Agere A371-24BS A371-type analog uncooled isolated dfb fastlight â ¢ laser module Datasheet

Data Sheet
January 1999
A371-Type Analog Uncooled Isolated
DFB FastLight ™ Laser Module
■
No thermoelectric cooler required
■
Single- and double-isolated versions available
■
High output power: typically 2.0 mW peak power
coupled into single-mode fiber
■
Hermetically sealed active components
■
Internal back-facet monitor
■
Qualification program: Bellcore TA-983
Applications
■
Video and data applications
■
Downstream telephony and data
■
Return path systems
■
Mixed analog and digital modulation
■
Telecommunications
Benefits
The low-profile A371-Type Analog Laser Module is ideally
suited for CATV applications, particularly in systems where
long spans and superior reliability are the critical considerations.
■
Easily board mounted
■
Requires no lead bending
■
No additional heat sinks required
■
Pin compatible with industry-standard, 14-pin laser
module
■
Highly efficient DFB-MQW laser structure allows
for lower threshold and drive currents, and reduced
power consumption
■
High output power allows for longer system spans,
more fiber splits, and greater tolerance of fiber and
connector quality
■
Internal isolator minimizes spurious noise
Features
■
Eight-pin package suitable for CATV applications
■
Narrow linewidth, distributed-feedback,
multiquantum-well (DFB-MQW)1.3 µm laser with
single-mode fiber pigtail
■
■
Wide operating temperature range:
–40 °C to +85 °C
Frequency range up to 1.0 GHz
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Data Sheet
January 1999
Description
4
3
2
1
The A371-Type Uncooled Isolated Laser Module consists of a laser diode coupled to a single-mode fiber
pigtail. The device is available in a standard, 8-pin configuration (see Figure 1 and/or Table 1) and is ideal for
CATV applications.
5
6
7
8
The module includes a narrow linewidth (<1 nm), DFBMQW, single-mode laser and an InGaAs PIN photodiode back-facet monitor in a hermetically sealed package.
The device characteristics listed in this document are
met at 2.0 mW output power. Higher- or lower-power
operation is possible. Under conditions of a fixed photodiode current, the change in optical output is typically
±0.5 dB over an operating temperature range of –40 °C
to +85 °C.
This device incorporates the new Laser 2000 manufacturing process from the Optoelectronics unit of Lucent
Technologies Microelectronics Group. Laser 2000 is a
low-cost platform that targets high-volume manufacturing and tight product distributions on all optical subassemblies. This platform incorporates an advanced
optical design that is produced on Opto’s highly automated production lines. The Laser 2000 platform is
qualified for central office and uncontrolled environments, and can be used for applications requiring high
performance and low cost.
1-900 (C)
Figure 1. A371-Type Analog Uncooled Isolated DFB
Laser Module Schematic, Top View
Table 1. Pin Descriptions
Pin Number
Connection
1
2
3
4
5
6
7
8
NC
Case ground
NC
Photodiode cathode
Photodiode anode
Laser diode cathode
Laser diode anode
NC
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Maximum Peak Laser Drive Current or
Maximum Fiber Power*
Peak Reverse Laser Voltage:
Laser
Monitor
Monitor Forward Current
Operating Case Temperature Range
Storage Case Temperature Range
Lead Soldering Temperature/Time
Relative Humidity (noncondensing)
Symbol
Min
Max
Unit
IOP
PMAX
—
—
150
10
mA
mW
VRL
VRD
IFD
TC
Tstg
—
RH
—
—
—
–40
–40
—
—
2
20
2
85
85
260/10
85
V
V
mA
°C
°C
°C/s
%
* Rating varies with temperature.
2
Lucent Technologies Inc.
Data Sheet
January 1999
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Handling Precautions
Caution: This device is susceptible to damage as a result of electrostatic discharge (ESD). Take proper
precautions during both handling and testing. Follow guidelines such as JEDEC Publication No.
108-A (Dec. 1988).
Although protection circuitry is designed into the device, take proper precautions to avoid exposure to ESD.
