AMIC A63L73361E 128k x 36 bit synchronous high speed sram with burst counter and flow-through data output Datasheet

A63L73361
128K X 36 Bit Synchronous High Speed SRAM with
Preliminary
Burst Counter and Flow-through Data Output
Document Title
128K X 36 Bit Synchronous High Speed SRAM with Burst Counter and Flowthrough Data Output
Revision History
Rev. No.
0.0
PRELIMINARY
History
Issue Date
Remark
Initial issue
July 7, 2005
Preliminary
(July, 2005, Version 0.0)
AMIC Technology, Corp.
A63L73361
128K X 36 Bit Synchronous High Speed SRAM with
Preliminary
Burst Counter and Flow-through Data Output
Features
Selectable BURST mode
SLEEP mode (ZZ pin) provided
Available in 100-pin LQFP package
Industrial operating temperature range: -45°C to
+125°C for -I series
Fast access times: 6.5/7.5/8.0 ns(153/133/117 MHz)
Single 3.3V±5% power supply
Synchronous burst function
Individual Byte Write control and Global Write
Three separate chip enables allow wide range of
options for CE control, address pipelining
General Description
Burst operations can be initiated with either the address
status processor ( ADSP ) or address status controller
( ADSC ) input pin. Subsequent burst sequence burst
addresses can be internally generated by the A63L73361
and controlled by the burst advance ( ADV ) pin. Write
cycles are internally self-timed and synchronous with the
rising edge of the clock (CLK).
This feature simplifies the write interface. Individual Byte
enables allow individual bytes to be written. BW1 controls
I/O1 - I/O9, BW2 controls I/O10 - I/O18, BW3 controls
I/O19 - I/O27, and BW4 controls I/O28 - I/O36, all on the
condition that BWE is LOW. GW LOW causes all bytes
to be written.
The A63L73361 is a high-speed SRAM containing 4.5M
bits of bit synchronous memory, organized as 128K
words by 36 bits.
The A63L73361 combines advanced synchronous
peripheral circuitry, 2-bit burst control, input registers,
output buffer and a 128K X 36 SRAM core to provide a
wide range of data RAM applications.
The positive edge triggered single clock input (CLK)
controls all synchronous inputs passing through the
registers. Synchronous inputs include all addresses (A0 A17), all data inputs (I/O1 - I/O36 ), active LOW chip
enable ( CE ), two additional chip enables (CE2, CE2 ),
burst control inputs ( ADSC , ADSP , ADV ), byte write
enables ( BWE , BW1 , BW2 , BW3 , BW4 ) and Global
Write ( GW ). Asynchronous inputs include output enable
( OE ), clock (CLK), BURST mode (MODE) and SLEEP
mode (ZZ).
PRELIMINARY
(July, 2005, Version 0.0)
1
AMIC Technology, Corp.
A63L73361
PRELIMINARY
ADSP
84
A9
ADSC
85
81
OE
86
ADV
BWE
87
A8
GW
88
82
CLK
89
83
GND
90
BW1
93
CE2
BW2
94
VCC
BW3
95
91
BW4
96
92
CE
CE2
97
A7
99
98
A6
100
Pin Configuration
I/O19
1
80
I/O18
I/O20
2
79
I/O17
I/O21
3
78
I/O16
VCCQ
4
77
VCCQ
GNDQ
5
76
GNDQ
I/O22
6
75
I/O15
I/O23
7
74
I/O14
I/O24
8
73
I/O13
I/O25
9
72
I/O12
GNDQ
10
71
GNDQ
VCCQ
11
70
VCCQ
I/O26
12
69
I/O11
I/O27
13
68
I/O10
NC
14
67
GND
VCC
15
66
NC
NC
16
65
VCC
GND
17
64
ZZ
I/O28
18
63
I/O8
I/O29
19
62
I/O7
VCCQ
20
61
VCCQ
GNDQ
21
60
GNDQ
I/O30
22
59
I/O6
I/O31
23
58
I/O5
I/O32
24
57
I/O4
I/O33
25
56
I/O3
GNDQ
26
55
GNDQ
VCCQ
27
54
VCCQ
I/O34
28
53
I/O2
I/O35
29
52
I/O1
I/O36
30
51
I/O9
45
46
47
48
49
50
A12
A13
A14
A15
A16
40
GND
A11
39
NC
44
38
NC
A10
37
A0
43
36
A1
NC
35
A2
42
34
A3
41
33
A4
NC
32
A5
(July, 2005, Version 0.0)
VCC
31
MODE
A63L73361E
2
AMIC Technology, Corp.
