OSCILENT 920-AM-3E1-TTS

Oscilent Corporation | 920 Series SMD Crystal Oscillator
Page 1 of 2
SMD Oscillators
Series Number
Package
Description
Last Modified
920
5 x 7 Ceramic 6 Pad
LVDS Output
Jan. 01 2007
FEATURES
- High Frequency
- LVDS Square Wave
- Ultra-Low Jitter
- Extended Operating Temperature
- SMD Version 6 Pad
- RoHs / Lead Free compliant
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
CONDITIONS
CHARACTERISTICS
Output Logic
-
LVDS Square Wave
UNITS
-
Input Voltage (VDD)
-
3.3 ±5%
VDC
Frequency Range (fO)
-
106.250 / 212.500
MHz
Operating Temperature (TOPR)
-
0 ~ +85
°C
Storage Temperature (TSTG)
-
-55 ~ +125
°C
(a) - (e)
±50 max.
PPM
(a) Frequency Tolerance
Inclusive of Overall Stability
-
(b) Temperature Stability
Inclusive of Overall Stability (Operating Temperature)
-
(c) Input Voltage Stability
Inclusive of Overall Stability (VDD ±5%)
-
(d) Load Stability
Inclusive of Overall Stability (RL ±5%)
-
(e) Aging (@ 25°C)
±3 max.
PPM/Y
Current Consumption
-
60 max.
mA
Rise Time (Tr)
-
600 max. (20% to 80% of Waveform)
ps
Fall Time (Tf)
-
600 max. (20% to 80% of Waveform)
ps
Offset Voltage
-
1.2 ±0.1
V
Output Voltage (P-P)
-
400 ~ 800
mV
Load
-
100
Ohms
Duty Cycle
-
50 ±5
%
Start-Up Time (TS)
-
10 max.
mS
(12KHz to 20MHz)
RMS: 1 max.
ps
Overall Frequency Stability
Phase Jitter
Oscilent Corporation | 920 Series SMD Crystal Oscillator
Page 2 of 2
PIN CONNECTIONS
#1
Tri-State (Enable High)
#2
Frequency Select:
NC or Vcc: 106.25MHz
GND: 212.50MHz
#3
Ground
#4
Output
#5
Complimentary Output
#6
VDD
.
MARKING
Line 1
Oscilent
Line 2
920
PART NUMBER GUIDE
Series
Number
920
Oscilent
Series
Frequency
Voltage
Supply Option
Frequency
Tolerance &
Stability (max.)
Oper. Temp.
(°C)
Duty Cycle
Pin #1
Other
- AM
-3
E
1
-T
TS
- 001
Frequency Select:
NC or Vcc: 106.25MHz
GND: 212.50MHz
3 = 3.3VDC
E=
±50 PPM
1 = 0~+85
T = 50±5%
Tri-State
-
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic.
PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation -
CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: [email protected]
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map
Series No.:
920