FERRITE WIRE WOUND INDUCTORS AISC-0402F Pb RoHS/RoHS II Compliant 1.1 x 0.6 x 0.6mm FEATURES: APPLICATIONS: • Higher inductance values than other 0402 inductors • Ferrite construction for high current rating • Inductance values: 18nH – 200nH; 5% tolerance available • Camcorders, LED TVs and other electronic devices STANDARD SPECIFICATIONS: Operating Temperature: -40ºC to +85ºC Storage Temperature: -10ºC to +40ºC, 70% RH max. in tape and reel Part Number AISC-0402FInductance Code Units Symbol AISC-0402F-18N AISC-0402F-33N AISC-0402F-48N AISC-0402F-70N AISC-0402F-96N AISC-0402F-R13 AISC-0402F-R16 AISC-0402F-R22 Inductance Tolerance L Test Freq. Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency nH L 18 33 48 70 96 130 160 200 J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M MHz Freq. 100 100 100 100 100 100 100 100 Ω DCR 0.046 0.065 0.078 0.120 0.160 0.230 0.330 0.470 mA Ir 1400 1300 1100 820 730 640 480 390 MHz S.R.F 3000 1800 1400 1300 1100 1000 900 800 Test Equipment Inductance (L): Agilent 4287A+Agilent 16197A or equivalent, -13dBm or 10mA DC Resistance (DCR): HIOKI 3540 or equivalent Q Factor (Q): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Self-Resonant Frequency (SRF): Agilent4991B+Agilent16197A and HP 8753E or equivalent, -20dBm or 50mV Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 40oC against chip initial surface temperature PART NUMBER IDENTIFICATION - AISC-0402F- Inductance Code Tolerance Code Packaging Please refer to the Table J: ± 5% T: 10kpcs/reel K: ± 10% M: ± 20% ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.29.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com FERRITE WIRE WOUND INDUCTORS AISC-0402F Pb RoHS/RoHS II Compliant 1.1 x 0.6 x 0.6mm OUTLINE DIMENSIONS: A B C D Typ. E F H REF. I REF. J REF. 1.1±0.1 0.6±0.1 0.6±0.1 0.25 0.5±0.1 0.2±0.1 0.65 0.35 0.50 Materials Dimension: mm No. A B C D Components Coating Core Wire Electrodes Material Ultraviolet epoxy resin Ferrite Polyurethane system enameled copper wire Ag-Pd with Ni and Sn plating REFLOW PROFILE: Peak 260 ºC max 260ºC 217 ºC Max Ramp Up Rate=3 ºC /s ec . Max Ramp Down Rate=6 ºC /sec . 60〜90s ec . 200 ºC • • • • • • Preheat condition: 150 ~200oC/60~120sec. Allowed time above 217 oC: 60~90sec. Max temp: 260 oC Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max 150 ºC 60〜120sec . 25 ºC Time 25 ºC to Peak =8 min max ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.29.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com FERRITE WIRE WOUND INDUCTORS AISC-0402F Pb RoHS/RoHS II Compliant 1.1 x 0.6 x 0.6mm TAPE & REEL: T= tape and reel (10,000pcs/reel) A B P K 0.75±0.05 1.32±0.05 2.0±0.1 0.75±0.05 T 0.8±0.1 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.29.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com