A63L73361
Block Diagram
ZZ
MODE
LOGIC
MODE
ADV
CLK
CLK
LOGIC
BURST
LOGIC
ADDRESS
COUNTER
CLR
ADSC
ADSP
A0-A16
ADDRESS
REGISTERS
17
9
9
GW
BWE
BW1
BW2
BYTE
WRITE
ENABLE
LOGIC
BW3
9
9
BW4
BYTE1
WRITE
DRIVER
9
BYTE2
WRITE
DRIVER
9
128KX9X4
36
OUTPUT
MEMORY
BYTE3
WRITE
DRIVER
9
BYTE4
WRITE
DRIVER
9
BUFFER
ARRAY
36
4
DATA-IN
REGISTERS
4
CE
CE2
CE2
CHIP
ENABLE
LOGIC
OUTPUT
ENABLE
LOGIC
OE
I/O1 - I/O36
PRELIMINARY
(July, 2005, Version 0.0)
3
AMIC Technology, Corp.
A63L73361
Pin Description
Pin No.
Symbol
32 – 37 , 44 - 50, 81, 82,
99, 100
A0 - A16
89
CLK
87, 93 - 96
BWE , BW1 - BW4
88
GW
Global Write
86
OE
Output Enable
92, 97, 98
CE2 ,CE2, CE
Chip Enables
83
ADV
84
ADSP
Processor Address Status
85
ADSC
Controller Address Status
31
MODE
Burst Mode: HIGH or NC (Interleaved burst)
LOW (Linear burst)
64
ZZ
1,2, 3, 6 - 9, 12, 13, 18,
19, 22 - 25, 28, 29,30,51,
52, 53,
56 - 59, 62, 63, 68, 69, 72
- 75, 78, 79,80
I/O1- I/O36
1, 14, 16, 30, 38, 39, 42,
43, 51, 66, 80
NC
No Connection
15, 41, 65, 91
VCC
Power Supply
17, 40, 67, 90
GND
Ground
4, 11, 20, 27,
54, 61, 70, 77
VCCQ
Isolated Output Buffer Supply
5, 10, 21, 26,
55, 60, 71, 76
GNDQ
Isolated Output Buffer Ground
PRELIMINARY
(July, 2005, Version 0.0)
Description
Address Inputs
Clock
Byte Write Enables
Burst Address Advance
Asynchronous Power-Down (Snooze): HIGH (Sleep)
LOW or NC (Wake up)
Data Inputs/Outputs
4
AMIC Technology, Corp.
A63L73361
Synchronous Truth Table (See Notes 1 Through 5)
Operation
Deselected Cycle,
Power-down
Deselected Cycle,
Power-down
Deselected Cycle,
Power-down
Deselected Cycle,
Power-down
Deselected Cycle,
Power-down
READ Cycle,
Begin Burst
READ Cycle,
Begin Burst
WRITE Cycle,
Begin Burst
READ Cycle,
Begin Burst
READ Cycle,
Begin Burst
READ Cycle,
Continue Burst
READ Cycle,
Continue Burst
READ Cycle,
Continue Burst
READ Cycle,
Continue Burst
WRITE Cycle,
Continue Burst
WRITE Cycle,
Continue Burst
READ Cycle,
Suspend Burst
READ Cycle,
Suspend Burst
READ Cycle,
Suspend Burst
READ Cycle,
Suspend Burst
WRITE Cycle,
Suspend Burst
WRITE Cycle,
Suspend Burst
PRELIMINARY
Address
Used
NONE
CE
CE2
CE2
ADSP
ADSC
ADV
WRITE
OE
H
X
X
X
L
X
X
X
L-H
I/O
Operation
High-Z
NONE
L
X
L
L
X
X
X
X
L-H
High-Z
NONE
L
H
X
L
X
X
X
X
L-H
High-Z
NONE
L
X
L
H
L
X
X
X
L-H
High-Z
NONE
L
H
X
H
L
X
X
X
L-H
High-Z
External
L
L
H
L
X
X
X
L
L-H
Dout
External
L
L
H
L
X
X
X
H
L-H
High-Z
External
L
L
H
H
L
X
L
X
L-H
Din
External
L
L
H
H
L
X
H
L
L-H
Dout
External
L
L
H
H
L
X
H
H
L-H
High-Z
Next
X
X
X
H
H
L
H
L
L-H
Dout
Next
X
X
X
H
H
L
H
H
L-H
High-Z
Next
H
X
X
X
H
L
H
L
L-H
Dout
Next
H
X
X
X
H
L
H
H
L-H
High-Z
Next
X
X
X
H
H
L
L
X
L-H
Din
Next
H
X
X
X
H
L
L
X
L-H
Din
Current
X
X
X
H
H
H
H
L
L-H
Dout
Current
X
X
X
H
H
H
H
H
L-H
High-Z
Current
H
X
X
X
H
H
H
L
L-H
Dout
Current
H
X
X
X
H
H
H
H
L-H
High-Z
Current
X
X
X
H
H
H
L
X
L-H
Din
Current
H
X
X
X
H
H
L
X
L-H
Din
(July, 2005, Version 0.0)
5
CLK
AMIC Technology, Corp.
