ETC2 AA003-02 Aa and ab-series analog sensor Datasheet

AA and AB-Series Analog Sensors
AA and AB-Series Analog Sensors
NVE’s AA and AB-Series analog GMR sensors offer unique and unparalleled magnetic sensing
capabilities. These sensors are characterized by high sensitivity to applied magnetic fields, excellent
temperature stability, low power consumption, and small size. These characteristics make them
suitable for use in a wide variety of applications from rugged industrial and automotive position,
speed, and current sensors, to low-voltage, battery-powered sensors for use in hand-held
instrumentation and implantable medical devices. The unmatched versatility of these basic magnetic
sensors makes them an excellent choice for a wide range of analog sensing applications.
The AA-Series sensors use NVE’s patented GMR materials and on-chip flux concentrators to provide
a directionally sensitive output signal. These sensors are sensitive in one direction in the plane of the
IC, with a cosine-scaled falloff in sensitivity as the sensor is rotated away from the sensitive direction.
Also, these devices provide the same output for magnetic fields in the positive or negative direction
along the axis of sensitivity (omnipolar output). All sensors are designed in a Wheatstone bridge
configuration to provide temperature compensation. Two packages are offered, an SOIC8 and an
MSOP8. These sensors are also available in die form on a special-order basis.
There are three families of NVE’s basic AA-Series sensors: the standard AA-Series, the AAH-Series,
and the AAL-Series. Each of these sensor families uses a different GMR material, with its own
characteristics. The comparison table below summarizes the different characteristics of the GMR
materials:
Parameter
Sensitivity to Applied Fields
Field Range of Operation
Hysteresis
Temperature Range
AA Series
High
High
Medium
High
AAH Series
Very High
Low
High
Very High
AAL Series
High
Medium
Low
Very High
The AB-Series sensors are differential sensor devices, or gradiometers, which take advantage of the
high output characteristics of NVE’s GMR materials. Two families of AB sensors are offered, the
standard AB-Series and the ABH-Series. They have operational characteristics similar to the AA and
AAH sensors described in the table above but with the bipolar linear output characteristics of a
differential sensor.
Within these different sensor families, customers can find an excellent match to their analog sensor
requirements.
- 12 www.nve.com phone: 952-829-9217 fax: 952-829-9189
AA and AB-Series Analog Sensors
Quick Reference: AA and AB-Series
For comparison and product selection purposes, the following table lists all available AA and ABSeries analog sensors, with some of their key characteristics:
Magnetometers:
Part
Number
AA002-02
AA003-02
AA004-00
AA004-02
AA005-02
AA006-00
AA006-02
AAH002-02
AAH004-00
AAL002-02
Linear
Range
1
(|Oe |)
Min
Max
1.5
10.5
2.0
14
5.0
35
5.0
35
10.0
70
5.0
35
5.0
35
0.6
3.0
1.5
7.5
1.5
10.5
Maximum
Nonlinearity
2
(% Uni. )
Maximum
Hysteresis
2
(% Uni. )
Maximum
Operating
Temp
(°C)
Typical
Resistance
(Ohms)
Package
2
2
2
2
2
2
2
6
4
2
4
4
4
4
4
4
4
15
15
2
125
125
125
125
125
125
125
150
150
150
5K
5K
5K
5K
5K
30K
30K
2K
2K
5.5K
SOIC8
SOIC8
MSOP8
SOIC8
SOIC8
MSOP8
SOIC8
SOIC8
MSOP8
SOIC8
Resistor
Spacing
(mm)
Maximum
Nonlinearity
2
(% Uni. )
Maximum
Hysteresis
2
(% Uni. )
Maximum
Operating
Temp
(°C)
Typical
Resistance
(Ohms)
Package
0.5
0.5
0.5
2
2
4
4
4
15
125
125
150
2.5K
2.5K
1.2K
SOIC8
MSOP8
MSOP8
Sensitivity
1
(mV/V-Oe )
Min
Max
3.0
4.2
2
3.2
0.9
1.3
0.9
1.3
0.45 0.65
0.9
1.3
0.9
1.3
11.0 18.0
3.2
4.8
3.0
4.2
Gradiometers:
Part
Number
AB001-02
AB001-00
ABH001-00
Linear
Range
1
(|Oe |)
Min
Max
20
200
20
200
5
40
Notes:
