TI 74AUP1G240DCKTG4

SN74AUP1G240
www.ti.com
SCES627C – MARCH 2005 – REVISED MAY 2010
LOW-POWER SINGLE BUFFER/DRIVER WITH 3-STATE OUTPUT
Check for Samples: SN74AUP1G240
FEATURES
1
•
•
•
•
•
•
•
Available in the Texas Instruments NanoStar™
Package
Low Static-Power Consumption
– ICC = 0.9 mA Max
Low Dynamic-Power Consumption
– Cpd = 4.2 pF at 3.3 V Typ
Low Input Capacitance
– CI = 1.5 pF Typ
Low Noise – Overshoot and Undershoot
<10% of VCC
Input-Disable Feature Allows Floating Input
Conditions
Ioff Supports Partial Power-Down-Mode
Operation
•
•
•
•
•
•
•
•
Input Hysteresis Allows Slow Input Transition
and Better Switching Noise Immunity at the
Input
Wide Operating VCC Range of 0.8 V to 3.6 V
Optimized for 3.3-V Operation
3.6-V I/O Tolerant to Support Mixed-Mode
Signal Operation
tpd = 4.7 ns Max at 3.3 V
Suitable for Point-to-Point Applications
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
DBV PACKAGE
(TOP VIEW)
OE
1
A
2
GND
3
1
6
VCC
DSF PACKAGE
(TOP VIEW)
A
2
5
NC
GND
3
4
Y
1
1
A
2
GND
3
5
VCC
4
Y
Y
4
OE
OE
VCC
5
DRY PACKAGE
(TOP VIEW)
OE
DCK PACKAGE
(TOP VIEW)
6
VCC
A
2
5
N.C.
GND
3
4
Y
YFP PACKAGE
(TOP VIEW)
OE
A
GND
A1
1
6 A2
B1
2
5 B2
C1
3
4 C2
VCC
N.C.
Y
YZP PACKAGE
(TOP VIEW)
OE
A
GND
A1
1
B1
2
C1
3
5 A2
VCC
4 C2
Y
See mechanical drawings for dimensions.
N.C. – No internal connection
DESCRIPTION/ORDERING INFORMATION
The AUP family is TI's premier solution to the industry's low power needs in battery-powered portable
applications. This family ensures a very low static and dynamic power consumption across the entire VCC range
of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see
Figure 1 and Figure 2).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2010, Texas Instruments Incorporated
SN74AUP1G240
SCES627C – MARCH 2005 – REVISED MAY 2010
Static-Power Consumption
(mA)
www.ti.com
Switching Characteristics
Dynamic-Power Consumption
(pF)
100%
100%
80%
80%
at 25 MHz
†
3.5
60%
60%
3.3-V
†
Logic
40%
40%
Voltage - V
3
3.3-V
LVC †
Logic
2.5
Input
2
1.5
1
Output
0.5
20%
20%
AUP
0%
†
0
-0.5
AUP
0%
0
†
Single, dual, and triple gates.
Figure 1. AUP – The Lowest-Power Family
5
10
15
20 25
Time - ns
30
35
40
45
AUP1G08 data at CL = 15 pF.
Figure 2. Excellent Signal Integrity
This buffer/driver is a single line driver with a 3-state output. The output is disabled when the output-enable (OE)
input is high. This device has the input-disable feature, which allows floating input signals.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION (1)
–40°C to 85°C
(1)
(2)
(3)
ORDERABLE PART
NUMBER
PACKAGE (2)
TA
TOP-SIDE
MARKING (3)
NanoStar – WCSP (DSBGA)
0.23-mm large bump – YFP
Reel of 3000
SN74AUP1G240YFPR
_ _ _HK_
NanoStar – WCSP (DSBGA)
0.23-mm large bump – YZP (Pb-free)
Reel of 3000
SN74AUP1G240YZPR
_ _ _HK_
QFN – DRY
Reel of 5000
SN74AUP1G240DRYR
HK
uQFN – DSF
Reel of 5000
SN74AUP1G240DSFR
HK
SOT (SOT-23) – DBV
Reel of 3000
SN74AUP1G240DBVR
H40_
SOT (SC-70) – DCK
Reel of 3000
SN74AUP1G240DCKR
HK_
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
DBV/DCK: The actual top-side marking has one additional character that designates the wafer fab/assembly site.
