EVERLIGHT 93-21SUGC-S400-A4-TR8

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High Performance SMD LED with Reflector
93-21SUGC/S400-A4/TR8
Features
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Eia std. package.
․IC compatible.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Indicator and backlight for audio and video equipment
․Indicator and backlight for battery driven equipment.
․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Material
Emitted Color
InGaN
Brilliant Green
Lens Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 1 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
0.5± 0.07
2.2± 0.1
1.7± 0.1
1.0± 0.1
1.5± 0.1
0.4± 0.07
Package Dimensions
+
Anode mark
3.0± 0.1
4.6± 0.2
0.15± 0.05
0.62 +0.13
-0
2.7± 0.1
Polarity
0.26± 0.1
0.4± 0.1
4.34± 0.1
0.74± 0.1
0.5± 0.1
For reflow soldering (propose)
0.74± 0.1
Notes: All dimensions are in millimeters.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 2 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +100
℃
Electrostatic Discharge(HBM)
ESD
2000
V
Power Dissipation
Pd
110
mW
Peak Forward Current
(Duty 1/10 @ 1KHZ)
IFP
100
mA
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous intensity
Iv
160
250
-----
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
130
-----
deg
IF=20mA
Peak Wavelength
λp
-----
518
-----
nm
IF=20mA
Dominant Wavelength
λd
-----
525
-----
nm
IF=20mA
Spectrum Radiation
Bandwidth
△λ
-----
20
-----
nm
IF=20mA
Forward Voltage
VF
-----
3.5
4.3
V
IF=20mA
Reverse Current
IR
-----
-----
50
μA
VR=5V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 3 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 4 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 5 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 6 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
1
Reflow Soldering
2
Temperature Cycle
3
4
5
Test Condition
Temp. : 260℃±5℃
Min. 5sec.
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
Thermal Shock
High Temperature
Storage
Low Temperature
Storage
Test
Sample
Ac/Re
Hours/Cycles Size
6 min
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 7 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 8 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
93-21SUGC/S400-A4/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 2
Page: 9 of 9
Device No. : DSE-931-083
prepared date: 23-Sep2005
Prepared by: Teresa Lee