1. Oersted (Oe) = 1 Gauss in air.
2. Unipolar operation means exposure to magnetic fields of one polarity, for example 0 to +30 Gauss, or -2 to -50 Gauss.
Bipolar operation (for example, -5 to +10 Gauss) will increase nonlinearity and hysteresis
- 13 www.nve.com phone: 952-829-9217 fax: 952-829-9189
AA Sensors
AA Sensors
Features:
•
•
•
•
•
•
•
Excellent Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Operating Temperature to 125°C Continuous
Wide Linear Range of Operation
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
Small, Low-Profile Surface Mount Packages
Applications:
•
•
•
•
General Motion, Speed, and Position Sensing
Low Power, Low Voltage Applications
Low Field Sensing for Magnetic Media Detection
Current Sensing
Description:
The basic AA-Series GMR sensors are general-purpose magnetometers for use in a wide variety of
applications. They exhibit excellent linearity, a large output signal with applied magnetic fields, stable
and linear temperature characteristics, and a purely ratiometric output.
Pin-out
V+ (supply)
Functional Block Diagram
OUT+
pin 8,
V+(supply)
NVE
NVE
AAxxx
AAXXX-02
-02
shield
GMR
pin 5, OUT+
Orientation
chamfer
Pin 1
shield
OUT V- (ground)
Axis of Sensitivity
pin 1, OUT-
pin 4, V(ground)
Magnetic Characteristics:
Part
Number
AA002-02
AA003-02
AA004-00
AA004-02
AA005-02
AA006-00
AA006-02
Saturation
1
Field (Oe )
15
20
50
50
100
50
50
Linear
Range
1
(|Oe |)
Min
Max
1.5
10.5
2.0
14
5
35
5
35
10
70
5
35
5
35
Sensitivity
1
(mV/V-Oe )
Min
Max
3.0
4.2
2
3.2
0.9
1.3
0.9
1.3
0.45 0.65
0.9
1.3
0.9
1.3
Resistance
(Ohms)
Package
5K ±20%
5K ±20%
5K ±20%
5K ±20%
5K ±20%
30K ±20%
30K ±20%
SOIC8
SOIC8
MSOP8
SOIC8
SOIC8
MSOP8
SOIC8
2
- 14 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Die Size
(µm)
3
436x3370
436x3370
411x1458
411x1458
411x1458
836x1986
836x1986
AA Sensors
General Characteristics:
Parameter
Input Voltage Range
Operating Frequency
Operating Temperature Range
Bridge Electrical Offset
Signal Output at Max. Field
Nonlinearity
Hysteresis
TCR
TCOI
TCOV
Off Axis Characteristic
ESD Tolerance
Min
4
<1
DC
-50
-4
Typical
Max
4
24
>1
125
+4
Unit
Volts
MHz
°C
mV/V
mV/V
5
% (unipolar)
5
% (unipolar)
6
% / °C
6
% / °C
6
% / °C
60
2
4
+0.14
+0.03
-0.1
7
Cos β
400
V pin-to-pin HBM
Notes:
1.
1 Oersted (Oe) = 1 Gauss in air.
2.
See the Appendix for package dimensions and tolerances.
3.
Sensors can be provided in die form by special request.
4.
GMR AA-Series sensors are pure ratiometric devices meaning that they will operate properly at extremely low supply
voltages. The output signal will be proportional to the supply voltage. Maximum voltage range is limited by the power
dissipation in the package and the maximum operating temperature of the sensor.
5.
Unipolar operation means exposure to magnetic fields of one polarity, e.g., 0 to 30 Gauss, or 2 to -50 Gauss, but not -20 to
+30 Gauss (bipolar operation). Bipolar operation will increase nonlinearity and hysteresis.
TCR is resistance change with temperature with no applied field. TCOI is the output change with temperature using a
6.
constant current source to power the sensor. TCOV is the output change with temperature using a constant voltage source
to power the sensor. See the graphs below.
7.
Beta (β) is any angle deviation from the sensitive axis.