A63L73361
Notes: 1. X = "Disregard", H = Logic High, L = Logic Low.
2. WRITE = L means:
1) Any BWx ( BW1 , BW2 , BW3 , or BW4 ) and BWE are low or
2) GW is low.
3. All inputs except OE must be synchronized with setup and hold times around the rising edge (L-H) of CLK.
4. For write cycles that follow read cycles, OE must be HIGH before the input data request setup time and held
HIGH throughout the input data hold time.
5. ADSP LOW always initiates an internal Read at the L-H edge of CLK. A Write is performed by setting one or
more byte write enable signals and BWE LOW or GW LOW for the subsequent L-H edge of CLK. Refer to
the Write timing diagram for clarification.
Write Truth Table
Operation
GW
BWE
BW1
BW2
BW3
BW4
READ
H
H
X
X
X
X
READ
H
L
H
H
H
H
WRITE Byte 1
H
L
L
H
H
H
WRITE all bytes
H
L
L
L
L
L
WRITE all bytes
L
X
X
X
X
X
PRELIMINARY
(July, 2005, Version 0.0)
6
AMIC Technology, Corp.
A63L73361
Linear Burst Address Table (MODE = LOW)
First Address (External)
Second Address (Internal)
Third Address (Internal)
Fourth Address (Internal)
X . . . X00
X . . . X01
X . . . X10
X . . . X11
X . . . X01
X . . . X10
X . . . X11
X . . . X00
X . . . X10
X . . . X11
X . . . X00
X . . . X01
X . . . X11
X . . . X00
X . . . X01
X . . . X10
Interleaved Burst Address Table (MODE = HIGH or NC)
First Address (External)
Second Address (Internal)
Third Address (Internal)
Fourth Address (Internal)
X . . . X00
X . . . X01
X . . . X10
X . . . X11
X . . . X01
X . . . X00
X . . . X11
X . . . X10
X . . . X10
X . . . X11
X . . . X00
X . . . X01
X . . . X11
X . . . X10
X . . . X01
X . . . X00
Absolute Maximum Ratings*
VCC & VCCQ Supply Voltages
VCC for all devices . . ….. . . . . . . . . . . . . . . . . . . . +3.3V
VCCQ for all devices . . ….. . . . . . . . . . . . . . . . . . . +3.3V
Operating ranges define those limits between which the
functionally of the device is guaranteed.
Power Supply Voltage (VCC) . . . . . . . . . . -0.5V to +4.6V
Voltage Relative to GND for any Pin Except VCC (Vin,
Vout) . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to VCC +0.5V
Power Dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . . 2W
Storage Temperature (Tbias) . . . . . . . . . . -65°C to 150 °C
Storage Temperature (Tstg) . . . . . . . . . . . -55°C to 125°C
*Comments
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to this device.
These are stress ratings only. Functional operation of
this device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied or intended. Exposure to the absolute
maximum rating conditions for extended periods may
affect device reliability.
Operating Ranges
Ambient Temperature
Commercial (C) Devices . . . . . . . . . . . . . . . 0°C to +70°C
Industrial (I) Devices . . . . . . . . . . . . . . . -45°C to +125°C
Recommended DC Operating Conditions
(0°C ≤ TA ≤ 70°C, VCC, VCCQ = 3.3V+5% or 3.3V-5%, unless otherwise noted)
Symbol
Parameter
Min.
Typ.
Max.
Unit
VCC
Supply Voltage (Operating Voltage Range)
3.135
3.3
3.465
V
VCCQ
Isolated Input Buffer Supply
3.135
3.3
3.465
V
GND
Supply Voltage to GND
0.0
-
0.0
V
VIH
Input High Voltage
2
-
VCC+0.3
V
VIHQ
Input High Voltage (I/O Pins)
2
-
VCC+0.3
V
VIL
Input Low Voltage
-0.3
-
0.8
V
PRELIMINARY
(July, 2005, Version 0.0)
7
Note
1, 2
1, 2
AMIC Technology, Corp.
