DC-DC Converter SIP-Package DAE-1 SERIES, 1WATT, 1KVDC, UNREGULATED FEATURES: 3 years warranty 1000Vdc isolation voltage Single, dual, isolated twin output models Operating temperature range -40°C to +85°C Model Input voltage (Vdc) Output voltage (Vdc) Output current (mA) Min. Max. Efficiency Typ. DAE1-0511 5 20 200 80% DAE1-0512 9 11 110 80% DAE1-0513 12 8.3 83 80% DAE1-0514 15 6.8 68 80% DAE1-0515 24 4.2 42 80% DAE1-0521 ±5 10 100 80% DAE1-0522 ±9 5.5 55 80% ±12 4 40 80% DAE1-0524 ±15 3.3 33 80% DAE1-0525 ±24 2.1 21 80% DAE1-0501 5, 5 10 100 80% DAE1-0502 9, 9 5.5 55 80% DAE1-0503 12, 12 4 40 80% DAE1-0504 15, 15 3.3 33 80% DAE1-0505 24, 24 2.1 21 80% DAE1-1211 5 20 200 80% DAE1-1212 9 11 110 80% DAE1-1213 12 8.3 83 80% DAE1-1214 15 6.8 68 80% DAE1-1215 24 4.2 42 80% DAE1-1221 ±5 10 100 80% ±9 5.5 55 80% DAE1-1223 ±12 4 40 80% DAE1-1224 ±15 3.3 33 80% DAE1-1225 ±24 2.1 21 80% DAE1-1201 5, 5 10 100 80% DAE1-1202 9, 9 5.5 55 80% DAE1-1203 12, 12 4 40 80% DAE1-0523 DAE1-1222 www.pairuigroup.com 5(4.5~5.5) 12(10.8~13.2) Page: 1/5 Date: 12/15/2013 DC-DC Converter SIP-Package DAE-1 SERIES, 1WATT, 1KVDC, UNREGULATED Model Input voltage (Vdc) Output voltage (Vdc) Output current (mA) Efficiency Typ. Min. Max. 15, 15 3.3 33 80% 24, 24 2.1 21 80% DAE1-2411 5 20 200 80% DAE1-2412 9 11 110 80% DAE1-2413 12 8.3 83 80% DAE1-2414 15 6.8 68 80% DAE1-2415 24 4.2 42 80% DAE1-2421 ±5 10 100 80% DAE1-2422 ±9 5.5 55 80% ±12 4 40 80% DAE1-2424 ±15 3.3 33 80% DAE1-2425 ±24 2.1 21 80% DAE1-2401 5, 5 10 100 80% DAE1-2402 9, 9 5.5 55 80% DAE1-2403 12, 12 4 40 80% DAE1-2404 15, 15 3.3 33 80% DAE1-2405 24, 24 2.1 21 80% DAE1-1204 DAE1-1205 DAE1-2423 12(10.8~13.2) 24(21.6~26.4) Notes: other input and output models may available on request. ELECTRICAL Line regulation --- ±1.2% Load regulation 10% ~ 100% full load Ripple and noise --- 100mVp-p max. Isolation voltage --- 1000Vdc Operating temperature range --- -40°C to +85°C MTBF --- 3.5x106Hrs 15%max. Notes: All the data in this article are under test with “TA+25°C, humidity<75%, rated input and rated load” mode. www.pairuigroup.com Page: 2/5 Date: 12/15/2013 DC-DC Converter SIP-Package DAE-1 SERIES, 1WATT, 1KVDC, UNREGULATED MECHANICAL Single output CONNECTION PIN ISOLATED SINGLE DUAL 1 +Vin +Vin +Vin 2 GND GND GND 4 -Vo -Vo -Vo1 5 No Pin COM +Vo1 6 +Vo +Vo -Vo2 7 No Pin No Pin +Vo2 # TWIN Note: Dual output * Unit is mm(inch). Isolated twin output www.pairuigroup.com Page: 3/5 Date: 12/15/2013 DC-DC Converter SIP-Package DAE-1 SERIES, 1WATT, 1KVDC, UNREGULATED TEMPERATURE PROFILE CAPACITIVE LOADS SELECTION Single Output Cin (Vdc) (μF) 5 4.7 5 10 ±5 4.7 12 2.2 9 4.7 ±9 2.2 24 1 12 2.2 ±12 1 - - 15/24 1 ±15 4.7 www.pairuigroup.com Voltage Cout Dual Output Vin (μF) (Vdc) Page: 4/5 Voltage (Vdc) Cout (μF) Date: 12/15/2013 DC-DC Converter SIP-Package DAE-1 SERIES, 1WATT, 1KVDC, UNREGULATED NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT In order to ensure the efficiency and dependability of the module, the minimum specified load must be less than 10% of rated load. If the output power is low, we recommend to add an external 10% loading resistor in parallel. FUSE: depends on the actual input current; TVS: depends on the actual input voltage; Recommended capacitor: C1,C2,C5,C8, about 0.1uF; for C6,C7,C9, please check the capacitive load; C3,C4: 2KV/1nF. www.pairuigroup.com Page: 5/5 Date: 12/15/2013