AA002 Tem perature Performance, 5V Supply
0.35
0.3
0.3
0.25
0.25
0.2
0.2
Output Voltage (V)
Output Voltage (V)
AA002 Temperature Performance,
1m A Curre nt Supply
0.35
0.15
-40C
0.1
0.15
-40C
0.1
25C
25C
85C
85C
125C
0.05
0
-20
125C
0.05
0
-15
-10
-5
0
5
10
15
-20
20
-0.05
-15
-10
-5
0
5
-0.05
Applied Magnetic Field (Oe)
Applie d M agnetic Field (Oe)
- 15 www.nve.com phone: 952-829-9217 fax: 952-829-9189
10
15
20
AAH Sensors
AAH Sensors
Features:
•
•
•
•
•
•
Extremely High Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Temperature Tolerance to 150°C Continuous
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
Small, Low-Profile Surface Mount Packages
Applications:
•
•
•
•
Low Voltage, High Temperature Applications
Low Field Sensing for Magnetic Media Detection
Earth’s Magnetic Field Detection
Current Sensing
Description:
The AAH-Series GMR sensors are manufactured with a high sensitivity GMR material, making them
ideally suited for any low magnetic field application. They are also extremely temperature tolerant, to
+150°C operating temperatures.
Pin-out
V+ (supply)
Functional Block Diagram
OUT+
pin 8,
V+(supply)
NVE
NVE
AAxxx
AAXXX-02
-02
shield
GMR
pin 5, OUT+
Orientation
chamfer
Pin 1
shield
OUT V- (ground)
Axis of Sensitivity
pin 1, OUT-
pin 4, V(ground)
Magnetic Characteristics:
Part
Number
AAH002-02
AAH004-00
Saturation
1
Field (Oe )
6
15
Linear
Range
1
(|Oe |)
Min
Max
0.6
3.0
1.5
7.5
Sensitivity
1
(mV/V-Oe )
Min
Max
11.0 18.0
3.2
4.8
Resistance
(Ohms)
Package
2K ±20%
2K ±20%
SOIC8
MSOP
2
- 16 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Die Size
(µm)
3
436x3370
411x1458
AAH Sensors
General Characteristics:
Parameter
Input Voltage Range
Operating Frequency
Operating Temperature Range
Bridge Electrical Offset
Signal Output at Max. Field
Nonlinearity
Hysteresis
TCR
TCOI
TCOV
Off Axis Characteristic
ESD Tolerance
Min
4
<1
DC
-50
-5
Typical
Max
4
±12
>1
150
+5
40
4
15
+0.11
+0.10
0.0
7
Cos β
400
Unit
Volts
MHz
°C
mV/V
mV/V
5
% (unipolar)
5
% (unipolar)
6
% / °C
6
% / °C
6
% / °C
V pin-to-pin HBM
Notes:
1.
1 Oersted (Oe) = 1 Gauss in air.
2.
See the Appendix for package dimensions and tolerances.
3.
Sensors can be provided in die form by special request.
4.
GMR AAH-Series sensors are pure ratiometric devices meaning that they will operate properly at extremely low supply
voltages. The output signal will be proportional to the supply voltage. Maximum voltage range is limited by the power
dissipation in the package and the maximum operating temperature of the sensor.
5.
Unipolar operation means exposure to magnetic fields of one polarity, e.g. 0 to 30 Gauss, or -2 to -50 Gauss, but not -20 to
+30 Gauss (bipolar operation). Bipolar operation will increase nonlinearity and hysteresis.
TCR is resistance change with temperature with no applied field. TCOI is the output change with temperature using a
6.
constant current source to power the sensor. TCOV is the output change with temperature using a constant voltage source
to power the sensor.
7.
Beta (β) is any angle deviation from the sensitive axis.
AAH002 Temperature Performance, 5V Supply
0.4
0.35
0.35
0.3
0.3
0.25
0.25
Voltage Output (V)
Output Voltage (V)
AAH002 Temperature Performance,
2.28mA Current Source
0.4
0.2
0.15
-40C
0.1
0.2
0.15
-40C
0.1
25C
25C
85C
0.05
85C
0.05
125C
125C
0
-20
0
-20
-15
-10
-5
0
5
10
15
20
-15
-10
-5
0
5
-0.05
-0.05
Applied Magnetic Field (Oe)
Applied Magnetic Field (Oe)
- 17 www.nve.com phone: 952-829-9217 fax: 952-829-9189
10
15
20
AAL Sensors
AAL Sensors
Features:
•
•
•
•
•
•
•
Excellent Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Temperature Tolerance to 150°C Continuous
Very Low Magnetic Hysteresis
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
Small, Low-Profile Surface Mount Packages
Applications:
•
•
•
•
General Motion, Speed, and Position Sensing
Low Voltage, High Temperature Applications
Low Field Sensing for Magnetic Media Detection
Current Sensing
Description:
The AAL-Series GMR sensors are manufactured with a low hysteresis GMR material, for use in
magnetometer applications where minimum hysteresis is important. They are also extremely
temperature tolerant, to +150°C operating temperatures.