YFP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the wafer fab/assembly site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
FUNCTION TABLE
INPUTS
(1)
OUTPUT
Y
OE
A
L
H
L
L
L
H
H
X (1)
Z
Floating inputs allowed.
LOGIC DIAGRAM (POSITIVE LOGIC)
1
OE
2
4
A
2
Y
Submit Documentation Feedback
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
SN74AUP1G240
www.ti.com
SCES627C – MARCH 2005 – REVISED MAY 2010
ABSOLUTE MAXIMUM RATINGS (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
VCC
Supply voltage range
–0.5
4.6
V
VI
Input voltage range (2)
–0.5
4.6
V
VO
Voltage range applied to any output in the high-impedance or power-off state (2)
–0.5
4.6
V
–0.5
VCC + 0.5
(2)
UNIT
VO
Output voltage range in the high or low state
IIK
Input clamp current
VI < 0
–50
mA
IOK
Output clamp current
VO < 0
–50
mA
IO
Continuous output current
±20
mA
Continuous current through VCC or GND
±50
mA
Package thermal impedance (3)
qJA
Tstg
(1)
(2)
(3)
DBV package
206
DCK package
252
DSF package
300
DRY package
234
YFP/YZP package
132
Storage temperature range
–65
V
°C/W
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS (1)
VCC
Supply voltage
VCC = 0.8 V
VIH
High-level input voltage
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
MIN
MAX
0.8
3.6
VCC
3.6
0.65 × VCC
3.6
1.6
3.6
2
3.6
VCC = 0.8 V
VIL
Low-level input voltage
VO
Output voltage
Δt/Δv
Input transition rise or fall rate
TA
Operating free-air temperature
(1)
UNIT
V
V
0
VCC = 1.1 V to 1.95 V
0 0.35 × VCC
VCC = 2.3 V to 2.7 V
0
VCC = 3 V to 3.6 V
0
0.9
Active state
0
VCC
3-state
0
3.6
VCC = 0.8 V to 3.6 V
–40
0.7
V
V
200
ns/V
85
°C
The A data input pins may be floated if the OE is high and the outputs are disabled; otherwise, all unused inputs of the device must be
held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs,
literature number SCBA004.
Submit Documentation Feedback
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
3
SN74AUP1G240
SCES627C – MARCH 2005 – REVISED MAY 2010
www.ti.com
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
VOH
TEST CONDITIONS
VCC
MIN
0.8 V to 3.6 V
VCC – 0.1
VCC – 0.1
1.1 V
0.75 × VCC
0.7 × VCC
IOH = –1.7 mA
1.4 V
1.11
1.03
IOH = –1.9 mA
1.65 V
1.32
1.3
2.05
1.97
2.3 V
IOH = –2.7 mA
3V
IOH = –4 mA
1.9
1.85
2.72
2.67
2.6
2.55
MAX
UNIT
V
IOL = 20 mA
0.8 V to 3.6 V
0.1
0.1
IOL = 1.1 mA
1.1 V
0.3 × VCC
0.3 × VCC
IOL = 1.7 mA
1.4 V
0.31
0.37
IOL = 1.9 mA
1.65 V
0.31
0.35
0.31
0.33
0.44
0.45
0.31
0.33
0.44
0.45
0 V to 3.6 V
0.1
0.5
mA
IOL = 2.3 mA
2.3 V
IOL = 3.1 mA
IOL = 2.7 mA
3V
IOL = 4 mA
II
TA = –40°C to 85°C
