.050 TYP
(1,27)
.070 TYP
(1,78)
5
4
3
2
1 .181 TYP
(4,60)
.225 TYP
(5,70)
.065 DIA
(1,65) TYP
TERMINAL NOS. FOR
REFERENCE ONLY
.232 TYP
(5,89)
MA
RIGHT ANGLE, PC THRU-HOLE
.550
(13,97)
.412
(10,46)
.335
(8,51)
AVAILABLE WITH:
.181 TYP
(4,60)
Models: L201, L202, L113 and L123
Terminations: 04
Actuators: 02 and 12
.100
(2,54)
PC MOUNTING
.800
(20,32)
.130
(3,30)
TRAVEL
.200
(5,08)
For mounting information, see
TERMINATIONS section, page J-21.
.100 TYP
(2,54)
.125
(3,16)
.215
(5,46)
.256
(6,50)
Splash caps are available separately
and reusable, see page J-23.
.272
(6,91)
L202021MA04Q
Horizontal Actuation
DPDT
RIGHT ANGLE, PC, SP-3 POSITION MODELS
.400
(10,16)
.335
(8,51)
.100 TYP
(2,54)
.412
(10,46)
.140
(4,06)
TRAVEL
0.941
(23,90)
.200
(5,08)
0.125
(3,18)
4
3
2
1
.181 TYP
(4,60)
TERM. NOS. FOR
REFERENCE ONLY
4
3
2
1
.100 TYP
(2,54)
.256
(6,50)
.215
(5,46)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–20
www.ittcannon.com
C&K L Series
Miniature Slide Switches
MOUNTING STYLE
ML
RIGHT ANGLE, PC THRU-HOLE
AVAILABLE WITH:
Models: L101, L102, L112
Terminations: 04
Actuators: 01, 02, 05, 11 and 12
PC MOUNTING
For mounting information, see
TERMINATIONS section, page J-21.
Splash caps are available separately
and reusable, see page J-23.
L102021ML04Q
Horizontal Actuation
SPDT
MV
J
RIGHT ANGLE, PC THRU-HOLE
Slide
AVAILABLE WITH:
Models: L112 and L212
Terminations: 02, 06, 10 and 12
Actuators: 13 thru 19
PC MOUNTING
SS
For mounting information, see
TERMINATIONS section, page J-21.
L212132MV02Q
Splash caps are available separately
and reusable, see page J-23.
DPDT
PANEL WITH MOUNTING EARS
PANEL MOUNTING
.358
(9,09)
.425
(10,60)
.181 TYP
(4,60)
L202011SS03Q
1.200
(30,48)
1.000
(25,40)
.150
(3,81)
TRAVEL
TS
.760
(19,30)
4
.200
(5,08)
6
3
5
2
4
1
1.000
(25,40)
.360
(9,14)
.110 DIA
(2,79ø) TYP
.070 TYP
(1,78)
.240
.060 (6,10)
(1,52)
.200
(5,08)
.125
(3,18)
DPDT
6
5
.135
(3,43)
.225
(5,72)
AVAILABLE WITH:
Models: L101, L102, L112, L201 and L202
Terminations: 01, 02, 03, 06, 10, 12
Actuators: 01, 02, 03, 05, 11 and 12
PANEL WITH INTEGRAL MOUNTING EARS
PANEL MOUNTING
.425
(10,80)
1.000
(25,40)
.941
(23,90)
L203011TS03Q
DP3T
.070 TYP
(1,78)
.240
(6,10)
7
6
.160 TYP
(4,06)
TRAVEL
5
.200
(5,08)
.181
(4,60)
TYP
.125
(3,18)
.200
(5,08)
.358
(9,09)
.100 DIA TYP
(2,54ø)
.125 R TYP
(3,18)
.840
(21,34)
8
4
7
3
6
2
5
1
.135
(3,43)
1.000
(25,40)
.530
(13,46)
.110 DIA
(2,79ø)
.225
(5,72)
.324
(8,23)
AVAILABLE WITH:
Models: L103, L113, L123 and L203
Terminations: 01, 02, 03, 06, 10, 12
Actuators: 01, 02, 03, 05, 11 and 12
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–21
www.ittcannon.com
C&K L Series
Miniature Slide Switches
TERMINATIONS
‘MS, MV, SS & TS’ Mounting Styles Only
02
01
PC THRU-HOLE
.226
(5,74)
.060
(1,52)
.050
(1,27)
.028
(0,71)
‘01’ terminations
12
Slide
.263
(6,68)
.080
(2,03)
PC THRU-HOLE
.226
(5,74)
.240
(6,10)
.272
(6,91)
.050
(1,27)
.020 THK.
