Murata MEV1x1509xC 3kvdc isolated 1w single & dual output dc/dc converter Datasheet

MEV1 Series
www.murata-ps.com
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
„
Wide temperature performance at full
1 Watt load, –40°C to 85°C
„
UL 94V-0 package material
„
No heatsink required
„
Industry standard pinout
„
3kVDC isolation (1 minute) ‘Hi Pot Test’
„
5V, 12V, 15V, 24V, & 48V inputs
„
5V, 9V, 12V, & 15V output
„
Fully encapsulated with toroidal
magnetics
„
No external components required
„
No electrolytic or tantalum capacitors
PRODUCT OVERVIEW
The MEV series is the new high performance
version of our 1W NMV series. The MEV series
is more efficient and offers improved regulation
performance from 1.8% for applications where a
wide output voltage variation can not be tolerated.
They are ideally suited for providing local supplies
on control system boards with the added benefit
of 3kVDC galvanic isolation to reduce switching
noise. The MEV series is currently available in an
industry SIP 7 or DIP 14 package.
5.4
4.2
4.6
4.5
4.5
3
3
2.5
4
2.5
2.3
2.5
3.3
2.2
2
1.8
3.3
2.4
2
1.9
5.4
4.2
5.0
4.4
4.6
3
3.1
2.5
4
2.6
2.3
2.5
3.4
2.3
2
1.8
%
81
83.5
84
85
80
83
85.5
83.5
80
82.5
83.5
85
79
81
82
82
75.5
78.5
78
79
81
83
84
84
80
82
84
83
79
81
83
84
79
82
83
83
84
86.5
87
87.5
84
86
88
88
83.5
86.5
87.5
89
84
86.5
87.5
87.5
79.5
82
82
82.5
84
86.5
87
87.5
84
86
88
88
83.5
86.5
87.5
89
84
86.5
87.5
87.5
pF
38
42
40
39
28
50
70
59
32
52
63
87
38
56
72
83
34
54
63
74
39
40
39
38
34
50
52
60
32
52
63
87
38
55
73
84
kHrs
7684
7698
7175
6496
7569
7317
6647
6279
7167
6906
6523
5916
7391
6490
6772
5957
7354
7120
7088
7238
6884
6732
6153
5419
6644
6434
5653
5267
6332
6114
5767
5002
6488
5693
5736
4915
Package Style
Efficiency (Typ)
mVp-p
20
30
12
20
10
20
8
15
12
15
8
15
7
15
7
15
10
20
8
20
6
15
6
15
12
20
8
20
7
15
7
15
19
35
13
25
10
20
9
20
15
30
9
20
8
15
8
15
11
20
8
15
7
15
6
15
11
25
7
20
6
15
6
15
16
30
9
20
7
15
6
15
Efficiency (Min)
6.2
5.5
5.5
5
5
3.3
3.6
2.9
5
3.5
3.5
3.5
5
3.5
3.5
3
5
3.5
3
3
6.5
5.5
5.7
5.5
5.5
3.5
3.7
3.3
5.2
3.3
3
3.2
4.5
3.3
3
3
%
233
227
226
225
98
96
94
94
79
77
76
76
50
48
48
48
26
25
26
26
234
228
228
226
98
96
93
94
79
77
76
75
50
48
48
48
Ripple & Noise (Max)2
Load Regulation (Typ)
Input Current at
Rated Load
mA
MTTF3
„
Power density to 0.85W/cm3
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
200
111
84
67
Isolation Capacitance
„
Efficiency to 89% (Typ.)
V
5
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
5
9
12
15
Ripple & Noise (Typ)2
„
RoHS compliant
V
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
48
48
48
48
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
Load Regulation (Max)
