Wall LANEW48xxxH Low ripple & noise Datasheet

Rev. C
FEATURES
● Low Ripple & Noise
● 3000VDC I/O Isolation
● External ON/OFF Control
● High Efficiency up to 85%
● RoHS Directive Compliant
● 2:1 Wide Input Voltage Range
● UL94-V0 Case Potting Materials
● Continuous Short Circuit Protection
● SIP Package: 0.86 x 0.36 x 0.44 Inches
● ISO9001 Certified Manufacturing Facilities
● No External Input or Output Capacitor Needed
● UL60950-1, EN60950-1, and IEC60950-1 Licensed
● 1600VDC I/O Isolation Available (See LANEW3 series)
● CE Mark Meets 2006/95/EC, 93/68/EEC and 2004/108/EC
LANEW3 “H” Series
3KVDC I/O Isolation
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
APPLICATIONS
● Telecom/Datacom
● Wireless Networks
● Industry Control Systems
● Measurement Equipment
● Semiconductor Equipment
DESCRIPTION
The LANEW3 “H” Series offers 3 watts of output power from a 0.86 x
0.36 x 0.44 inch package without derating up to 71ºC. The LANEW3 “H”
Series has a 2:1 wide input voltage range of 4.5-9, 9-18, 18-36 and 3675VDC, it features 3000VDC I/O isolation, remote on/off, and shortcircuit protection. All models are ideally suited for telecommunications,
mobile telecom, test equipment, and industrial applications. For
1600VDC I/O isolation see the LANEW3 Series.
SPECIFICATIONS: LANEW3 “H” Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
5V nominal input
4.5 – 9 VDC
12V nominal input
9 – 18 VDC
Input Voltage Range
24V nominal input
18 – 36 VDC
48V nominal input
36 – 75 VDC
Input Current
See Table
Input Filter
Capacitor Type
5V nominal input
15 VDC
12V nominal input
36 VDC
Input Surge Voltage (100ms max)
24V nominal input
50 VDC
48V nominal input
100 VDC
5V nominal input
400mAp-p
12V nominal input
150mAp-p
Input Reflected Ripple Current
24V nominal input
380mAp-p
48V nominal input
170mAp-p
Start Up Time
Power Up
30ms typ
(Nominal Vin and constant resistive Load)
Remote ON/OFF
30ms typ
Open or high impedance
DC-DC ON
Control pin applied current
DC-DC OFF
2 ~ 4mA max (via 1KΩ)
Remote OFF Input Current (nominal input)
2.5mA max
Application Circuit
Remote ON/OFF
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Cross Regulation (Dual)
Minimum Load
Output Power
Ripple & Noise (See Note 4)
Transient Response Recovery Time
PROTECTION
Short Circuit Protection
Full load and nominal Vin
Low line to high line at full load
Single Output (no load to full load)
5% load to 100% load
Dual Output (no load to full load)
Asymmetrical load 25% / 100% FL
20MHz bandwidth
25% load step change
See Table
±1%
±0.2%
±1%
±0.5%
±1%
±5%
0%
3 Watts max.
50mVp-p
500μs typ.
Continuous, automatic recovery
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW3 “H” Series
3KVDC I/O Isolation
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
Rev. C
SPECIFICATIONS (CONTINUED)
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage (input to output)
Isolation Resistance
Isolation Capacitance
ENVIRONMENTAL SPECIFICATIONS
See Table
100KHz, min.
3000VDC, min
10GΩ min.
30pF max.
Full load to minimum load
-40°C ~ +71°C (without derating)
+71°C ~+100°C (with derating)
-55°C to +105°C
5% to 95% RH
MIL-STD-810F
MIL-STD-810F
±0.02% / °C max.
4,386,000 Hours
2,401,000 Hours
Operating Temperature
Storage Temperature
Relative Humidity
Thermal Shock
Vibration
Temperature Coefficient
MTBF (see Note 1)
Bellcore TR-NWT-000332
MIL-HDBK-217F
PHYSICAL SPECIFICATIONS
Weight
4.8 grams (0.17oz)
0.86(L) x 0.36(W) x 0.44(H) inches
21.8(L) x 9.1(W) x 11.1(H) mm
Non-conductive black plastic
None
Silicon (UL94-V0)
Dimensions
Case Material
Base Material
Potting Material
SAFETY & EMC
Safety Standards and Approvals
EMI (See Note 6)
EN55022
ESD
EN61000-4-2
Radiated Immunity
Fast Transient (See Note 7)
Surge (See Note 7)
Conducted Immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
IEC60950-1, UL60950-1, EN60950-1
Class A
Air ± 8KV
Contact ± 6KV
10V/m
± 2KV
± 1KV
10Vr.m.s.