Pin-out
V+ (supply)
Functional Block Diagram
OUT+
pin 8,
V+(supply)
NVE
NVE
AAxxx
AAXXX-02
-02
shield
GMR
pin 5, OUT+
Orientation
chamfer
Pin 1
shield
OUT -
pin 1, OUT-
V- (ground)
pin 4, V(ground)
Axis of Sensitivity
Magnetic Characteristics:
Part
Number
AAL002-02
Saturation
1
Field (Oe )
15
Linear
Range
1
(|Oe |)
Min
Max
1.5
10.5
Sensitivity
1
(mV/V-Oe )
Min
Max
3.0
4.2
Resistance
(Ohms)
Package
5.5K ±20%
SOIC8
2
- 18 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Die Size
(µm)
3
436x3370
AAL Sensors
General Characteristics:
Parameter
Input Voltage Range
Operating Frequency
Operating Temperature Range
Bridge Electrical Offset
Signal Output at Max. Field
Nonlinearity
Hysteresis
TCR
TCOI
TCOV
Off Axis Characteristic
ESD Tolerance
Min
4
<1
DC
-50
-4
Typical
Max
4
±25
>1
150
+4
Unit
Volts
MHz
°C
mV/V
mV/V
5
% (unipolar)
5
% (unipolar)
6
% / °C
6
% / °C
6
% / °C
45
2
4
+0.11
-0.28
-0.40
7
Cos β
400
V pin-to-pin HBM
Notes:
1.
1 Oersted (Oe) = 1 Gauss in air.
2.
See the Appendix for package dimensions and tolerances.
3.
Sensors can be provided in die form by special request.
4.
GMR AAL-Series sensors are pure ratiometric devices meaning that they will operate properly at extremely low supply
voltages. The output signal will be proportional to the supply voltage. Maximum voltage range is limited by the power
dissipation in the package and the maximum operating temperature of the sensor.
5.
Unipolar operation means exposure to magnetic fields of one polarity, e.g. 0 to 30 Gauss, or -2 to -50 Gauss, but not -20 to
+30 Gauss (bipolar operation). Bipolar operation will increase nonlinearity and hysteresis.
TCR is resistance change with temperature with no applied field. TCOI is the output change with temperature using a
6.
constant current source to power the sensor. TCOV is the output change with temperature using a constant voltage source
to power the sensor.
7.
Beta (β) is any deviation angle from the sensitive axis.
AAL002 Temperature Performance,
1mA Current Supply
AAL002 Temperature Performance, 5V Supply
0.35
0.35
0.3
-40C
25C
85C
125C
0.3
0.25
Output Voltage (V)
Output Voltage (V)
0.25
0.2
0.15
0.1
-40C
0.2
0.15
0.1
25C
0.05
85C
0.05
125C
0
0
-30
-30
-20
-10
0
10
20
-20
-10
0
10
30
-0.05
-0.05
Applie d M ag ne tic F ie ld (O e )
Applied Magnetic Field (Oe)
- 19 www.nve.com phone: 952-829-9217 fax: 952-829-9189
20
30
AAV Sensors
AAV Sensors
Features:
•
•
•
•
•
•
•
Operates in Magnetic Saturation, 30 to 200 Gauss
Half-Bridge or Individual Resistor Configurations
Sine and Cosine Outputs Available
Utilizes Spin Valve GMR Material
Precise Detection of Magnetic Field
Ultra-Small PLLP Package
Cannot Be Damaged by Large External Magnetic Fields
Description:
The AAV001-11 and AAV002-11 are arrays of four GMR resistors rotated at 90-degree intervals in
the package. The AAV001-11 features independent resistors that can be wired together to form two
half-bridges, or used as independent resistors. The AAV002-11 has the bridge connections made
internally to the package. For either part, the output can be configured to represent the sine and cosine
function of the magnetic field being applied to the sensor. Each resistor is 1.5 kΩ nominal resistance
and output of each half-bridge is ratiometric with the power supply voltage. The part features NVE’s
PLLP6 housing, which is a 3.0 mm x 3.0 mm x 0.9 mm thick surface mount package.
