MIC-3397 6U CompactPCI Intel® Xeon® E3 Quad Core & Pentium® Dual Core Processor Blade Features Preliminary Supports 22nm Intel® Xeon® & Pentium® low voltage processor Intel ® DH8900 chipset supports DM1.0 x 4 Up to 16GB DDR3-1333/1600 ECC memory Optional extension module on 8HP version supports high-end discrete graphics, up to four display output ports Supports up to five GbE ports, six USB2.0 ports, two VGA ports,three COM ports, one PS/2 connector, three 2.5" SATA connector (one SATA HDD is optional with 8GB NAND flash), one Cfast, one PCIe 2.0x4 interface to the Rear Transition Module (RTM) PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.16 R1.0 Compliant RoHS COMPLIANT 2002/95/EC Introduction Advantech’s MIC-3397 series is a 6U CompactPCI single board computer with server class processor of Intel® Quad-Core Xeon® E3-1125C v2(40W)/E3-1105C v2(25W) and low power dissipation processor of Intel® Dual-Core Pentium® B925C(15W) ,with DH8900 chipset supports DMI1.0 x 4 FSB. The processor using Intel® 22nm 64 bit process technology, up to 2.5GHz clock speed, 8MB L3 cache featured with Intel® Hyper-Threading, Virtualization, Trusted Execution Technology, enable the board meet the highest standards for the management and security of high-availability applications. It supports dual channel ECC memory, up to 16GB DDR3 of 1333/1600 MHz with max 8G on board and 8G SO-DIMM memory, three 2.5” Serial ATA interfaces (one on board optional with one 8 GB NAND flash, two to RTM),one Cfast slot, five Gigabit Ethernet ports( two on front panel, two to PCIMG2.16, two to RTM with one optional with front panel), six USB2.0 ports (three on front panel, three to RTM), two VGA ports (one on front panel, one to RTM) on 4HP, three COM ports (one to front panel, two to RTM), one PS/2 port, and one PCIe2.0 x4 interface reserved for user define to rear transition module. MIC-3397, designed in single slot (4HP) and dual slots (8HP) form factor widths features. The 8HP version provides extensive & rich IO support, is featured with a high-performance discrete graphics, using AMD Radeon E6760 GPU, supports 1GB GDDR5 at PCIe x1, x2, x4, x8, and x16 lane widths, 2.5 GT/s and 5.0 GT/s link-data rates, up to four display outputs including one DVI-I, one DVI-D port and two DP 1.1or 1.2 port in a MXM 3.0 type A form factor. MIC-3397 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as stand-alone server blade without CompactPCI bus communication, it meets the harsh environment application, to make board attractive to multiple markets which is ideally suited for datacom, telecom and military applications, its outstanding graphics design will bring more opportunities for image-processing in medical, defense system and many other vertical segments applications. Specifications CPU Processor System Memory Compact PCI Interface Ethernet Max Speed Chipset BIOS Technology Max. Capacity Socket J1 ~ J2 Connectors J3 Connector J5 Connector Bridge Mode PHY Interface I/O Connector Controller Interface I/O Connector Controller Resolution Graphics Controller (on MIC-3314) Resolution Multi-display Mode Storage Channels All product specifications are subject to change without notice Quad-Core Intel® Xeon® Processor E3-1125C v2/E3-1105C v2; Dual-Core Intel® Pentium® Processor B925C Up to 8MB L3 Cache, 2.5 GHz Intel® DH8900 PCH (Cave creek) Redundant AMI 8 MByte SPI flash Dual Channel DDR3 1333/1600 MHz with ECC 8GB on board SO-DIMM x1, up to 8GB 64bit/66MHz PCI local bus PICMG2.16 + RTM RTM Pericom PI7C9X130DNDE System Master/Drone (Stand alone) 4 Marvel l 88E1112-C2-NNC1I000 Gigabit Ethernet PHY