ETC2 FN405-10-02 Pcb-mounting filter pcb filters fn 405 Datasheet

PCB-mounting filter
PCB Filters FN 405
Rated currents from 0.5 to 10 A
Compact PCB-mountable design
Approvals
Low profile
The FN 405 PCB filter is a single-phase filter designed
for easy and fast PCB-mounting. Choosing the FN 405
product line brings you the rapid availability of a
standard filter associated with the necessary safety
acceptance. Standard PCB single-phase filters are a
practical solution helping you to pass EMI system
approval in a short time. A selection on amperage
ratings are designed to offer you the desired standard
product.
Features and benefits
Good conducted attenuation performance, based
on chokes with high saturation resistance and
excellent thermal behavior
PCB through hole mounting
Low profile
Technical specifications
Maximum continuous operating voltage
Operating frequency
Rated currents
High potential test voltage
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230V (Mil-HB-217F)
Custom specific versions on request
250 VAC, 50/60 Hz
dc to 400 Hz
0.5 to 10 A @ 40 °C max.
P –> PE 2000 VAC for 2 sec
P –> N 760 VAC for 2 sec
-25 °C to +100 °C (25/100/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/
UL 94 V-0
1,600,000 hours
Typical applications
Electrical and electronic equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
2
EMC/EMI Products
Schaffner Group
Datasheets
2014
Filter selection table
Filter
FN 405-0.5-02
FN 405-1-02
Rated current
Leakage current*
Inductance
[A]
[μA]
1 (1.2)
6 (6.9)
@ 40 °C (25 °C)
0.5 (0.6)
3 (3.6)
FN 405-3-02
FN 405-6-02
FN 405-10-02
@ 230 VAC/50 Hz
10 (11.5)
Capacitance
Cx
Cy
[mH]
[nF]
[nF]
373
10
15
2.2
373
0.8
373
373
373
L
24
15
2.2
2
15
2.2
0.5
15
2.2
15
Resistance
R
Input/Output
connections
[kΩ]
-02
-02
2.2
-02
-02
* Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Product selector
Typical electrical schematic
For example: FN 405-0.5-02, FN 405-10-02
Typical filter attenuation
Per CISPR 17; A = 50 Ω/50 Ω sym; B = 50 Ω/50 Ω asym; C = 0.1 Ω/100 Ω sym; D = 100 Ω/0.1 Ω sym
0.5 and 1 A types
3 and 6 A types
Mechanical data
All dimensions in mm; 1 inch = 25.4 mm
Tolerances according: ISO 2768-m / EN 22768-m
10 A types
-02
Weight
[g]
40
40
40
40
40
3
EMC/EMI Products
Headquarters, global
innovation and development
center
Switzerland
Schaffner Group
Nordstrasse 11
4542 Luterbach
T +41 32 6816 626
F +41 32 6816 630
[email protected]
http://www.schaffner.com
Schaffner Group
China
Schaffner EMC Ltd. Shanghai
T20-3, No 565 Chuangye Road
Pudong New Area
201201 Shanghai
T +86 21 3813 9500
F F +86 21 3813 9501 / 02
[email protected]
http://www.schaffner.com.cn/
France
Schaffner EMC S.A.S.
112, Quai de Bezons
Boîte postale 133
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
[email protected]
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
[email protected]
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
[email protected]
© 2014 Schaffner Group
The content of this document has been
carefully checked and understood. However,
neither Schaffner nor its subsidiaries assume
any liability whatsoever for any errors or
inaccuracies of this document and the
consequences
thereof.
Published
speci cations are subject to change without
notice. Product suitability for any area of
application must ultimately be determined by
the customer. In all cases, products must
never be operated outside their published
speci cations. Schaffner does not guarantee
the availability of all published products. This
disclaimer shall be governed by substantive
Swiss law and resulting disputes shall be
settled by the courts at the place of business
of Schaffner Holding AG. Latest publications
and a complete disclaimer can be
downloaded from the Schaffner website. All
trademarks recognized.
2014
Sales and application centers
Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 19 35 72 71
[email protected]
To nd your local partner within Schaffner‘s
global network, please go to:
www.schaffner.com
Datasheets
Japan
Schaffner EMC K.K.
1-32-12, Kamiuma, Setagaya-ku
7F Mitsui-seimei Sangenjaya Bldg.
154-0011 Tokyo
T +81 3 5712 3650
F +81 3 5712 3651
[email protected]
http://www.schaffner.jp
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial Estate
408705 Singapore
T +65 6377 3283
F +65 6377 3281
[email protected]
Spain
Schaffner EMC España
Edificio E, Alcobendas
El Soto de la Moraleja Alcobendas
28109 Madrid
T +34 618 176 133
[email protected]
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
[email protected]
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 6816 626
F +41 32 6816 641
[email protected]
Taiwan R.O.C.
Schaffner EMV Ltd.
6 Floor, No. 413
Rui Guang Road
114 Neihu District Taipei City
T +886 2 87525050
F +886 2 87518086
[email protected]
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang Amphur Muangg
P.O. Box 14
51000 Lamphun
T +66 53 58 11 04
F +66 53 58 10 19
[email protected]
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane Wokingham
RG41 2PL Berkshire
T +44 118 9770070
F +44 118 9792969
[email protected]
http://www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
08837 Edison, New Jersey
T +1 800 367 5566
T +732 225 9533
F +732 225 4789
[email protected]
http://www.schaffner.com/us
Schaffner MTC LLC
6722 Thirlane Road
24019 Roanoke, Virginia
T +276 228 7943
F +276 228 7953
http://www.schaffnerusa.com
Schaffner Trenco LLC
2550 Brookpark Road
44134 Cleveland, Ohio
T +216 741 5282
F +216 741 4860
www.schaffner-trenco.com
Similar pages