„
UL 60950 Recognized
Output Current
FEATURES
MEV1S0505SC
MEV1S0509SC
MEV1S0512SC
MEV1S0515SC
MEV1S1205SC
MEV1S1209SC
MEV1S1212SC
MEV1S1215SC
MEV1S1505SC
MEV1S1509SC
MEV1S1512SC
MEV1S1515SC
MEV1S2405SC
MEV1S2409SC
MEV1S2412SC
MEV1S2415SC
MEV1S4805SC
MEV1S4809SC
MEV1S4812SC
MEV1S4815SC
MEV1S0505DC
MEV1S0509DC
MEV1S0512DC
MEV1S0515DC
MEV1S1205DC
MEV1S1209DC
MEV1S1212DC
MEV1S1215DC
MEV1S1505DC
MEV1S1509DC
MEV1S1512DC
MEV1S1515DC
MEV1S2405DC
MEV1S2409DC
MEV1S2412DC
MEV1S2415DC
Output Voltage
Order Code
Nominal Input Voltage
SELECTION GUIDE - SINGLE OUTPUT1
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
1. For dual output variants, see page 2.
2. See Ripple & Noise characterisation method.
3. Calculated using MIL-HDBK-217F FN2 with nominal input voltage at full load.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
KDC_MEV1.F05 Page 1 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
%
85
87
87.5
88
85
87
89.5
88.5
84.5
87
88
90.5
84
86
88
88
80
83
84
85
85
87
87.5
88
85
87
89.5
88.5
84.5
87
88
90.5
84
86
88
87.5
pF
42
42
38
38
33
53
64
74
33
47
67
112
36
52
78
81
32
54
79
79
42
42
38
38
33
53
64
74
33
47
67
112
36
52
78
81
kHrs
4585
4565
4114
3544
4179
4679
3932
3362
4058
4171
3746
3127
4648
4574
4009
3232
4791
3843
3301
2977
4585
4565
4114
3544
4179
4679
3932
3362
4058
4171
3746
3127
4648
4574
4009
3232
Package Style
82
84
85
85
81
83
85
85
81
83
84
87
81
83
85
84
77
80
81
82
82
84
85
85
81
83
85
85
81
83
84
87
81
83
85
84
MTTF3
35
30
25
25
35
25
20
20
35
30
25
20
35
35
30
25
50
40
35
30
35
30
25
25
35
25
20
20
35
30
25
20
35
35
30
25
mVp-p
Isolation Capacitance
14
11
9
9
13
10
8
7
14
10
8
7
13
12
10
9
21
14
13
12
14
11
9
9
13
10
8
7
14
10
8
7
13
12
10
9
Efficiency (Typ)
6.5
5.2
5.4
5.2
4.5
3.5
3.4
3
4.0
2.9
3.0
3.0
4.0
2.7
2.7
2.4
3.3
2.4
2.2
2.2
6.5
5.2
5.4
5.2
4.5
3.5
3.4
3
4
2.9
3.0
3.0
4
2.7
2.7
2.4
%
Efficiency (Min)
5.1
4.1
4.2
4.0
3.8
2.7
2.7
2.2
3.3
2.2
2.1
2.3
2.9
1.9
1.8
1.5
2.6
1.6
1.4
1.3
5.1
4.1
4.2
4.0
3.8
2.7
2.7
2.2
3.3
2.2
2.1
2.3
2.9
1.9
1.8
1.5
Ripple & Noise (Max)2
233
228
228
225
98
95
93
94
78
76
76
75
49
47
47
47
26
25
25
25
233
228
228
225
98
95
93
94
78
76
76
75
49
47
47
47
mA
Ripple & Noise (Typ)2
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
±100
±56
±42
±33
Load Regulation (Max)
V
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
±5
±9
±12
±15
Load Regulation (Typ)
V
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
48
48
48
48
5
5
5
5
12
12
12
12
15
15
15
15
24
24
24
24
Input Current at
Rated Load
Output Current
MEV1D0505SC
MEV1D0509SC
MEV1D0512SC
MEV1D0515SC
MEV1D1205SC
MEV1D1209SC
MEV1D1212SC
MEV1D1215SC
MEV1D1505SC
MEV1D1509SC
MEV1D1512SC
MEV1D1515SC
MEV1D2405SC
MEV1D2409SC
MEV1D2412SC
MEV1D2415SC
MEV1D4805SC
MEV1D4809SC
MEV1D4812SC
MEV1D4815SC
MEV1D0505DC
MEV1D0509DC
MEV1D0512DC
MEV1D0515DC
MEV1D1205DC
MEV1D1209DC
MEV1D1212DC
MEV1D1215DC
MEV1D1505DC
MEV1D1509DC
MEV1D1512DC
MEV1D1515DC
MEV1D2405DC
MEV1D2409DC
MEV1D2412DC
MEV1D2415DC
Output Voltage
Order Code
Nominal Input Voltage
SELECTION GUIDE - DUAL OUTPUT1
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
SIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
1. For single output variants, see page 1.
2. See Ripple & Noise characterisation method.
3. Calculated using MIL-HDBK-217F FN2 with nominal input voltage at full load.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.
www.murata-ps.com/support
KDC_MEV1.F05 Page 2 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
INPUT CHARACTERISTICS
Parameter
Voltage range
Reflected ripple current
Conditions
Min.