Operation:
The sensor elements contain two magnetic layers: a pinned, or fixed-direction layer, and a movable or
free layer. The diagram below illustrates the configuration with arrows representing the two layers:
r
ye
La
ee
Fr
Ap
p
(3 lied
0t M
o 2 ag
00 net
Ga ic F
us iel
s) d
Pinned Layer
Angle Between Pinned
and Free Layers
Determines Electrical
Resistance of Sensor
Free Layer Aligns
with the Applied
Magnetic Field
- 20 www.nve.com phone: 952-829-9217 fax: 952-829-9189
AAV Sensors
The end user must apply a saturating magnetic field (30 to 200 Oersteds) in the plane of the sensor in
order for the sensor to operate. The movable layer will align with the applied magnetic field. As the
applied field changes direction the angle between the movable layer and the pinned layer changes,
resulting in a change of resistance in the device. A graph of the device resistance vs. the angle between
the pinned layer and the movable layer is shown below:
Resistance (Ohms)
Resistance Change of Spin Valve
Sensor Element
1520
1510
1500
1490
1480
1470
1460
1450
1440
1430
1420
0
90
180
270
360
Angle Between Pinned and Movable Layers
Four individual sensor resistors are supplied in the package, each with the pinned layer rotated 90º with
respect to that of the previous sensor. These resistors can be connected in two half-bridge
configurations to provide a sine and cosine output or monitored individually to provide an absolute
indication of the angle between the pinned layer and the movable layer.
- 21 www.nve.com phone: 952-829-9217 fax: 952-829-9189
AAV Sensors
A drawing showing the ICs position in the package is given below. On each IC there is an arrow
indicating the direction of the pinned layer.
Functional Block Diagram, Marking, and Pinout, AAV001-11:
Cosine Output
BBP
R3
R2
R3 (Cosine)
R2 (Sine)
VCC
GND
R1 (Sine)
R4 (Cosine)
R1
R4
- 22 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Sine Output
AAV Sensors
Functional Block Diagram, Marking, and Pinout, AAV002-11:
BBQ
VCC
R3 (Cosine)
Cosine Output
R2 (Sine)
Cos
Sin
R4 (Cosine)
Sine Output
R1 (Sine)
GND
Specifications:
Parameter
Nominal Resistance of Each Resistor
Maximum Resistance Decrease with Field
Change
Required Strength of Applied Magnetic Field
Measurement Error
Supply Voltage
Offset Voltage
Temperature Range of Operation
Storage Temperature
Temperature Coefficient of Resistance
3
TCOV
3
TCOI
Test
Condition
25°C
Operating at
25°C
Operating
Operating
Operating
Operating at
25°C
Operating
Min
1200
4.5%
Typ
1500
5.2%
Max
1800
7%
Units
Ohms
-10
200
2
12
10
Oersted
Degrees
Volts
mV/V
-40
-40
150
170
°C
°C
%/°C
%/°C
%/°C
30
Operating
Operating
Operating
+0.3
-0.24
-0.16
2
Notes:
1.
Large Magnetic Fields WILL NOT cause damage to NVE GMR Sensors.
2.
1 Oe (Oersted) = 1 Gauss in air = 0.1 mTesla = 79.8 Amps/meter.
3.
TCOV is the percent change in output signal over temperature with a constant voltage source powering the part and TCOI
is the percent change in output over temperature with a constant current source.
- 23 www.nve.com phone: 952-829-9217 fax: 952-829-9189
AB Sensors
AB Sensors
Features:
•
•
•
•
•
•
•
Excellent Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Temperature Tolerance to 125°C Continuous
Wide Linear Range of Operation
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
Small, Low-Profile Surface Mount Packages
Applications:
•
•
•
General Differential Field Sensing
Gear Tooth and Encoder Speed and Position Sensing
Low Power, Low Voltage Applications
Description:
The AB-Series GMR sensors are general-purpose gradiometers for use in a wide variety of
applications. Two pairs of unshielded GMR sensor elements provide for directional sensing of small
gradients in large and small magnetic fields. The ability to detect only magnetic gradients allows low
sensitivity to external sources of uniform magnetic field allowing these sensors to work successfully in
high magnetic noise environments such as near electric motors or current carrying wires.