(0,51)
.080
(2,03)
.080
(2,03)
.046
(1,17)
.020 THK.
(0,51)
only.
‘MA & ML’ Mounting Styles Only
06
PC THRU-HOLE
J
.085
(2,16)
.080
(2,03)
.020 THK.
(0,51)
.020 THK.
(0,51)
10
SOLDER LUG WITH HOLE
.240
(6,10)
.062
(1,57)
.080
(2,03)
03
SOLDER LUG WITH NOTCH
WIRE WRAP
.065
(1,65)
.080
(2,03)
.219
(10,64)
.050
(1,27)
04
PC THRU-HOLE
.445
(11,30)
.050
(1,27)
.020 THK.
(0,51)
.020 THK.
(0,51)
.256
(6,50)
.085
(2,16)
.080
(2,03)
.050
(1,27)
.020 THK.
(0,51)
.181 TYP.
(4,60)
.181 TYP.
(4,60)
.181 TYP.
(4,60)
.187 TYP.
(4,75)
.272
(6,91)
.065 DIA
(1,65ø)
TYP.
.225
(5,72)
.065 DIA
(1,65ø)
TYP.
.065 DIA
(1,65ø
TYP.
All models with ‘04’
terminations and
‘ML’ mounting style.
All 2 position models,
except ‘04’ terminations.
.181 TYP.
(4,60)
.272
(6,91)
.181 TYP.
(4,60)
.225
(5,72)
.065 DIA
(1,65ø)
TYP.
All 2 position models
with ‘04’ terminations
and ‘MA’ mounting style.
.065 DIA
(1,65ø)
TYP.
All 2 position models
with ‘04’ terminations
and ‘MA’ mounting style.
.181 TYP.
(4,60)
.272
(6,91)
.225
(5,72)
.065 DIA
(1,65ø)
TYP.
All 3 position models,
except ‘04’ terminations.
.065 DIA
(1,65ø)
TYP.
All 3 position models,
with ‘10’ terminations.
All 4 position models,
with ‘10’ terminations.
CONTACT MATERIAL
OPTION
CODE
RoHS
COMPLIANT
RoHS
COMPLIANT
CONTACT
MATERIAL
Q
YES
YES
SILVER 2
B
YES
YES
GOLD 1
G
YES
YES
RATINGS
LX0X, LX1X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC;
0.5 AMP @ 125 V DC (UL/CSA).
LX6X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC
(UL/CSA).
LOW LEVEL/DRY
CIRCUIT
POWER
0.4 VA MAX. @20 V AC OR DC max.
GOLD OVER
LOW LEVEL/DRY
SILVER 3
CIRCUIT OR POWER
LX0X, LX1X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @
125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL/CSA).
LX6X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
3
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options (except ‘01’ termination) when ordered with
‘G’ or ‘Q’ contact material.
Models with ‘01’ termination option
only.
NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
SEAL
NONE
E
NO SEAL
EPOXY SEAL
EPOXY
.075 MAX.
(1,91)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–22
www.ittcannon.com
C&K L Series
Miniature Slide Switches
AVAILABLE HARDWARE
Cap
Compatible with 13-19 actuators
Cap
Compatible with 13-19 actuators
.310 DIA.
(7,87 )
.375 DIA.
(9,53 )
.200 DIA.
(5,08 )
.120
(3,05)
Cap
Compatible with 13-19 actuators
.138
(3,51)
.250
(6,35)
.250
(6,35)
.120
(3,05)
.155
(3,94)
PART NO.
PART NO.
PART NO.
708902000 BLACK
708903000 RED
752702000 BLACK
752703000 RED
801802000 BLACK
801803000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Cap
Compatible with 13-19 actuators
Cap
Compatible with 13-19 actuators
J
Slide
Cap
Compatible with 13-19 actuators
.450 SQ.
(11,43)
.195
(4,95)
.240
(6,10)
PART NO.
PART NO.
PART NO.
PART NO.
894002000 BLACK
894003000 RED
894102000 BLACK
894103000 RED
484602000 BLACK
484603000 RED
798202263 BLACK
798203000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
Cap
Compatible with 01-05 actuators
Splash Cap
Splash Cap
Fits ‘MV’ mounting style,
LX1X models only.
Fits ‘MS’ mounting style,
LXX1 & LXX2 models only.
PART NO.
120100602 BLACK
PART
NO.
Material: Nylon
Finish: Matte
120100200
PART NO.
120100300
Material: Nylon
Material: Nylon
Splash Cap
NOTE: Other colors available,
consult Customer Service Center.
PART NO.
Fits ‘MA’ mounting style,
LXX3 models only.
120100400
Material: Nylon
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–23
www.ittcannon.com
Similar pages