MAX
IOH = –1.1 mA
IOH = –3.1 mA
A or OE
input
TYP
IOH = –20 mA
IOH = –2.3 mA
VOL
TA = 25°C
MIN
VI = GND to 3.6 V
V
Ioff
VI or VO = 0 V to 3.6 V
0V
0.2
0.6
mA
ΔIoff
VI or VO = 0 V to 3.6 V
0 V to 0.2 V
0.2
0.6
mA
IOZ
VO = VCC or GND
3.6 V
0.1
0.5
mA
ICC
VI = GND or (VCC to 3.6 V),
OE = GND, IO = 0
0.8 V to 3.6 V
0.5
0.9
mA
A input
ΔICC
OE input
VI = VCC – 0.6 V, (1)
IO = 0
All inputs VI = GND to 3.6 V, OE = VCC
CI
VI = VCC or GND
Co
VO = VCC or GND
(1)
(2)
4
3.3 V
(2)
0.8 V to 3.6 V
0V
1.5
3.6 V
1.5
3.6 V
3
40
50
110
120
0
0
mA
pF
pF
One input at VCC – 0.6 V, other input at VCC or GND
To show ICC is very low when OE is high and the inputs and outputs are disabled
Submit Documentation Feedback
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
SN74AUP1G240
www.ti.com
SCES627C – MARCH 2005 – REVISED MAY 2010
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
tpd
A
Y
OE
Y
Y
MIN
MAX
4.4
7.5
10.3
3.5
15.5
1.5 V ± 0.1 V
3.3
5.4
6.9
2.3
10.3
1.8 V ± 0.15 V
2.6
4.4
5.8
1.8
8.3
2.5 V ± 0.2 V
1.9
3.3
4.3
1.3
5.8
3.3 V ± 0.3 V
1.6
2.7
3.6
1
4.7
ns
16.5
1.2 V ± 0.1 V
4.5
8.1
13.4
3
18.6
1.5 V ± 0.1 V
3.8
5.7
8.4
2.8
12.2
1.8 V ± 0.15 V
3.1
4.5
6.3
2.3
9.7
2.5 V ± 0.2 V
2.4
3.2
4.1
1.8
6.6
3.3 V ± 0.3 V
2.1
2.7
3.3
1.5
5.6
1.2 V ± 0.1 V
OE
UNIT
MAX
1.2 V ± 0.1 V
0.8 V
tdis
TYP
17.1
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
9
2.6
2.6
4.7
2.2
8.4
1.5 V ± 0.1 V
2
2.8
3.2
1.7
5.9
1.8 V ± 0.15 V
1.8
2.5
3.1
1.6
5.5
2.5 V ± 0.2 V
1.3
1.9
2.1
1.1
4
3.3 V ± 0.3 V
1.6
2.4
2.9
1.4
4.1
ns
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 10 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
tpd
A
Y
OE
Y
OE
Y
MAX
MIN
MAX
1.2 V ± 0.1 V
5.4
8.6
11.5
4.4
17.3
1.5 V ± 0.1 V
4
6.2
7.7
3
11.3
1.8 V ± 0.15 V
3.3
5.1
6.5
2.4
9.1
2.5 V ± 0.2 V
2.5
3.8
4.9
1.8
6.3
3.3 V ± 0.3 V
2
3.2
4.1
1.5
5.2
1.2 V ± 0.1 V
5.1
8.9
14.4
3.7
20.9
1.5 V ± 0.1 V
4.3
6.3
9.1
3.3
13.7
1.8 V ± 0.15 V
3.6
5
6.8
2.8
10.9
2.5 V ± 0.2 V
2.8
3.7
4.6
2.2
7.7
3.3 V ± 0.3 V
2.5
3.1
3.7
1.9
6.3
12.9
4.1
5.3
6.6
3.9
1.5 V ± 0.1 V
2.4
3.7
4.6
2.1
9.6
1.8 V ± 0.15 V
2.7
3.6
3.9
2.4
10.1
2.5 V ± 0.2 V
1.7
2.5
2.8
1.5
7.3
3.3 V ± 0.3 V
2.5
3.2
3.8
2.2
9.1
Submit Documentation Feedback
Product Folder Link(s): SN74AUP1G240
ns
ns
9.7
1.2 V ± 0.1 V
Copyright © 2005–2010, Texas Instruments Incorporated
UNIT
18.7
0.8 V
tdis
TYP
19.5
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
5
SN74AUP1G240
SCES627C – MARCH 2005 – REVISED MAY 2010
www.ti.com
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
tpd
A
Y
OE
Y
OE
Y
UNIT
MAX
MIN
MAX
1.2 V ± 0.1 V
