STMICROELECTRONICS 74VHC04TTR

74VHC04
HEX INVERTER
■
■
■
■
■
■
■
■
■
■
HIGH SPEED: tPD = 3.8ns (TYP.) at VCC = 5V
LOW POWER DISSIPATION:
ICC = 2 µA (MAX.) at TA=25°C
HIGH NOISE IMMUNITY:
VNIH = VNIL = 28% VCC (MIN.)
POWER DOWN PROTECTION ON INPUTS
SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 8 mA (MIN)
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
OPERATING VOLTAGE RANGE:
VCC(OPR) = 2V to 5.5V
PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 04
IMPROVED LATCH-UP IMMUNITY
LOW NOISE: VOLP = 0.8V (MAX.)
DESCRIPTION
The 74VHC04 is an advanced high-speed CMOS
HEX INVERTER fabricated with sub-micron
silicon gate and double-layer metal wiring C2MOS
technology.
The internal circuit is composed of 3 stages
including buffer output, which provides high noise
immunity and stable output.
SOP
TSSOP
Table 1: Order Codes
PACKAGE
T&R
SOP
TSSOP
74VHC04MTR
74VHC04TTR
Power down protection is provided on all inputs
and 0 to 7V can be accepted on inputs with no
regard to the supply voltage. This device can be
used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
Figure 1: Pin Connection And IEC Logic Symbols
November 2004
Rev. 5
1/11
74VHC04
Figure 2: Input Equivalent Circuit
Table 2: Pin Description
PIN N°
SYMBOL
1, 3, 5, 9, 11,
13
2, 4, 6, 8, 10,
12
7
14
NAME AND FUNCTION
1A to 6A
Data Inputs
1Y to 6Y
Data Outputs
GND
VCC
Ground (0V)
Positive Supply Voltage
Table 3: Truth Table
A
Y
L
H
H
L
Table 4: Absolute Maximum Ratings
Symbol
VCC
Parameter
Value
Unit
Supply Voltage
-0.5 to +7.0
V
VI
DC Input Voltage
-0.5 to +7.0
V
VO
DC Output Voltage
-0.5 to VCC + 0.5
V
IIK
DC Input Diode Current
- 20
mA
IOK
DC Output Diode Current
± 20
mA
IO
DC Output Current
± 25
mA
± 75
mA
-65 to +150
°C
300
°C
ICC or IGND DC VCC or Ground Current
Tstg
Storage Temperature
TL
Lead Temperature (10 sec)
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied
Table 5: Recommended Operating Conditions
Symbol
VCC
Parameter
Supply Voltage
Unit
2 to 5.5
V
VI
Input Voltage
0 to 5.5
V
VO
Output Voltage
0 to VCC
V
Top
Operating Temperature
-55 to 125
°C
0 to 100
0 to 20
ns/V
dt/dv
Input Rise and Fall Time (note 1) (VCC = 3.3 ± 0.3V)
(VCC = 5.0 ± 0.5V)
1) VIN from 30% to 70% of VCC
2/11
Value
74VHC04
Table 6: DC Specifications
Test Condition
Symbol
VIH
VIL
VOH
VOL
II
ICC
Parameter
High Level Input
Voltage
Low Level Input
Voltage
High Level Output
Voltage
Low Level Output
Voltage
Input Leakage
Current
Quiescent Supply
Current
Value
TA = 25°C
VCC
(V)
Min.
2.0
3.0 to
5.5
2.0
3.0 to
5.5
Typ.
Max.
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
1.5
1.5
1.5
0.7VCC
0.7VCC
0.7VCC
Max.
V
0.5
0.5
0.5
0.3VCC
0.3VCC
0.3VCC
2.0
IO=-50 µA
1.9
2.0
1.9
1.9
3.0
IO=-50 µA
2.9
3.0
2.9
2.9
4.5
IO=-50 µA
4.4
4.5
3.0
IO=-4 mA
2.58
3.94
4.4
4.4
2.48
2.4
Unit
V
V
4.5
IO=-8 mA
2.0
IO=50 µA
0.0
0.1
0.1
0.1
3.0
IO=50 µA
0.0
0.1
0.1
0.1
4.5
IO=50 µA
0.0
0.1
0.1
0.1
3.0
IO=4 mA
0.36
0.44
0.55
4.5
IO=8 mA
0.36
0.44
0.55
0 to
5.5
VI = 5.5V or GND
± 0.1
±1
±1
µA
5.5
VI = VCC or GND
2
20
20
µA
3.8
3.7
V
Table 7: AC Electrical Characteristics (Input tr = tf = 3ns)
Test Condition
Symbol
tPLH
tPHL
Parameter
Propagation Delay
Time
VCC
(V)
CL
(pF)
3.3(*)
3.3(*)
(**)
5.0(**)
5.0
Value
TA = 25°C
Min.
