Oscilent Corporation | 921 Series SMD Crystal Oscillator Page 1 of 2 SMD Oscillators Series Number Package Description Last Modified 921 5 x 7 Ceramic 6 Pad LVPECL Output Jan. 01 2007 FEATURES - High Frequency - PECL Square Wave - Ultra-Low Jitter - Extended Operating Temperature - SMD Version 6 Pad - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CONDITIONS CHARACTERISTICS Output Logic - PECL Square Wave UNITS - Input Voltage (VDD) - 3.3 ±5% VDC Frequency Range (fO) - 106.250 / 212.500 MHz Operating Temperature (TOPR) - 0 ~ +85 °C Storage Temperature (TSTG) - -55 ~ +125 °C (a) - (e) ±50 max. PPM (a) Frequency Tolerance Inclusive of Overall Stability - (b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) - (c) Input Voltage Stability Inclusive of Overall Stability (VDD ±5%) - (d) Load Stability Inclusive of Overall Stability (RL ±5%) - (e) Aging (@ 25°C) ±3 max. PPM/Y Current Consumption - 75 max. mA Rise Time (Tr) - 400 max. (20% to 80% of Waveform) ps Fall Time (Tf) - 400 max. (20% to 80% of Waveform) ps Output Voltage (Vol) - Vcc - 1.81V ~ Vcc - 1.02V - Output Voltage (Voh) - Vcc - 1.025V ~ Vcc - 0.88V - Load - 50 Ohms Duty Cycle - 50 ±5 % Start-Up Time (TS) - 10 max. mS (12KHz to 20MHz) RMS: 1 max. ps Overall Frequency Stability Phase Jitter Oscilent Corporation | 921 Series SMD Crystal Oscillator Page 2 of 2 PIN CONNECTIONS #1 Tri-State (Enable High) #2 Frequency Select: NC or Vcc: 106.25MHz GND: 212.50MHz #3 Ground #4 Output #5 Complimentary Output #6 VDD . MARKING Line 1 Oscilent Line 2 921 PART NUMBER GUIDE Series Number 921 Oscilent Series Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Oper. Temp. (°C) Duty Cycle Pin #1 Other - AM -3 E 1 -T TS - 001 Frequency Select: NC or Vcc: 106.25MHz GND: 212.50MHz 3 = 3.3VDC E= ±50 PPM 1 = 0~+85 T = 50±5% Tri-State - NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Series No.: 921