A63L73361
DC Electrical Characteristics
(0°C ≤ TA ≤ 70°C, VCC, VCCQ = 3.3V+5% or 3.3V-5%, unless otherwise noted)
Symbol
Parameter
Min.
Max.
Unit
Test Conditions
Note
⏐ILI⏐
Input Leakage Current
-
±2.0
µA
All inputs VIN = GND to VCC
⏐ILO⏐
Output Leakage Current
-
±2.0
µA
OE = VIH, Vout = GND to VCC
Supply Current
-
300
mA
Device selected; VCC = max.
Iout = 0mA, all inputs = VIH or VIL
Cycle time = tKC min.
3, 11
11
ICC1
ISB1
Standby Current
ISB2
-
30
mA
Device deselected; VCC = max.
All inputs are fixed.
All inputs ≥ VCC - 0.2V
or ≤ GND + 0.2V
Cycle time = tKC min.
-
15
mA
ZZ ≥ VCC - 0.2V
VOL
Output Low Voltage
-
1.0
V
IOL = 8 mA
VOH
Output High Voltage
1.6
-
V
IOH = -4 mA
Capacitance
Symbol
Parameter
Typ.
Max.
Unit
CIN
Input Capacitance
3
4
pF
CI/O
Input/Output Capacitance
4
5
pF
Conditions
TA = 25 C; f = 1MHz
VCC = 3.3V
* These parameters are sampled and not 100% tested.
PRELIMINARY
(July, 2005, Version 0.0)
8
AMIC Technology, Corp.
A63L73361
AC Characteristics (0°C ≤ TA ≤ 70°C, VCC = 3.3V+5% or 3.3V-5%)
Symbol
-6.5
Parameter
-7.5
-8.5
Unit
Min.
Max.
Min.
Max.
Min.
Max.
Note
TKC
Clock Cycle Time
7.5
-
8.5
-
10
-
ns
TKH
Clock High Time
2.5
-
2.8
-
3.0
-
ns
TKL
Clock Low Time
2.5
-
2.8
-
3.0
-
ns
TKQ
Clock to Output Valid
-
6.5
-
7.5
-
8.5
ns
tKQX
Clock to Output Invalid
3.0
-
3.0
-
3.0
-
ns
tKQLZ
Clock to Output in Low-Z
2.5
-
2.5
-
2.5
-
ns
5, 6
tKQHZ
Clock to Output in High-Z
-
3.5
-
3.5
-
5.0
ns
5, 6
tOEQ
OE to Output Valid
-
3.5
-
3.5
-
5.0
ns
8
tOELZ
OE to Output in Low-Z
0
-
0
-
0
-
ns
5, 6
tOEHZ
OE to Output in High-Z
-
3.5
-
3.5
-
5.0
ns
5, 6
Setup Times
TAS
Address
1.5
-
2.0
-
2.0
-
ns
7, 9
tADSS
Address Status ( ADSC , ADSP )
1.5
-
2.0
-
2.0
-
ns
7, 9
tADVS
Address Advance ( ADV )
1.5
-
2.0
-
2.0
-
ns
7, 9
Write Signals
1.5
-
2.0
-
2.0
-
ns
7, 9
tWS
( BW1 , BW2 , BW3 , BW4 , BWE , GW )
TDS
Data-in
1.5
-
1.5
-
2.0
-
ns
7, 9
tCES
Chip Enable ( CE , CE2, CE2 )
1.5
-
2.0
-
2.0
-
ns
7, 9
Hold Times
TAH
Address
0.5
0.5
0.5
ns
7, 9
tADSH
Address Status ( ADSC , ADSP )
0.5
0.5
0.5
ns
7, 9
tAAH
Address Advance ( ADV )
0.5
0.5
0.5
ns
7, 9
tWH
Write Signal
0.5
0.5
0.5
ns
7, 9
( BW1 , BW2 , BW3 , BW4 , BWE , GW )
TDH
Data-in
0.5
0.5
0.5
ns
7, 9
tCEH
Chip Enable ( CE , CE2, CE2 )
0.5
0.5
0.5
ns
7, 9
PRELIMINARY
(July, 2005, Version 0.0)
9
AMIC Technology, Corp.
A63L73361
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
All voltages refer to GND.
Overshoot: VIH ≤ +2V for t ≤ tKC/2.
