A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS TFT DISPLAY LED Part Number: 99-215UWC/TR8 Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM MATERIALS Resin (mold) Epoxy Lens color Yellow Diffused Printed circuit board BT Emitted color White Material InGaN NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 ELECTRO-OPTICAL CHARACTERISTICS Parameter (TA=25℃) Test Condition Symbol Value MIN. TYP. MAX. 115 Viewing angle at 50% IV IF=10mA 2θ1/2 Forward voltage IF=20mA VF --- Luminous intensity IF=20mA IV 500 1100 --- Chromaticity IF=20mA X --- 0.31 --- Y --- 0.32 --- IFP 60 Peak pulsing current (1/10 duty f=1kHz) Deg 3.4 3.8 Absolute maximum ratings (SDR) Parameter Unit V mcd --mA (TA=25℃) Symbol Value Unit Forward current IF 30 mA Reverse voltage VR 5 V Reverse current IR 50 µA ESD 150 V Power Dissipation PD 120 mW Operating temperature range Top -30 ~+85 ℃ Storage temperature range Tstg -40 ~+100 ℃ Electrostatic Discharge 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 Test items and results of reliability NO 1 2 ITEM Solder Heat Temperature Cycle Test Conditions Temp：260℃±5℃ -40℃ 30min -25℃ 5min Sample Q’ty Ac/Re 5 sec 30 pcs 0/1 100 cycles 30 pcs 0/1 20 cycles 30 pcs 0/1 Test hours/cycle -105℃ 30min 3 Thermal Shock -25℃ 5min -40℃ 5min -105℃ 5min 4 High Temperature Storage Temp：85℃ 1000 hrs 30 pcs 0/1 5 Low Temperature Storage Temp：-35℃ 1000 hrs 30 pcs 0/1 6 DC Operating Life IF=350mA 1000 hrs 30 pcs 0/1 7 High Temperature／ High Humidity Ta=60℃ R.H 90% 1000 hrs 30 pcs 0/1 ＊ Refer to reliability test standard specification for in this line. 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 Color Ranks 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT HIP LED LAMPS Part Number: 99-215UWC/TR8 Typical Electro-Optical Characteristic Curves 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT HIP LED LAMPS Part Number: 99-215UWC/TR8 Typical Electro-Optical Characteristic Curves 2006/10/18