Electro/Optical Characteristics
Table 2. Electro/Optical Characteristics (over operating temperature range unless otherwise noted)
Parameter
Operating Temperature
Range
Optical Output Power*
Threshold Current
Drive Current Above
Threshold
Slope Efficiency
Center Wavelength
Spectral Width (–20 dB)
Side-mode Suppression
Ratio
Tracking Error
Forward Voltage
Input Impedance
Monitor Current
Monitor Dark Current
Wavelength Temperature
Coefficient
Symbol
Test Conditions
Min
Typ
Max
Unit
T
—
–40
—
85
°C
PF
ITH
CW, nominal
T = 25 °C
T = full range
CW, PF = 2.0 mW, T = 25 °C
CW, IMON = const., T = full range
CW, PF = 2.0 mW, T = 25 °C
PF = 2.0 mW, CW
PF = 2.0 mW
CW, PF = 2.0 mW
—
5
2
10
7.5
67
1280
—
30
2
11
—
20
—
—
—
—
40
—
15
50
30
55
200
1335
1
—
mW
mA
mA
mA
µW/mA
nm
nm
dB
IMON = constant, CW
CW
—
†
VR = 5 V
V R† = 5 V
—
—
—
3
100
—
—
0.5
1.1
—
—
10
0.09
1.25
1.6
8
1000
200
0.1
dB
V
Ω
µA
nA
nm/°C
IMOD
SE
λC
∆λ
SMSR
TE
VF
R
IMON
ID
—
* See Table 5 for more information.
† VR = reverse voltage.
Lucent Technologies Inc.
3
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Data Sheet
January 1999
Electro/Optical Characteristics (continued)
Analog Operation
The A371-Type Laser Module has the capability of being used in a wide variety of analog operations. These may
include several channels of pure video signals, or a mix of video signals with digital data channels riding on analog
carriers. It is difficult to prepare a single battery of testing conditions that will satisfy all applications. The following
table contains a set of testing conditions that Lucent believes will give a broad indication of the performance of the
A371 Series Laser Module. Please contact your local Field Application Engineer if different testing conditions and
parametric limits are required.
The distortion characteristics are measured using a two-tone test. The frequencies are 13 MHz and 19 MHz. The
second-order distortion components are measured at f1 + f2 = 32 MHz and f1 – f2 = 6 MHz. All third-order distortion components are measured in the frequency range of 5 MHz—200 MHz, and they meet the required level. All
measurements are made with SC-SPC connectors on the laser module pigtails.
Table 3. Analog Characteristics
Parameter
Output Power*
Relative Intensity Noise
Symbol
PO
RIN
Spurious Noise
NSP
Spurious Noise (carrier off)
N'SP
Test Conditions
CW, T = –40 °C to +85 °C
CW, PF = 2.0 mW,
Freq. = 5 MHz to 300 MHz;
no fiber loss, T = –40 °C to +85 °C
–3 dB, PF = 2.0 mW,
T = –40 °C to +85 °C
T = 25 °C, PF = 2.0 mW, OMI = 0.2;
Two-tone test: f1 = 13 MHz,
f2 = 19 MHz; 20 km of fiber,
(7 dB loss) plus connector loss,
f1 ± f2
T = 25 °C, PF = 2.0 mW, OMI = 0.2;
Two-tone test: f1 = 13 MHz,
f2 = 19 MHz; 20 km of fiber
(7 dB loss), plus connector loss,
all peaks from 5 MHz—50 MHz
meet this level
T = 25 °C, PF = 2.0 mW, OMI = 0.2;
ref. to one-tone: 5 MHz to 50 MHz,
20 km of fiber, (7 dB loss) plus
connector loss
T = 25 °C, PF = 2.0 mW
Modulation Bandwidth
BW
RF Bandpass Flatness
BPF
Peak to valley, 5 MHz to 200 MHz
Second-order Distortions
—
Third-order Distortions
—
Min
—
—
Typ
2.0
–155
Max
—
–145
Unit
mW
dB/Hz
1.0
—
—
GHz
—
–54
–58†
–46
–50
–54†
–42‡
dBc
dBc
dBc
—
–70
–75†
–69
–63
–68†
–61‡
dBc
dBc
dBc
—
–63
–61
–60§
–58‡
dBc
dBc
—
—
–50
–54†
–45
—
–45
–50†
–40‡
1.0
dBc
dBc
dBc
dB
* See Table 5 for more information.
† Double-isolated version.
‡ Low-performance option.
§ Single- and double-isolated versions.
4
Lucent Technologies Inc.
Data Sheet
January 1999
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Outline Diagram
Dimensions are in inches (and millimeters).
TRADEMARK, CODE, LASER SERIAL NUMBER,
AND/OR DATE CODE IN APPROXIMATE AREA SHOWN
4
3
2
1
5
6
7
8
1.06 (27.0)
MIN
39.37 (1000) MIN
PIGTAIL LENGTH
0.52 (13.2)
0.29
(7.37)
0.045 (1.143)
0.20 (5.00)
0.165 (4.20)
0.016 (0.410)
0.110 (2.79)
0.100 (2.54)
0.300
(7.62)
0.010
(0.254)
0.085
(2.16)
0.17
(4.32)
0.30
(7.62)
1-899.f
Lucent Technologies Inc.
5
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Data Sheet
January 1999
Qualification Information
The A371-Type Laser Module has completed and passed the following qualification tests and meets the intent of
Bellcore TR-NWT-000468 for interoffice environments and TA-TSY-000983 for outside plant environments.