Typ.
Max.
Continuous operation, 5V input types
Continuous operation, 12V input types
Continuous operation, 15V input types
Continuous operation, 24V input types
Continuous operation, 48V input types
5V input types
12V input types
15V input types
24V input types
48V input types
4.5
10.8
13.5
21.6
43.2
5
12
15
24
48
11
5
3.5
4.7
22
5.5
13.2
16.5
26.4
52.8
20
15
10
15
50
Units
Conditions
TA=-40°C to 85°C
Min.
Typ.
Max.
Units
1
W
1.05
1.1
%/%
Typ.
Max.
Units
V
mA p-p
OUTPUT CHARACTERISTICS
Parameter
Rated Power
Voltage Set Point Accuracy
Line regulation
See tolerance envelope
High VIN to low VIN
ISOLATION CHARACTERISTICS
Parameter
Conditions
Min.
Isolation test voltage
Resistance
Flash tested for 1 minute
Viso= 1000VDC
3000
10
VDC
GΩ
GENERAL CHARACTERISTICS
Parameter
Switching frequency - single output types
Switching frequency - dual output types
Conditions
Min.
Typ.
5V input types
12V input types & MEV1Sx1515xC
24V input types & MEV1Sx1505SxC, MEV1Sx1509SxC, MEV1Sx1512SxC
48V input types
MEV1D4812xC, MEV1D4815xC
MEV1D05xxC, MEV1D1212xC, MEV1D1515xC, MEV1D4805xC, MEV1D4809xC
MEV1D1205xC, MEV1D2412xC
60
75
85
65
55
60
75
MEV1D1209xC, MEV1D1215xC, MEV1D1505xC, MEV1D1512xC, MEV1D2405xC,
MEV1D2415xC
80
MEV1D1509xC, MEV1D2409xC
90
Max.
Units
kHz
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Specification
Storage
All output types
-40
-50
Case Temperature above ambient
Cooling
24V & 48V input types
All other types
Free air convection
Typ.
Max.
Units
85
125
20
15
°C
ABSOLUTE MAXIMUM RATINGS
Lead temperature 1.5mm from case for 10 seconds
Input voltage VIN, MEV05 types
Input voltage VIN, MEV12 types
Input voltage Vin, MEV15 types
Input voltage Vin, MEV24 types
Input voltage Vin, MEV48 types
300°C
7V
15V
18V
28V
54V
www.murata-ps.com/support
KDC_MEV1.F05 Page 3 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
TEMPERATURE DERATING GRAPH
TOLERANCE ENVELOPE
5%
85°C
1.0
0.5
Output Voltage
Output Power (W)
1.5
Safe Operating Area
100
50
0
Ambient Temperature (°C)
l Loa
VNOM
10
0
-40
2%
Typic
a
25
d Lin
50
e
0%
75
-4%
100
Output Load Current (%)
150
The voltage tolerance envelope shows typical load regulation characteristics for this
product series. The tolerance envelope is the maximum output voltage variation due to
changes in output loading.
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage,
applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions MEV1 series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 3kVDC for 1 minute.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
The MEV1 has been recognized by Underwriters Laboratory for functional insulation, both input and output should normally be maintained within SELV limits i.e. less than 42.4V
peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system.
The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the barrier
must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according
to safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials,
construction and environment. The MEV1 series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While
parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically
polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We
therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage.
This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
SAFETY APPROVAL
The MEV1 series has been recognized by Underwriters Laboratory (UL) to UL 60950 for functional insulation in a maximum still air ambient temperature of 85°C and/or case temperature limit (case temperature measured on the face opposite the pins) as follows:
MEV1SxxxxSC: 130ºC
MEV1SxxxxDC: 130ºC
MEV1DxxxxSC: 94ºC
MEV1DxxxxDC: 96ºC
The MEV1 Series of converters are not internally fused so to meet the requirements of UL 60950 an anti-surge input line fuse should always be used with ratings as defined below.
MEV1x05xxxC: 1A
MEV1x12xxxC: 0.375A
MEV1x15xxxC: 0.375A
MEV1x24xxxC: 0.2A
MEV1x48xxxC: 0.1A
All fuses should be UL recognized and rated to at least the maximum allowable DC input voltage.
