EVERLIGHT 91-21USRC-S530-XX-XXX

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1.9mm Round Subminiature Lead LEDs
91-21USRC/S530-XX/XXX
Features
․Package in 12mm tape on 7"
diameter reels.
․Compatible with automatic
placement equipment.
․EIA Std. package.
․Mono-color type.
․Pb-free
․The product itself will remain within
RoHS compliant version.
F1
F1
F2
F2
91-21
91-21
Descriptions
․The 91-21 SMD taping is much
smaller than leaded components .
Thus enable smaller board size.
Higher packing density. Reduced
storage space and finally smaller
equipment to be obtained.
․Besides, light weight makes them
ideal for miniature applications.
․Furthermore by automation assembly
machines the accuracy is anticipated.
F7/TR7
F7/TR7
F9/TR9
F9/TR9
F10/TR10
F10/TR10
Applications
․Small indicator for indoor applications.
․Flat backlight for LCD, switches and symbols.
․Indicator and backlight in office equipment.
․Indicator and backlight for battery driven
equipment.
․Indicator and backlight for audio and video equipment.
․Automotive : backlighting in dashboards and switches.
․Telecommunication:indicator and backlighting in telephone and fax.
Device Selection Guide
Part No.
91-21USRC/S530-XX/XX
Chip
Material
Emitted Color
AlGaInP
Dark-Red
Lens Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 1 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Package Outline Dimensions
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 2 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +100
℃
Electrostatic Discharge
ESD
2000
V
Power Dissipation
Peak Forward Current
(Duty 1/10 @ 1KHz)
Pd
60
mW
IFP
60
mA
Reflow Soldering : 260 ℃ for 10 sec.
Soldering Temperature
Tsol
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Symbol
IV
Chip
Min.
Typ.
Max.
A2
160
338
----
A3
287
458
----
A4
344
578
----
A5
458
745
----
A6
573
917
----
Rank
Unit
Condition
mcd
Viewing Angle
2θ1/2
----
----
25
----
deg
Peak Wavelength
λp
----
----
639
----
nm
Dominant Wavelength
λd
----
----
631
----
nm
Spectrum Radiation
Bandwidth
△λ
----
----
20
----
nm
Forward Voltage
VF
----
----
2.0
2.4
V
Reverse Current
IR
----
----
----
10
μA
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
IF=20mA
VR=5V
Page: 3 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 4 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
xxxxxx
xxxxxx
REF: Forward Voltage Rank
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel & Carrier Tape Dimensions
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 5 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Loaded quantity per reel 1000 PCS/reel
1
TR7
TR9
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 6 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Loaded quantity per reel 1000 PCS/reel
TR10
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 7 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level : 90 %
LTPD : 10 %
Test
Sample
No.
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
6 Min.
22 Pcs.
0/1
1
Reflow Soldering
Min. 5 sec.
2
3
4
5
Temperature Cycle
H : +100℃ 15 min.
∫ 5 min.
L : -40℃ 15 min.
300 Cycles
22 Pcs.
0/1
Thermal Shock
H : +100℃ 5 min.
∫ 10 sec.
L : -10℃ 5 min.
300 Cycles
22 Pcs.
0/1
Temp. : 100℃
1000 Hrs.
22 Pcs.
0/1
Temp. : -40℃
1000 Hrs.
22 Pcs.
0/1
High Temperature
Storage
Low Temperature
Storage
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 Pcs.
0/1
7
High Temperature /
High Humidity
85℃/ 85% RH
1000 Hrs.
22 Pcs.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 8 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and
do soldering of each terminal. Be careful because the damage of the product is often started at the
time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 9 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY
EVERLIGHT ELECTRONICS CO.,LTD.
91-21USRC/S530-XX/XXX
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 10 of 10
Device No.: SZDLE-912-030
Prepared date: 19-Augr-2005
Prepared by: SKY