Table 4. A371-Type Laser Module Qualification Test Plan
Qualification Test
Conditions
500 G
Sample Size
Reference
11
MIL-STD-883
Method 2002
20 g, 20 Hz—2,000 Hz
11
MIL-STD-883
Method 2007
—
11
MIL-STD-883
Method 2007
Delta T = 100 °C
11
MIL-STD-883
Method 2003
1 kg; 3 times
11
Bellcore 983
Accelerated (Biased) Aging
85 °C, 5,000 hrs.
25
Bellcore 983
Section 5.18
High-temperature Storage
85 °C, 2,000 hrs.
11
Bellcore 983
Temperature Cycling
500 cycles
11
Bellcore 983
Section 5.20
Cyclic Moisture Resistance
10 cycles
11
Bellcore 983
Section 5.23
40 °C, 95% RH,
1,344 hrs.
11
MIL-STD-202
Method 103
<5,000 ppm water vapor
11
MIL-STD-883
Method 1018
Flammability
—
—
TR357
Sec. 4.4.2.5
ESD Threshold
—
6
Bellcore 983
Section 5.22
Mechanical Shock
Vibration
Solderability
Thermal Shock
Fiber Pull
Damp Heat
Internal Moisture
6
Lucent Technologies Inc.
Data Sheet
January 1999
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Laser Safety Information
Class IIIb Laser Product
This product complies with 21 CFR 1040.10 and 1040.11.
8.3 µm single-mode pigtail or connector
Wavelength = 1.3 µm
Maximum power = 10 mW
Because of size constraints, laser safety labeling is not affixed to the module but attached to the outside of the
shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM.
Indium Gallium Arsenide Phosphide Laser
10 mW max. Output @ 1.3 µm
µm
Class IIIb Laser Product
Complies with 21 CFR 1040.10 and 1040.11
DANGER
INVISIBLE RADIATION IS EMITTED FROM THE END OF THE FIBER OR CONNECTOR.
AVOID DIRECT EXPOSURE TO THE BEAM.
DO NOT VIEW WITH OPTICAL INSTRUMENTS.
Lucent Technologies Inc.
7
A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Data Sheet
January 1999
Ordering Information
Table 5. Ordering Information
Device Code
Comcode
Pfiber
Connector
Performance
Option
A371-20AS
A371-20BS
A371-20FS
A371-20GS
A371-20NS
108053307
108173956
108120445
108130444
108043522
2.0 mW
2.0 mW
2.0 mW
2.0 mW
2.0 mW
SC-PC
SC-APC
FC-PC
FC-APC
none
Single Isolator
Single Isolator
Single Isolator
Single Isolator
Single Isolator
A371-22AD
A371-22BD
A371-22FD
A371-22GD
A371-22ND
108348699
108348707
108348715
108348723
108348731
2.0 mW
2.0 mW
2.0 mW
2.0 mW
2.0 mW
SC-PC
SC-APC
FC-PC
FC-APC
none
Double Isolator
Double Isolator
Double Isolator
Double Isolator
Double Isolator
A371-24AS
A371-24BS
A371-24FS
A371-24GS
A371-24NS
108401019
108401027
108401035
108401043
108401050
2.0 mW
2.0 mW
2.0 mW
2.0 mW
2.0 mW
SC-PC
SC-APC
FC-PC
FC-APC
none
Low Performance
Low Performance
Low Performance
Low Performance
Low Performance
For additional information, contact your Microelectronics Group Account Manager or the following:
INTERNET:
http://www.lucent.com/micro, or for Optoelectronics information, http://www.lucent.com/micro/opto
E-MAIL:
[email protected]
N. AMERICA: Microelectronics Group, Lucent Technologies Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18103
1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)
ASIA PACIFIC: Microelectronics Group, Lucent Technologies Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256
Tel. (65) 778 8833, FAX (65) 777 7495
CHINA:
Microelectronics Group, Lucent Technologies (China) Co., Ltd., A-F2, 23/F, Zao Fong Universe Building, 1800 Zhong Shan Xi Road,
Shanghai 200233 P. R. China Tel. (86) 21 6440 0468, ext. 316, FAX (86) 21 6440 0652
JAPAN:
Microelectronics Group, Lucent Technologies Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan
Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700
EUROPE:
Data Requests: MICROELECTRONICS GROUP DATALINE: Tel. (44) 1189 324 299, FAX (44) 1189 328 148
Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)
Lucent Technologies Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No
rights under any patent accompany the sale of any such product(s) or information.FastLight is a trademark of Lucent Technologies Inc.
Copyright © 1999 Lucent Technologies Inc.
All Rights Reserved
January 1999
DS99-035LWP (Replaces DS98-433LWP)
Similar pages