Undershoot: VIL ≥ -0.7V for t ≤ tKC/2.
Power-up: VIH ≤ +2 and VCC ≤ 1.7V
for t ≤ 200ms
ICC1 is given with no output current. ICC1 increases with greater output loading and faster cycle times.
Test conditions assume the output loading shown in Figure 1, unless otherwise specified.
For output loading, CL = 5pF, as shown in Figure 2. Transition is measured ±150mV from steady state voltage.
At any given temperature and voltage condition, tKQHZ is less than tKQLZ and tOEHZ is less than tQELZ.
A WRITE cycle is defined by at least one Byte Write enable LOW and ADSP HIGH for the required setup and hold
times. A READ cycle is defined by all byte write enables HIGH and ( ADSC or ADV LOW) or ADSP LOW for the
required setup and hold times.
OE has no effect when a Byte Write enable is sampled LOW.
This is a synchronous device. All addresses must meet the specified setup and hold times for all rising edges of CLK
when either ADSP or ADSC is LOW and the chip is enabled. All other synchronous inputs must meet the setup and
hold times with stable logic levels for all rising edges of clock (CLK) when the chip is enabled. Chip enable must be
valid at each rising edge of CLK when either ADSP or ADSC is LOW to remain enabled.
The load used for VOH, VOL testing is shown in Figure 2. AC load current is higher than the given DC values.
AC I/O curves are available upon request.
"Device Deselected" means device is in POWER-DOWN mode, as defined in the truth table. "Device Selected" means
device is active (not in POWER-DOWN mode).
MODE pin has an internal pulled-up, and ZZ pin has an internal pulled-down. All of then exhibit an input leakage
current of 10µA.
Snooze (ZZ) input is recommended that users plan for four clock cycles to go into SLEEP mode and four clocks to
emerge from SLEEP mode to ensure no data is lost.
PRELIMINARY
(July, 2005, Version 0.0)
10
AMIC Technology, Corp.
A63L73361
Timing Waveforms
tKC
CLK
tKH
tKL
tADSS
tADSH
ADSP
tADSS
Deselect cycle
tADSH
ADSC
tAS
tAH
A1
ADDRESS
A2
tWS
A3
tWH
GW,BWE
BW1-BW4
tCES
Deselect with CE
tCEH
CE
(NOTE 2)
tADVS
tADVH
ADV
ADV suspends burst
(NOTE 3)
OE
tOEQ
tOELZ
tOEHZ
tKQLZ
DOUT
High-Z
Q(A1)
tKQ
tKQ
tKQHZ
tKQX
Q(A2)
tKQX
Q(A2+1)
Q(A2+2)
Q(A2+3)
Q(A3)
(NOTE *1)
Single READ
BURST READ
Don't Care
Undefined
Read Timing
Notes: 1. QA(2) refers to output from address A2. Q(A2+1) refers to output from the next internal burst address following A2.
2. CE and CE2 have timing identical to CE . On this diagram, when CE is LOW, CE2 is LOW and CE2 is HIGH.
When CE is HIGH, CE2 is HIGH and CE2 is LOW.
3. Timing is shown assuming that the device was not enabled before entering into this sequence. OE does not
cause Q to be driven until after the following clock rising edge.
PRELIMINARY
(July, 2005, Version 0.0)
11
AMIC Technology, Corp.
A63L73361
Timing Waveforms (continued)
tKC
CLK
tKH
tKL
tADSS
tADSH
ADSP
tADSS
ADSC extends burst
tADSS
tADSH
tADSH
ADSC
tAS
tAH
A1
ADDRESS
A2
A3
BYTE W RITE signals are ignored
for first cycle when ADSP initiates burst
tWS
tWH
BW E,BW 1-BW 4
(NOTE 5)
tWS
tWH
GW
tCES
tCEH
CE
(NOTE 2)
tADVS
tADVH
ADV
(NOTE 4)
OE
(NOTE 3)
tDS
DIN
ADV suspends burst
High-Z
tDH
D(A1)
tOEHZ
D(A2)
D(A2+1)
D(A2+1)
D(A2+2)
D(A2+3)
D(A3)
D(A3+1)
D(A3+2)
(NOTE 1)
DOUT
BURST READ
Single W RITE
Extended BURST W RITE
Don't Care
Undefined
Write Timing
Notes: 1. D(A2) refers to output from address A2. D(A2+1) refers to output from the internal burst address immediately
following A2.