File number E151252 applies.
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of
300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped
over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in
this series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
www.murata-ps.com/support
KDC_MEV1.F05 Page 4 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
APPLICATION NOTES
Minimum load
The minimum load to meet datasheet specification is 10% of the full rated load across the specified input voltage range. Lower than 10% minimum loading will result in
an increase in output voltage, which may rise to typically double the specified output voltage if the output load falls to less than 5%.
Capacitive loading and start up
Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of 10μF, are shown in the table below. The product
series will start into a capacitance of 47μF with an increased start time, however, the maximum recommended output capacitance is 10μF.
MEV1x0505xC
MEV1x0509xC
MEV1x0512xC
MEV1x0515xC
MEV1x1205xC
MEV1x1209xC
MEV1x1212xC
MEV1x1215xC
MEV1x1505xC
MEV1x1509xC
Start-up time
μs
585
1550
2700
4320
605
1750
3000
4800
660
1720
MEV1x1512xC
MEV1x1515xC
MEV1x2405xC
MEV1x2409xC
MEV1x2412xC
MEV1x2415xC
MEV1x4805SC
MEV1x4809SC
MEV1x4812SC
MEV1x4815SC
Start-up time
μs
3045
4445
440
4355
1855
2930
580
1320
2075
3235
Typical Start-Up Wave Form
Ripple & Noise Characterisation Method
Ripple and noise measurements are performed with the following test configuration.
C1
1μF X7R multilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter
10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less
C2
than 100mΩ at 100 kHz
C3
100nF multilayer ceramic capacitor, general purpose
R1
450Ω resistor, carbon film, ±1% tolerance
R2
50Ω BNC termination
T1
3T of the coax cable through a ferrite toroid
RLOAD
Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires
Measured values are multiplied by 10 to obtain the specified values.
Differential Mode Noise Test Schematic
DC/DC Converter
OSCILLOSCOPE
C1 C2 C3
+
SUPPLY
Input
-
+
R1
T1
R2
Y INPUT
Output
-
R LOAD
www.murata-ps.com/support
KDC_MEV1.F05 Page 5 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
APPLICATION NOTES (continued)
Output Ripple Reduction
By using the values of inductance and capacitance stated, the output ripple at the rated load is lowered to 5mV p-p max.
Component selection
Capacitor: It is required that the ESR (Equivalent Series Resistance) should be as low as possible, ceramic types are recommended.
The voltage rating should be at least twice (except for 15V output), the rated output voltage of the DC/DC converter.
Inductor: The rated current of the inductor should not be less than that of the output of the DC/DC converter. At the rated current, the DC resistance of the inductor
should be such that the voltage drop across the inductor is <2% of the rated voltage of the DC/DC converter. The SRF (Self Resonant Frequency) should be
>20MHz.
L
DC
Power
Source
MEV1x0505xC
MEV1x0509xC
MEV1x0512xC
MEV1x0515xC
MEV1x1205xC
MEV1x1209xC
MEV1x1212xC
MEV1x1215xC
MEV1x1505xC
MEV1x1509xC
MEV1x1512xC
MEV1x1515xC
MEV1x2405xC
MEV1x2409xC
MEV1x2412xC
MEV1x2415xC
MEV1x4805SC
MEV1x4809SC
MEV1x4812SC
MEV1x4815SC
L, μH
10
22
47
47
10
22
47
47
10
22
47
47
10
22
47
47
10
22
47
47
Inductor
SMD
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
82103C
82223C
82473C
82473C
C
Load
DC
Through Hole