-40 to 85°C
-55 to 125°C
Typ.
Max.
Min.
Max.
Min.
Max.
15
5.0
8.9
1.0
10.5
1.0
10.5
50
7.9
11.4
1.0
13.0
1.0
13.0
15
3.8
5.5
1.0
6.5
1.0
6.5
50
5.3
7.5
1.0
8.5
1.0
8.5
Unit
ns
(*) Voltage range is 3.3V ± 0.3V
(**) Voltage range is 5.0V ± 0.5V
3/11
74VHC04
Table 8: Capacitive Characteristics
Test Condition
Symbol
Value
TA = 25°C
Parameter
Min.
Typ.
Max.
10
CIN
Input Capacitance
4
CPD
Power Dissipation
Capacitance
(note 1)
15
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
Unit
Max.
10
pF
pF
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/6 (per gate)
Table 9: Dynamic Switching Characteristics
Test Condition
Symbol
VOLP
VOLV
VIHD
VILD
Parameter
Dynamic Low
Voltage Quiet
Output (note 1, 2)
Dynamic High
Voltage Input
(note 1, 3)
Dynamic Low
Voltage Input
(note 1, 3)
TA = 25°C
VCC
(V)
Min.
5.0
5.0
Value
-0.8
CL = 50 pF
5.0
Typ.
Max.
0.3
0.8
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
Unit
Max.
V
-0.3
3.5
V
1.5
V
1) Worst case package.
2) Max number of outputs defined as (n). Data inputs are driven 0V to 5.0V, (n-1) outputs switching and one output at GND.
3) Max number of data inputs (n) switching. (n-1) switching 0V to 5.0V. Inputs under test switching: 5.0V to threshold (VILD), 0V to threshold
(VIHD), f=1MHz.
Figure 3: Test Circuit
CL = 15/50pF or equivalent (includes jig and probe capacitance)
RT = ZOUT of pulse generator (typically 50Ω)
4/11
74VHC04
Figure 4: Waveform - Propagation Delays (f=1MHz; 50% duty cycle)
5/11
74VHC04
SO-14 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
1.35
1.75
0.053
0.069
A1
0.1
0.25
0.004
0.010
A2
1.10
1.65
0.043
0.065
B
0.33
0.51
0.013
0.020
C
0.19
0.25
0.007
0.010
D
8.55
8.75
0.337
0.344
E
3.8
4.0
0.150
0.157
e
1.27
0.050
H
5.8
6.2
0.228
0.244
h
0.25
0.50
0.010
0.020
L
0.4
1.27
0.016
0.050
k
0°
8°
0°
8°
ddd
0.100
0.004
0016019D
6/11
74VHC04
TSSOP14 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
MAX.
1.2
A1
0.05
A2
0.8
b
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
1
e
0.65 BSC
K
0˚
L
0.45
A
0.60
0.0256 BSC
8˚
0˚
0.75
0.018
8˚
0.024
0.030
A2
A1
b
e
K
c
L
E
D
E1
PIN 1 IDENTIFICATION
1
0080337D
7/11
74VHC04
Tape & Reel SO-14 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
MAX.
MIN.
330
13.2
TYP.
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
8/11
TYP
0.504
22.4
0.519
0.882
Ao
6.4
6.6
0.252
0.260
Bo
9
9.2
0.354
0.362
Ko
2.1
2.3
0.082
0.090
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
74VHC04
Tape & Reel TSSOP14 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
TYP
MAX.
MIN.
330
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
TYP.
0.504
22.4
0.519
0.882
Ao
6.7
6.9
0.264
0.272
Bo
5.3
5.5
0.209
0.217
Ko
1.6
1.8
0.063
0.071
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
9/11
74VHC04
Table 10: Revision History
Date
Revision
12-Nov-2004
5
10/11
Description of Changes
Order Codes Revision - pag. 1.
74VHC04
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2004 STMicroelectronics - All Rights Reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
11/11