DERATING CURVES
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
LANEW3 “H” Series
3KVDC I/O Isolation
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
Rev. C
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Number
LANEW533R3H
LANEW505R3H
LANEW509R3H
LANEW512R3H
LANEW515R3H
LANEW505RD3H
LANEW512RD3H
LANEW515RD3H
LANEW1233R3H
LANEW1205R3H
LANEW1209R3H
LANEW1212R3H
LANEW1215R3H
LANEW1205RD3H
LANEW1212RD3H
LANEW1215RD3H
LANEW2433R3H
LANEW2405R3H
LANEW2409R3H
LANEW2412R3H
LANEW2415R3H
LANEW2405RD3H
LANEW2412RD3H
LANEW2415RD3H
LANEW4833R3H
LANEW4805R3H
LANEW4809R3H
LANEW4812R3H
LANEW4815R3H
LANEW4805RD3H
LANEW4812RD3H
LANEW4815RD3H
Input Range
5 VDC
(4.5 – 9 VDC)
12 VDC
(9 – 18 VDC)
24 VDC
(18 – 36 VDC)
48 VDC
(36 – 75 VDC)
Output
Voltage
Output
Current
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
9 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
700mA
600mA
333mA
250mA
200mA
±300mA
±125mA
±100mA
700mA
600mA
333mA
250mA
200mA
±300mA
±125mA
±100mA
700mA
600mA
333mA
250mA
200mA
±300mA
±125mA
±100mA
700mA
600mA
333mA
250mA
200mA
±300mA
±125mA
±100mA
Input Current
No load (3)
Full load (2)
113mA
670mA
75mA
822mA
83mA
811mA
83mA
800mA
53mA
790mA
45mA
822mA
135mA
800mA
120mA
790mA
45mA
275mA
45mA
338mA
45mA
333mA
45mA
329mA
53mA
325mA
75mA
329mA
60mA
325mA
60mA
325mA
23mA
138mA
10mA
169mA
23mA
167mA
26mA
164mA
20mA
162mA
20mA
164mA
24mA
162mA
24mA
162mA
11mA
69mA
12mA
84mA
8mA
83mA
8mA
82mA
18mA
81mA
12mA
82mA
12mA
81mA
15mA
81mA
Efficiency (4)
Capacitor (5)
Load max
73%
77%
78%
79%
80%
77%
79%
80%
74%
78%
79%
80%
81%
80%
81%
81%
74%
78%
79%
80%
81%
80%
81%
81%
74%
78%
79%
80%
81%
80%
81%
81%
1760uF
1000uF
470uF
170uF
110uF
±470uF
±100uF
±47uF
1760uF
1000uF
470uF
170uF
110uF
±470uF
±100uF
±47uF
1760uF
1000uF
470uF
170uF
110uF
±470uF
±100uF
±47uF
1760uF
1000uF
470uF
170uF
110uF
±470uF
±100uF
±47uF
NOTES
1. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC.
MIL-HDBK-217F Notice2 @ Ta = 25°C, Full Load (Ground fixed and controlled environment).
2. Maximum value at nominal input voltage and full load.
3. Typical value at nominal input voltage and no load.
4. Typical value at nominal input voltage and full load.
5. Test by minimum Vin and constant resistive load.
6. The LANEW3 “H” series meets EN55022 Class A with an external L-C filter before the input pins on the converter.
(Connect networks according to the Class B figure)
Recommended: 05Vin: C1 = 2.2μF/10V 001206MLCC L1 = 3.3μF 0504 SMD Inductor P/N: PMT-044
12Vin: C1 = 0.68μF/25V 01206MLCC L1 = 10μF 0504 -SMD Inductor P/N: PMT-047
24Vin: C1 = 4.7μF/50V 001210MLCC L1 = 10μF 0504 -SMD Inductor P/N: PMT-047
48Vin: C1 = 0.47μF/100V 1812MLCC L1 = 56μF 0504 -SMD Inductor P/N: PMT-045
7. The external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor
suggested is Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ.
8. For 1600VDC input/output isolation see the LANEW3 Series.
*Due to advances in technology, specifications are subject to change without notice.
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
LANEW3 “H” Series
3KVDC I/O Isolation
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
Rev. C
MECHANICAL DRAWING
Unit: inches (mm)
Pin Connection (3000VDC Isolation Models)
Pin
1
2
3
5
6
7
8
Single Output
-INPUT
+INPUT
CTRL
NO PIN
+OUTPUT
-OUTPUT
NC
Dual Output
-INPUT
+INPUT
CTRL
NO PIN
+OUTPUT
COMMON
-OUTPUT
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
Pin pitch tolerance: ±0.01 (0.25)
Pin dimension tolerance: ±0.004 (0.1)
Recommended Filter for EN55022 Class B Compliance
Recommended EN55022 Class B Filter Circuit Layout
The components used in the figure above are as follows
LANEW5xxxH
LANEW12xxxH
LANEW24xxxH
LANEW48xxxH
C1
10μF/10V
1206 MLCC
2.2μF/25V
1206 MLCC
6.8μF/50V
1812 MLCC
2.2μF/100V
1812 MLCC
L1
3.3μH 0504 SMD Inductor
PMT-044
18μH 0504 SMD Inductor
PMT-046
18μH 0504 SMD Inductor
PMT-046
56μH 0504 SMD Inductor
PMT-045
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Similar pages