6.4
9.7
12.9
5.4
19.8
1.5 V ± 0.1 V
4.8
7.1
8.7
3.8
13.3
1.8 V ± 0.15 V
3.9
5.8
7.2
3.1
10.8
2.5 V ± 0.2 V
2.9
4.4
5.4
2.3
7.6
3.3 V ± 0.3 V
2.4
3.6
4.5
1.9
6.1
10.1
15.8
4.6
22.9
ns
23.3
1.2 V ± 0.1 V
6
1.5 V ± 0.1 V
4.9
7
9.9
3.9
15
1.8 V ± 0.15 V
4
5.5
7.5
3.3
12.1
2.5 V ± 0.2 V
3.2
4
4.9
2.6
8.6
3.3 V ± 0.3 V
2.8
3.4
4
2.2
7
5.3
5.8
3
14
0.8 V
tdis
TYP
22.4
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
11.1
1.2 V ± 0.1 V
4.1
1.5 V ± 0.1 V
2.7
4
5.5
2.4
10.1
1.8 V ± 0.15 V
3.1
4.5
5.4
2.9
10.9
2.5 V ± 0.2 V
2.4
3
3.2
1.6
7.9
3.3 V ± 0.3 V
3.3
4.7
5.4
3
10
ns
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
tpd
A
Y
OE
Y
6
OE
Y
MAX
MIN
MAX
1.2 V ± 0.1 V
8.9
12.6
16.1
7.3
25.7
1.5 V ± 0.1 V
6.8
9.2
11
5.5
17.1
1.8 V ± 0.15 V
5.5
7.6
9.2
4.5
13.8
2.5 V ± 0.2 V
4.2
5.7
6.8
3.5
9.7
3.3 V ± 0.3 V
3.5
4.7
5.7
2.3
7.8
27.4
1.2 V ± 0.1 V
8.2
12.6
18.5
6.8
1.5 V ± 0.1 V
6.6
8.8
11.8
5.6
18
1.8 V ± 0.15 V
5.5
7.1
9.1
4.7
14.2
2.5 V ± 0.2 V
4.4
5.3
6.2
3.8
10.2
3.3 V ± 0.3 V
3.9
4.5
5.1
3.1
8.2
ns
ns
14
1.2 V ± 0.1 V
5
6.2
7.4
4.8
14.8
1.5 V ± 0.1 V
4.2
5.7
7.7
3.9
10.8
1.8 V ± 0.15 V
5.1
7.2
9
4.9
11.7
2.5 V ± 0.2 V
4.3
5.3
5.9
4.1
9.1
3.3 V ± 0.3 V
7.4
8.3
9.4
4.3
11.6
Submit Documentation Feedback
UNIT
30.9
0.8 V
tdis
TYP
29
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
SN74AUP1G240
www.ti.com
SCES627C – MARCH 2005 – REVISED MAY 2010
OPERATING CHARACTERISTICS
TA = 25°C
PARAMETER
TEST CONDITIONS
VCC
0.8 V
Outputs enabled
Cpd
Power dissipation capacitance
f = 10 MHz
Outputs disabled
TYP
1.2 V ± 0.1 V
3.9
1.5 V ± 0.1 V
3.9
1.8 V ± 0.15 V
3.9
2.5 V ± 0.2 V
4
3.3 V ± 0.3 V
4.2
0.8 V
0
1.2 V ± 0.1 V
0
1.5 V ± 0.1 V
0
1.8 V ± 0.15 V
0
2.5 V ± 0.2 V
0
3.3 V ± 0.3 V
0
Submit Documentation Feedback
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
UNIT
4
pF
7
SN74AUP1G240
SCES627C – MARCH 2005 – REVISED MAY 2010
www.ti.com
PARAMETER MEASUREMENT INFORMATION
(Propagation Delays, Setup and Hold Times, and Pulse Width)
From Output
Under Test
CL
(see Note A)
1 MW
LOAD CIRCUIT
CL
VM
VI
VCC = 0.8 V
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
tw
VCC
Input
VCC/2
VCC/2
VI
VM
Input
0V
VM
VOLTAGE WAVEFORMS
PULSE DURATION
0V
tPHL
tPLH
VOH
VM
Output
VM
VOL
tPHL
VCC
Timing Input
0V
tPLH
tsu
VOH
VM
Output
th
VCC
VM
VOL
Data Input
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
NOTES: A.
B.
C.
D.
E.
VCC/2
VCC/2
VCC/2
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W, tr/tf = 3 ns.
The outputs are measured one at a time, with one transition per measurement.
tPLH and tPHL are the same as tpd.