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
11R103C
11R223C
11R473C
11R473C
Capacitor
C, μF
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
4.7
2.2
1
1
www.murata-ps.com/support
KDC_MEV1.F05 Page 6 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
EFFICIENCY VS LOAD
MEV1x05xxSC
MEV1x12xxSC
90
90
80
80
15V
12V
9V
5V
60
50
70
Efficiency (%)
Efficiency (%)
70
40
40
30
20
20
10
10
0
10
20
30
40
50
60
Load (%)
70
80
90
0
100
MEV1x15xxSC
10
20
30
40
50
60
Load (%)
70
80
90
100
70
80
90
100
90
80
80
15V
12V
9V
5V
60
50
70
Efficiency (%)
70
40
50
40
30
20
20
10
10
0
0
10
20
30
40
50
60
Load (%)
70
80
90
100
70
80
90
100
15V
12V
9V
5V
60
30
0
0
MEV1x24xxSC
90
Efficiency (%)
50
30
0
15V
12V
9V
5V
60
0
10
20
30
40
50
60
Load (%)
MEV1x48xxSC
90
80
Efficiency (%)
70
15V
12V
9V
5V
60
50
40
30
20
10
0
0
10
20
30
40
50
60
Load (%)
www.murata-ps.com/support
KDC_MEV1.F05 Page 7 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
EFFICIENCY VS LOAD
MEV1x05xxDC
MEV1x12xxDC
90
90
80
80
15V
12V
9V
5V
60
50
70
Efficiency (%)
Efficiency (%)
70
40
40
30
20
20
10
10
0
0
10
20
30
40
50
60
Load (%)
70
80
90
100
10
20
30
40
50
60
70
80
90
100
50
60
Load (%)
70
80
90
100
MEV1x24xxDC
90
90
80
80
70
70
50
Efficiency (%)
15V
12V
9V
5V
60
40
50
40
30
20
20
10
10
0
10
20
30
40
50
60
Load (%)
70
80
90
100
15V
12V
9V
5V
60
30
0
0
Load (%)
MEV1x15xxDC
Efficiency (%)
50
30
0
15V
12V
9V
5V
60
0
0
10
20
30
40
www.murata-ps.com/support
KDC_MEV1.F05 Page 8 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
DIP package
SIP package
0.776 (19.70) Max.
0.242
(6.15)
Max.†
MEV1S0505DC
0.394
(10.00) XYYWW
Max.
0.276
(7.0)
Max.
0.181 (4.60)
0.142 (3.60)
MEV1S0505SC
0.0016
(0.40) Min.
XYYWW
5 6* 7
1 2
0.181 (4.60)
0.142 (3.60)
0.022 (0.55)
0.018 (0.45)
10 9* 8
0.0118 (0.30)
0.0079 (0.20)
0.6 (15.24)
0.6 (15.24)
0.092 (2.33)
0.076 (1.93)
* Pin not fitted on single output variants.
48V input variants 0.301 (7.65)
All dimensions in inches ±0.01 (mm ±0.25mm). All pins on a 0.1 (2.54) pitch and within ±0.01 (0.25) of true position.
†
-VIN
NC
+VOUT
-VOUT
+VIN
7 Pin SIP
Function
1
2
5
7
+VIN
-VIN
-VOUT
+VOUT
Dual output variants
0.118 (0.30)
0.0079 (0.20)
0.049 (1.25)
1
7
8
10
14
Pin
0.020 (0.50)
7
1
14 Pin DIP
Function
0.1 (2.54)
0.099 (2.52)
0.061 (1.54)
0.043
(1.09)
14
Single output variants
Pin
0.4
(10.15)
Max.
0.3
(7.62)
PIN CONNECTIONS
0.774 (19.65) Max.
Weight:
2.6g (DIP)
2.8g (SIP - 48V variants)
2.5g (all other SIP)
14 Pin DIP
Pin
Function
1
7
8
9
10
14
-VIN
NC
+VOUT
OV
-VOUT
+VIN
Pin
1
2
5
6
7
7 Pin SIP
Function
+VIN
-VIN
-VOUT
OV
+VOUT
www.murata-ps.com/support
KDC_MEV1.F05 Page 9 of 10
MEV1 Series
3kVDC Isolated 1W Single & Dual Output DC/DC Converters
PACKAGE SPECIFICATIONS (continued)
RECOMMENDED FOOTPRINT DETAILS
7 Pin SIP Package
14 Pin DIP Package
4 HOLES
6 HOLES
0.045 (1.15)
Ø 0.040 (1.00)
*
(1.15)
Ø 0.045
0.040 (1.00)
0.00394 (0.1)
0.00394 (0.1)
0.1 (2.54)
0.1 (2.54)
*
0.1 (2.54)
0.1 (2.54)
* Hole not required for single output variants.
TUBE OUTLINE DIMENSIONS
14 Pin DIP Tube
7 Pin SIP Tube
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length (14 Pin DIP) : 20.47 (520mm ±2mm).
Tube length (7 Pin SIP) : 20.47 (520mm ±2mm).
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
Tube Quantity : 25
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2015 Murata Power Solutions, Inc.
www.murata-ps.com/support
KDC_MEV1.F05 Page 10 of 10
Similar pages