Oscilent Corporation IF SAW Filter | 820-IF63.0M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 820-IF63.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 24 2003 . TYPE : 63.0 MHz Bandpass Filter 3.80 MHz Bandwidth PART NUMBER : 820-IF63.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency (Fo) - 63.0 - MHz Insertion Loss at Fo - 14.0 15.0 dB 3dB Bandwidth - 3.80 - MHz 40dB Bandwidth - 5.2 - MHz Passband Ripple - 0.40 0.6 dB Group Delay Variation - 60 100 nsec Ultimate Attenuation - 50 - dB Substrate Material - LN - - * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source/Load Impedance = 50 ohms Part No.: 820-IF63.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if63_0a.htm 12/28/2005