EVERLIGHT ELECTRONICS CO., LTD Technical Data Sheet High Performance with Reflector LEDs 94-22SURC/S530-XX/S2 Features： ․White package. ․Dual-chip, wide-angle, low-profile LEDs . ․Excellent chip to chip consistency ․Super Intensity ․High performance ․Pb-free ․The product itself will remain within RoHS compliant version. Applications： ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Indicator and backlight for audio and video equipment. ․Indicator and backlight for battery driven equipment. ․Display Screen Illumination on Portable Handheld Devices ․Indicator and backlight in office equipment. ․General use. Device Selection Guide Chip Lens Color Material Emitted Color AlGaInP Brilliant Red Everlight Electronics Co., Ltd. Device No. : DSE-942-042 http://www.everlight.com Prepared date: 21-Sep-2005 Water Clear Rev. 2 Page: 1 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX/S2 Package Dimensions Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 60 mW Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 60 mA Soldering Temperature Everlight Electronics Co., Ltd. Device No. : DSE-942-042 Reflow Soldering : 260 ℃ for 10 sec. Tsol http://www.everlight.com Prepared date: 21-Sep-2005 Hand Soldering : 350 ℃ for 3 sec. Rev. 2 Page: 2 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX/S2 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous intensity*1 *Chip Rank Min. Typ. A2 59 77 A3 95 106 A4 124 140 A5 155 170 IV Max. Unit ----- mcd Condition *2 IF=20mA Viewing Angle 2θ1/2 ----- ----- 130 ----- deg IF=20mA Peak Wavelength λp ----- ----- 632 ----- nm IF=20mA Dominant Wavelength λd ----- ----- 624 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- ----- 20 ----- nm IF=20mA Forward Voltage VF ----- ----- 4.0 4.8 V *2 IF=20mA Reverse Current IR ----- ----- ----- 10 μA VR=5V * 94-22SURC/S530-XX/S2 Chip Rank *1 When two LED dies are operated simultaneously. *2 For each die. Everlight Electronics Co., Ltd. Device No. : DSE-942-042 http://www.everlight.com Prepared date: 21-Sep-2005 Rev. 2 Page: 3 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX/S2 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-942-042 http://www.everlight.com Prepared date: 21-Sep-2005 Rev. 2 Page: 4 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX/S2 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Hours/Cycles Size Temp : 260℃±5℃ 1 Solder Heat 22 Pcs 10sec. Ac/Re 0/1 Temperature Cycle H : +100℃ 15min. ∫ 5 min. L : -40℃ 15min. 300 Cycles 22 Pcs. 0/1 3 Thermal Shock H : +100℃ 5min. ∫ 10 sec. L : -10℃ 5min. 300 Cycles 22 Pcs. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/R.H85% 1000 Hrs. 22 Pcs. 0/1 2 Everlight Electronics Co., Ltd. Device No. : DSE-942-042 http://www.everlight.com Prepared date: 21-Sep-2005 Rev. 2 Page: 5 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX/S2 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-942-042 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 21-Sep-2005 Rev. 2 Page: 6 of 6 Prepared by: Ray Yuan