2. Timing for CE2 and CE2 is identical to that for CE . As shown in the above diagram, when CE is LOW, CE2
is LOW and CE2 is HIGH. When CE is HIGH, CE2 is HIGH and CE2 is LOW.
3. OE must be HIGH before the input data setup, and held HIGH throughout the data hold period. This prevents
input/output data contention for the period prior to the time Byte Write enable inputs are sampled.
4. ADV must be HIGH to permit a Write to the loaded address.
5. Byte Write enables are decided by means of a Write truth table.
PRELIMINARY
(July, 2005, Version 0.0)
12
AMIC Technology, Corp.
A63L73361
Timing Waveforms (continued)
tKC
CLK
tKH
tKL
tADSS
tADSH
ADSP
ADSC
tAS tAH
ADDRESS
A2
A1
A4
A3
tWS
tWH
tDS
tDH
A5
A6
GW,BWE,
BW1-BW4
(NOTE 3)
tCES
tCEH
CE
(NOTE 2)
ADV
OE
tKQ
DIN
High-Z
tOELZ
D(A3)
D(A5)
D(A6)
tOEHZ
tKQ
DOUT
Q(A1)
Q(A2)
Back-to-Back READs
Q(A4)
Single WRITE
(NOTE 1)
Q(A4+1)
Q(A4+2)
BURST READ
Q(A4+3)
Back-to-Back
WRITEs
Don't Care
Undefined
Read/Write Timing
Notes: 1. Q(A4) refers to output from address A4. Q(A4+1) refers to output from the next internal burst address following A4.
2. CE2 and CE2 have timing identical to CE . On this diagram, when CE is LOW, CE is LOW and CE2 is HIGH,
When CE is HIGH, CE2 is HIGH and CE2 is LOW.
3. The data bus (Q) remains in High-Z following a WRITE cycle unless an ADSP , ADSC , or ADV cycle is
performed.
4. Byte Write enables are decided by means of a Write truth table.
5. Back-to-back READs may be controlled by either ADSP or ADSC
PRELIMINARY
(July, 2005, Version 0.0)
13
AMIC Technology, Corp.
A63L73361
AC Test Conditions
Input Pulse Levels
GND to 3V
Input Rise and Fall Times
1 ns
Input Timing Reference Levels
1.5V
Output Reference Levels
VccQ/2
Output Load
See Figures 1 and 2
Figure 1. Output Load Equivalent Figure
2. Output Load Equivalent
VCCQ/2
Q
50Ω
RL=50Ω
ZO=50Ω
Q
5pF
VT=0.75V
Ordering Information
Part No.
Access Times (ns)
Frequency (MHz)
A63L73361E-6.5
6.5
153
100L LQFP
A63L73361E-6.5F
6.5
153
100L Pb-Free LQFP
A63L73361E-7.5
7.5
133
100L LQFP
A63L73361E-7.5F
7.5
133
100L Pb-Free LQFP
A63L73361E-8
8
117
100L LQFP
A63L73361E-8F
8
117
100L Pb-Free LQFP
PRELIMINARY
(July, 2005, Version 0.0)
14
Package
AMIC Technology, Corp.
A63L73361
Package Information
LQFP 100L Outline Dimensions
unit: inches/mm
HE
A2
A1
y
D
E
80
51
50
100
31
1
L1
L
HD
D
81
30
e
b
c
θ
Symbol
A1
Dimensions in inches
Dimensions in mm
Min.
Nom.
Max.
Min.
Nom.
Max.
0.002
-
-
0.05
-
-
A2
0.053
0.055
0.057
1.35
1.40
1.45
b
0.011
0.013
0.015
0.27
0.32
0.37
c
0.005
-
0.008
0.12
-
0.20
HE
0.860
0.866
0.872
23.35
22.00
22.15
E
0.783
0.787
0.791
19.90
20.00
20.10
HD
0.624
0.630
0.636
15.85
16.00
16.15
D
0.547
0.551
0.555
13.90
14.00
14.10
e
L
0.026 BSC
0.018
L1
0.024
0.65 BSC
0.030
0.45
0.039 REF
0.60
0.75
1.00 REF
y
-
-
0.004
-
-
0.1
θ
0°
3.5°
7°
0°
3.5°
7°
Notes:
1. Dimensions D and E do not include mold protrusion.
2. Dimensions b does not include dambar protrusion.
Total in excess of the b dimension at maximum material condition.
Dambar cannot be located on the lower radius of the foot.
PRELIMINARY
(July, 2005, Version 0.0)
15
AMIC Technology, Corp.
Similar pages