All parameters and waveforms are not applicable to all devices.
Figure 3. Load Circuit and Voltage Waveforms
8
Submit Documentation Feedback
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
SN74AUP1G240
www.ti.com
SCES627C – MARCH 2005 – REVISED MAY 2010
PARAMETER MEASUREMENT INFORMATION
(Enable and Disable Times)
2 ´ VCC
S1
5 kW
From Output
Under Test
GND
CL
(see Note A)
5 kW
TEST
S1
tPLZ/tPZL
tPHZ/tPZH
2 ´ VCC
GND
LOAD CIRCUIT
CL
VM
VI
VD
VCC = 0.8 V
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.15 V
5, 10, 15, 30 pF
VCC/2
VCC
0.15 V
5, 10, 15, 30 pF
VCC/2
VCC
0.3 V
VCC
Output
Control
Output
Waveform 1
S1 at 2 ´ VCC
(see Note B)
VCC/2
0V
tPZL
tPLZ
VCC
VCC/2
tPZH
Output
Waveform 2
S1 at GND
(see Note B)
VCC/2
VOL + VD
VOL
tPHZ
VCC/2
VOH - VD
VOH
»0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W, tr/tf = 3 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. All parameters and waveforms are not applicable to all devices.
Figure 4. Load Circuit and Voltage Waveforms
Submit Documentation Feedback
Copyright © 2005–2010, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP1G240
9
PACKAGE OPTION ADDENDUM
www.ti.com
16-Apr-2010
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
74AUP1G240DBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DBVRG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKTE4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKTG4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DCKT
ACTIVE
SC70
DCK
5
250
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DRYR
ACTIVE
SON
DRY
6
5000 Green (RoHS &
no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DSFR
ACTIVE
SON
DSF
6
5000 Green (RoHS &
no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240YFPR
ACTIVE
DSBGA
YFP
6
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
SN74AUP1G240YZPR
ACTIVE
DSBGA
YZP
5
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
16-Apr-2010
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
SN74AUP1G240DBVR
SOT-23
3000
180.0
9.2
DBV
5
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3.23
3.17
1.37
4.0
8.0
Q3
SN74AUP1G240DBVT
SOT-23
DBV
5
250
180.0
9.2
3.23
3.17
1.37
4.0
8.0
Q3
SN74AUP1G240DCKR
SC70
DCK
5
3000
180.0
9.2
2.24
2.34
1.22
4.0
8.0
Q3
SN74AUP1G240DCKT
SC70
DCK
5
250
180.0
9.2
2.24
2.34
1.22
4.0
8.0
Q3
SN74AUP1G240DRYR
SON
DRY
6
5000
180.0
8.4
1.25
1.6
0.7
4.0
8.0
Q1
SN74AUP1G240DSFR
SON
DSF
6
5000
180.0
8.4
1.16
1.16
0.63
4.0
8.0
Q2
SN74AUP1G240YFPR
DSBGA
YFP
6
3000
178.0
9.2
0.89
1.29
0.62
4.0
8.0
Q1
SN74AUP1G240YZPR
DSBGA
YZP
5
3000
180.0
8.4
1.02
1.52
0.63
4.0
8.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN74AUP1G240DBVR
SOT-23
DBV
5
3000
202.0
201.0
28.0
SN74AUP1G240DBVT
SOT-23
DBV
5
250
202.0
201.0
28.0
SN74AUP1G240DCKR
SC70
DCK
5
3000
202.0
201.0
28.0
SN74AUP1G240DCKT
SC70
DCK
5
250
202.0
201.0
28.0
SN74AUP1G240DRYR
SON
DRY
6
5000
202.0
201.0
28.0
SN74AUP1G240DSFR
SON
DSF
6
5000
202.0
201.0
28.0
SN74AUP1G240YFPR
DSBGA
YFP
6
3000
220.0
220.0
35.0
SN74AUP1G240YZPR
DSBGA
YZP
5
3000
220.0
220.0
34.0
Pack Materials-Page 2
X: Max = 1430 µm, Min = 1370 µm
Y: Max = 930 µm, Min = 870 µm
X: Max = 1430 µm, Min = 1370 µm
Y: Max = 930 µm, Min = 870 µm
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated