Allegro A3144EU Sensitive hall-effect switches for high-temperature operation Datasheet

Data Sheet
27621.6B*
3141 THRU
3144
SENSITIVE HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE OPERATION
X
These Hall-effect switches are monolithic integrated circuits with
tighter magnetic specifications, designed to operate continuously over
extended temperatures to +150°C, and are more stable with both
temperature and supply voltage changes. The unipolar switching
characteristic makes these devices ideal for use with a simple bar or rod
magnet. The four basic devices (3141, 3142, 3143, and 3144) are
identical except for magnetic switch points.
CC
2
3
OUTPUT
SUPPLY
1
GROUND
V
Dwg. PH-003A
Each device includes a voltage regulator for operation with supply
voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic
Hall-voltage generator, temperature compensation circuitry, smallsignal amplifier, Schmitt trigger, and an open-collector output to sink
up to 25 mA. With suitable output pull up, they can be used with
bipolar or CMOS logic circuits. The A3141– and A3142– are improved replacements for the UGN/UGS3140–; the A3144– is the
improved replacement for the UGN/UGS3120–.
The first character of the part number suffix determines the device
operating temperature range. Suffix ‘E–’ is for the automotive and
industrial temperature range of -40°C to +85°C. Suffix ‘L–’ is for the
automotive and military temperature range of -40°C to +150°C. Three
package styles provide a magnetically optimized package for most
applications. Suffix ‘–LT’ is a miniature SOT89/TO-243AA transistor
package for surface-mount applications; suffix ‘–UA’ is a three-lead
ultra-mini-SIP.
Pinning is shown viewed from branded side.
FEATURES and BENEFITS
ABSOLUTE MAXIMUM RATINGS
at TA = +25°C
Supply Voltage, VCC ............................ 28 V
Reverse Battery Voltage, VRCC ........... -35 V
Magnetic Flux Density, B .......... Unlimited
Output OFF Voltage, VOUT .................. 28 V
Reverse Output Voltage, VOUT ........... -0.5 V
Continuous Output Current, IOUT ...... 25 mA
■
■
■
■
■
■
■
■
Superior Temp. Stability for Automotive or Industrial Applications
4.5 V to 24 V Operation … Needs Only An Unregulated Supply
Open-Collector 25 mA Output … Compatible with Digital Logic
Reverse Battery Protection
Activate with Small, Commercially Available Permanent Magnets
Solid-State Reliability
Small Size
Resistant to Physical Stress
Operating Temperature Range, TA
Suffix ‘E–’ .................. -40°C to +85°C
Suffix ‘L–’ ................ -40°C to +150°C
Storage Temperature Range,
TS .............................. -65°C to +170°C
Always order by complete part number, e.g., A3141ELT .
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
FUNCTIONAL BLOCK DIAGRAM
1
VCC
REG.
X
3
OUTPUT
2
GROUND
Dwg. FH-005-2
ELECTRICAL CHARACTERISTICS at VCC = 8 V over operating temperature range.
Limits
Characteristic
Symbol
Test Conditions
Min.
Typ.
Max.
Units
Supply Voltage
VCC
Operating
4.5
—
24
V
VOUT(SAT)
IOUT = 20 mA, B > BOP
—
175
400
mV
Output Leakage Current
IOFF
VOUT = 24 V, B < BRP
—
<1.0
10
µA
Supply Current
ICC
B < BRP (Output OFF)
—
4.4
9.0
mA
Output Rise Time
tr
RL = 820 Ω, CL = 20 pF
—
0.04
2.0
µs
Output Fall Time
tf
RL = 820 Ω, CL = 20 pF
—
0.18
2.0
µs
Output Saturation Voltage
MAGNETIC CHARACTERISTICS in gauss over operating supply voltage range.
Part Numbers*
A3141–
Characteristic
BOP at TA = 25°C
over operating temp. range
BRP at TA = 25°C
over operating temp. range
Bhys at TA = 25°C
over operating temp. range
A3142–
Min.
Typ.
Max.
Min. Typ.
50
100
160
130
30
100
175
10
45
10
A3143–
A3144–
Max.
Min.
Typ.
Max.
Min.
Typ.
Max.
180
230
220
280
340
70
—
350
115
180
245
205
280
355
35
—
450
130
75
125
175
165
225
285
50
—
330
45
145
60
125
190
150
225
300
25
—
430
20
55
80
30
55
80
30
55
80
20
55
—
20
55
80
30
55
80
30
55
80
20
55
—
NOTES: Typical values are at TA = +25°C and VCC = 8 V.
BOP = operate point (output turns ON); BRP = release point (output turns OFF); Bhys = hysteresis (BOP - BRP).
1 gauss (G) is exactly equal to 0.1 millitesla (mT).
*Complete part number includes a suffix to identify operating temperature range (E- or L-) and package type ( -LT or -UA).
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 1993, 2002 Allegro MicroSystems, Inc.
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
TYPICAL OPERATING CHARACTERISTICS
A3142– SWITCH POINTS
OUTPUT SATURATION VOLTAGE
300
400
I OUT = 20 mA
V
=8V
V CC = 4.5–24 V
CC
SATURATION VOLTAGE IN mV
SWITCH POINT IN GAUSS
300
OPERATE POINT
200
RELEASE POINT
100
0
-25
25
50
100
75
125
100
0
-50
0
-50
200
150
-25
0
25
50
75
100
125
150
AMBIENT TEMPERATURE IN °C
AMBIENT TEMPERATURE IN ° C
Dwg. GH-044
Dwg. GH-040-1
SUPPLY CURRENT
SUPPLY CURRENT
10
7.0
VCC = 8 V
B ≥ B OP
SUPPLY CURRENT IN mA
SUPPLY CURRENT IN mA
8.0
B ≥ B OP
6.0
B ≤ B RP
4.0
6.0
5.0
T A = +25°C
2.0
B ≤ B RP
4.0
0
0
5
10
15
20
25
SUPPLY VOLTAGE IN VOLTS
-50
-25
0
25
75
100
125
150
AMBIENT TEMPERATURE IN °C
Dwg. GH-041-1
* Complete part number includes a suffix denoting operating temperature range (E- or L-) and package type ( -LT, -U, or -UA).
www.allegromicro.com
50
Dwg. GH-039-1
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
TYPICAL OPERATING CHARACTERISTICS (cont.)
SENSOR LOCATIONS
(±0.005” [0.13 mm] die placement)
CHANGE IN OPERATE POINT
Suffix “LT”
ACTIVE AREA DEPTH
0.0305"
0.775 mm
NOM
20
0.043"
1.09 mm
A
1
2
3
Dwg. MH-008-2D
Suffix “UA”
ACTIVE AREA DEPTH
0.0195"
0.50 mm
NOM
CHANGE IN OPERATE POINT IN GAUSS
0.089"
2.26 mm
15
T A = +25°C
10
5.0
0
-5.0
0
0.082"
2.07 mm
5
10
15
20
25
SUPPLY VOLTAGE IN VOLTS
Dwg. GH-042-1
Allegro
0.055"
1.39 mm
A
BRANDED
SURFACE
1
2
3
Dwg. MH-011-10A
OPERATION
The output of these devices (pin 3) switches low when the magnetic field
at the Hall sensor exceeds the operate point threshold (BOP). At this point, the
output voltage is VOUT(SAT). When the magnetic field is reduced to below the
release point threshold (BRP), the device output goes high. The difference in
the magnetic operate and release points is called the hysteresis (Bhys) of the
device. This built-in hysteresis allows clean switching of the output even in
the presence of external mechanical vibration and electrical noise.
Extensive applications information for Hall-effect sensors is available in:
• Hall-Effect IC Applications Guide, Application Note 27701;
• Hall-Effect Devices: Soldering, Gluing, Potting, Encapsulating, and Lead
Forming, Application Note 27703.1;
• Soldering of Through-Hole Hall-Sensor Dervices, Application Note 27703;
and
• Soldering of Surface-Mount Hall-Sensor Devices, Application Note 27703.2.
All are provided in Allegro Electronic Data Book, AMS-702. or at
www.allegromicro.com
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
PACKAGE DESIGNATOR ‘LT’
(SOT89/TO-243AA)
Dimensions in Inches
(for reference only)
0.181
0.173
0.072
0.064
0.167
0.155
0.063
0.055
2
1
3
Dimensions in Millimeters
(controlling dimensions)
0.0173
0.0138
0.090
0.084
0.102
0.090
4.25
3.94
0.0189
0.0142
0.0221
0.0173
0.047
0.035
0.059
BSC
4.60
4.40
1.83
1.62
2
1
BSC
3.00
BSC
Dwg. MA-009-3A in
Dwg. MA-009-3A mm
2.5
2.0
0.098
0.079
B
B
0.031
0.102
A
0.8
2.6
A
0.181
1
2
2.29
2.13
0.56
0.44
1.50
BSC
2.60
2.29
3
0.44
0.35
0.48
0.36
1.20
0.89
0.118
1.60
1.40
4.6
3 0.047
0.028
0.031
TYP
TYP
1
2
3
1.2
0.7
0.8
TYP
TYP
Pads 1, 2, 3, and A — Standard SOT89 Layout
Pads 1, 2, 3, and B — Low-Stress Version
Pads 1, 2, and 3 only — Lowest Stress, But Not Self Aligning
Pads 1, 2, 3, and A — Standard SOT89 Layout
Pads 1, 2, 3, and B — Low-Stress Version
Pads 1, 2, and 3 only — Lowest Stress, But Not Self Aligning
Dwg. MA-012-3 in
Dwg. MA-012-3 mm
NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.