SGMII, 10/100/1000 Base TX Ethernet PICMG2.16 x 2 to J3, RTM x2 or RJ45 x1 to front Intel WGI210AT SLJXR Gigabit Ethernet Controller PCIe 1.0x1, 10/100/1000 Base TX Ethernet RJ45 x1 to front SM750GX160000-AC ,265P, 16Mbytes of embedded 32-bit DDR memory Dual display: 1360x768 (Clone & extended mode) Single display:1920x1080 (16bit, clone mode only) AMD Radeon E6760, 128-bit wide, 1 GB, GDDR5, 51.2 GB/s DP: 4096 x 2160; Dual Link DVI-D: 2560 x 1600; Single Link DVI-I: 1920 x 1200 Max up to 4 multidisplays:(Clone mode/extended): Config 1:1xDP+1xDP+1xDVI-D+1xDVI-I Config 2: 1xDP+1xDP+1xDVI-D+1xVGA SATA-II 1 channel to on board SATA carrier or on board NAND flash 1 channel to on board cfast socket 2 channels to RTM Last updated : 5-Dec-2014 MIC-3397 Specifications (Cont.) USB2.0 COM LAN Front I/O 3 type A 1 RS232/422 on RJ45 2 10/100/1000Mbps on RJ45 1 VGA port on 4HP 2 DP port, 1 DVI-D and 1 DVI-I port on extension board x1 blue/yellow for Hot Swap/HDD, x1 green for Power, and x1 green for Master/Drone mode System reset button 3 ports 2 RS232/422/485 on RJ45 or DB9 PICMG2.16 x2 to J3, RTM x2 (1 mux to front) 2 ports PCIe2.0 x4 1 VGA port PS/2 for KB & Mouse SATA,USB port, USB disk, network (PXE) Local reset & interrupt Programmable 1s ~ 255s NCT6776D Windows7, Windows7 Embedded, Linux 4HP:80W (MIC-3397) 8HP:115W (MIC-3397 + MIC-3314) 6U/1 slot width (4HP): 233.35 x 160 x 20 mm (9.2" x 6.3" x 0.8") 6U/2 slot width (8HP): 233.35 x 160 x 40 mm (9.2" x 6.3" x 1.6") Operating Non-operating 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing 2.0G Grms (Single slot, without on-board 2.5" SATA HDD) 2Grms 1.06 Grms (Dual slot, without on-board 2.5" SATA HDD) 10G (Without on-board 2.5" SATA HDD) 30G (Single slot, without on-board 2.5" SATA HDD) 15000 feet above sea level 40000 feet above sea level FCC Class A, CE, RoHS Designed to meet GR-63-Core and GR-1089-Core PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.16 R1.0, Graphics Hardware Monitor Operating System Front Panel LEDs Buttons USB2.0 COM LAN SATA PCIe Graphics Others Boot Options Output Interval Controller Compatibility Power Requirement TDP (max./typ.) Physical Dimension & Weight To RTM BIOS Watchdog Timer Temperature Humidity Environment Vibration Shock Altitude Conformance NEBS Level 3 Standards Regulatory Compliance Supported CPU Configurations Intel CPU Model Number Intel® Pentium® Processor B925C Intel® Xeon® Processor E3-1105C v2 Intel® Xeon® Processor E3-1125C v2 # Cores 2 4 4 Freq. 2.0GHz 1.8GHz 2.5GHz Cache 4 MB L3 Cache 8 MB L3 Cache 8 MB L3 Cache Memory Types DDR3/3-1333 DDR3/3-1333/1600 DDR3/3-1333/1600 CPU TDP 15W 25W 40W Ordering Information CPU Board MIC-3397A2-M8E MIC-3397C2-M8E MIC-3397B1-M8E MIC-3397C1-M8E Front panel COM (RJ45) 2 1 2 1 2 1 2 1 LAN (1) USB VGA DVI DP 3 3 3 3 1 1 1 1 NA NA 2 2 NA NA 2 2 CPU Pentium B925C Xeon E3-1125C v2 Xeon E3-1105C v2 Xeon E3-1125C v2 On board Features Memory SO-DIMM (Up to 8GB) (Up to 8G)(4) 8 GB NA 8 GB 1 8 GB 1 8 GB 1 SATA HDD Socket 1 1 1 1 Cfast Socket 1 1 1 1 Slot Width 1 1 2 2 Conn. J3/J5 J3/J5 J3/J5 J3/J5 Note: 1. LAN2 on front is switchable with RIO LAN1 which can be set in BIOS 2. COM support RS232/422 mode only 3. Total memory capacity is up to 16GB, 8GB on board, 8GB on SO-DIMM 4. Pentium B925C SKU w/o SO-DIMM socket Recommended Configurations CPU board Extension Module MIC-3397x-MxE Series MIC-3314 MIC-3397 4HP Rear I/O Board RIO-3315-XXX RIO-3317-XXX MIC-3314 MIC-3397 + MIC-3314 One CFast socket & HDD mounting site One SO-DIMM socket DVI-D Two DP VGA DVI-I COM Three USB2.0 Two Gigabit LAN Online Download www.advantech.com/products