Oscilent Corporation RF SAW Filter | 805-RF433.92M-C Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 805-RF433.92M-C 5.0 x 5.0 SMD Remote Control Jan. 01, 2007 . TYPE : Remote Control, RF SAW Filter PART NUMBER : 805-RF433.92M-C .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 433.92 - MHz Maximum Insertion Loss 433.80 ~ 434.12 MHz - 2.0 4.0 dB Relative Passband 433.76 ~ 434.08 MHz - - 2.0 433.74 ~ 434.10 MHz - - 3.0 433.68 ~ 434.16 MHz - - 6..0 - 670 720 - Center Frequency (Fo) Relative Pass Bandwidth (BW3) Relative Passband 10.0 ~ 414.0 MHz 45 48 - 414.0 ~ 428.0 MHz 40 43 - 428.0 ~ 432.92 MHz 15 19 - 434.92 ~ 442.0 MHz 10 14 - dB kHz dB 442.0 ~ 550.0 MHz 35 38 - 550.0 ~ 1000.0 MHz 45 50 - Source Impedence (single ended)* - - 50 - ohm Load Impendance (single ended)* - - 50 - ohm Turnover To - - 25 - ºC Maximum DC Voltage - - - 0 V Maximum Input Power - - - 10 dBm Operating Temperature - -45 - +120 ºC * WITH Matching Network . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE A In B Ground C Ground D Ground E Out F Ground G Ground H Ground Oscilent Corporation RF SAW Filter | 805-RF433.92M-C Page 2 of 2 FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 805-RF433.92M-C