2. Supplied in bulk pack (500 pieces per bag) or add "TR" to part number for tape and reel.
3. Only low-temperature (≤240°C) reflow-soldering techniques are recommended for SOT89 devices.
www.allegromicro.com
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
PACKAGE DESIGNATOR ‘UA’
Dimensions in Millimeters
(for reference only)
Dimensions in Inches
(controlling dimensions)
0.164
0.159
4.17
4.04
0.062
0.058
45°
1.57
1.47
45°
3.10
2.97
0.122
0.117
45°
45°
0.085
1
2
3
0.031
2.16
1
2
0.79
3
MAX
MAX
0.640
0.600
16.26
15.24
0.0173
0.0138
0.0189
0.0142
SEE NOTE
0.44
0.35
0.48
0.36
SEE NOTE
1.27
0.050
BSC
BSC
Dwg. MH-014E in
Dwg. MH-014E mm
Radial Lead Form (order A314xxUA-LC)
NOTES: 1. Tolerances on package height and width represent
allowable mold offsets. Dimensions given are
measured at the widest point (parting line).
2. Exact body and lead configuration at vendor’s option
within limits shown.
3. Height does not include mold gate flash.
4. Recommended minimum PWB hole diameter to clear
transition area is 0.035" (0.89 mm).
5. Where no tolerance is specified, dimension is nominal.
6. Supplied in bulk pack (500 pieces per bag).
1
2
3
0.108"
(2.74 mm)
0.620"
0.500"
(15.7 mm
12.7 mm)
0.100"
(2.5 mm)
Dwg. MH-026
NOTE: Lead-form dimensions are the nominals produced on the
forming equipment. No dimensional tolerance is implied or
guaranteed for bulk packaging (500 pieces per bag).
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
HALL-EFFECT SENSORS
UNIPOLAR HALL-EFFECT DIGITAL SWITCHES
Partial
Part
Number
A3121x
A3122x
A3123x
A3141x
A3142x
A3143x
A3144x
A3161E
A3163E
A3240x
A3250x
A3251x
Operate
Release
Hysteresis
Point (G)
Point (G)
(G)
Over Oper. Voltage & Temp. Range
220 to 500
80 to 410
260 to 430
120 to 360
230 to 470
160 to 330
30 to 175
10 to 145
115 to 245
60 to 190
205 to 355
150 to 300
35 to 450
25 to 430
<160 (Typ 130) >30 (Typ 110)
<160 (Typ 98)
>30 (Typ 79)
<50 (Typ 35)
>5 (Typ 25)
<50 to >350
_
<50 to >350
_
Oper.
Temp.
Packages
60 to 150
70 to 140
70 to 140
20 to 80
30 to 80
30 to 80
>20
5 to 80
5 to 40
Typ 10
5 to 35
5 to 35
E, L
E, L
E, L
E, L
E, L
E, L
E, L
E
E
E, L
J, L
J, L
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LH, LT, UA
UA
UA
A3361E
<125
>40
5 to 30
E
LH, LT, UA
A3362E
<125
>40
5 to 30
E
LH, LT, UA
Replaces
and
Comments
3019, 3113, 3119
3040, 3140
3020, 3120
2-wire operation
2-wire
chopper stabilized
programmable, chopper stabilized
programmable, chopper stabilized
2-wire, chopper stabilized,
output normally high
2-wire, chopper stabilized,
output normally low
MICROPOWER OMNIPOLAR HALL-EFFECT DIGITAL SWITCHES
Partial
Part
Number
Operate
Release
Hysteresis
Points (G)
Points (G)
(G)
Over Oper. Voltage & Temp. Range
A3209E
A3210E
A3212E
>-60, <60
>-60, <60
>-55, <55
<-5, >5
<-5, >5
<-10, >10
Typ 7.7
Typ 7.7
Typ. 8
Oper.
Temp.
Packages
Average
Supply
Current (µA)
E
E
E
LH, UA
LH, UA
LH, UA
<425 (Typ 145)
<60 (Typ 8.8)
<10 (Typ 4.2)
BIPOLAR HALL-EFFECT DIGITAL SWITCHES
Partial
Part
Number
UGx3132
UGx3133
UGx3134
A3260x
Operate
Release
Hysteresis
Point (G)
Point (G)
(G)
Over Oper. Voltage & Temp. Range
<95 (Typ 32)
<75 (Typ 32)
-40 to 50
<30 (Typ 10)
>-95 (Typ -20) >30 (Typ 52)
>-75 (Typ -20) >30 (Typ 52)
-50 to 40
5 to 55
>-30 (Typ -10)
Typ 20
Oper.
Temp.
Packages
K, L, S
K, L, S
E, L
E, L
LT, UA
LT, UA
LT, UA
LH, LT, UA
Replaces
and
Comments
3030, 3130, 3131
2 wire, chopper stabilized
Notes: 1) Typical data is at TA = +25°C and nominal operating voltage.
2) “x” = Operating Temperature Range [suffix letter or (prefix)]: S (UGN) = -20°C to +85°C, E = -40°C to +85°C,
J = -40°C to +115°C, K (UGS) = -40°C to +125°C, L (UGL) = -40°C to +150°C.
www.allegromicro.com
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
The products described herein are manufactured under one or more
of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;
5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents
pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be required
to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other rights of
third parties that may result from its use.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Similar pages