Functional Block diagram
Pinout
V+ (supply)
OUT B
pin 8, V+(supply)
GMR
NVE
ABxxx-02
X
Y
X
pin 5, OUT B
Y
X
Y
pin 1, OUT A
Pin 1
OUT A
pin 4, V(ground)
V- (ground)
Axis of Sensitivity
Magnetic Characteristics:
Part
Number
AB001-02
AB001-00
Saturation
1
Field (Oe )
250
250
Linear
Range
1
(|Oe |)
Min
Max
10
175
10
175
Resistor
Sensitivity
1
(%R / Oe )
Min
Max
0.02 0.03
0.02 0.03
Resistance
(Ohms)
Package
2.5K ±20%
2.5K ±20%
SOIC8
MSOP8
2
- 24 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Die Size
(µm)
3
651x1231
651x1231
AB Sensors
General Characteristics:
Parameter
Input Voltage Range
Operating Frequency
Operating Temperature Range
Bridge Electrical Offset
Signal Output at Max. Field
Nonlinearity
Hysteresis
TCR
TCOI
TCOV
Off Axis Characteristic
ESD Tolerance
Min
4
<1
DC
-50
-4
Typical
Max
4
±12.5
>1
125
+4
120
2
4
+0.14
+0.03
-0.1
7
Cos β
400
Unit
Volts
MHz
°C
mV/V
mV/V
5
% (unipolar)
5
% (unipolar)
6
% / °C
6
% / °C
6
% / °C
V pin-to-pin HBM
Notes:
1.
1 Oersted (Oe) = 1 Gauss in air.
2.
See the Appendix for package dimensions and tolerances.
3.
Sensors can be provided in die form by special request.
4.
GMR AB-Series sensors are pure ratiometric devices, meaning that they will operate properly at extremely low supply
voltages. The output signal will be proportional to the supply voltage. Maximum voltage range is limited by the power
dissipation in the package and the maximum operating temperature of the sensor.
5.
Unipolar operation means exposure to magnetic fields of one polarity, e.g., 0 to 30 Gauss, or -2 to -50 Gauss, but not -20
to +30 Gauss (bipolar operation). Bipolar operation will increase nonlinearity and hysteresis.
6.
TCR is resistance change with temperature with no applied field. TCOI is the output change with temperature using a
constant current source to power the sensor. TCOV is the output change with temperature using a constant voltage source
to power the sensor.
Beta (β) is any angle deviation from the sensitive axis.
Typical Gradiometer Transfer Function
50
Differential Voltage Out of Sensor (mV)
7.
40
30
20
Increasing field
on X resistors
10
0
-400Increasing -200
field
on Y resistors
-10
0
200
-20
400
The Figure at left is a
simulated output from an
NVE Gradiometer. The
output / gradient
correlation shown
assumes one pair of
resistors is held at zero
field. Note the bipolar
output.
-30
-40
-50
Magnetic Field Applied to Resistors
- 25 www.nve.com phone: 952-829-9217 fax: 952-829-9189
ABH Sensors
ABH Sensors
Features:
•
•
•
•
•
•
•
Extremely High Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Temperature Tolerance to 150°C Continuous
Wide Linear Range of Operation
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
Small, Low-Profile Surface Mount Packages
Applications:
•
•
•
General Differential Field Sensing
Gear Tooth and Encoder Speed and Position Sensing
Low Voltage, High Temperature Applications
Description:
The ABH-Series GMR sensors are low field, high temperature gradiometers for use in a wide variety
of applications. Two pairs of unshielded GMR sensor elements provide for directional sensing of small
gradients in large and small magnetic fields. The ability to detect only magnetic gradients allows low
sensitivity to external sources of uniform magnetic field allowing these sensors to work successfully in
high magnetic noise environments such as near electric motors or current carrying wires.
Functional Block diagram
Pinout
V+ (supply)
OUT B
pin 8, V+(supply)
GMR
NVE
ABxxx-02
X
Y
X
pin 5, OUT B
Y
X
Y
pin 1, OUT A
Pin 1
OUT A
pin 4, V(ground)
V- (ground)
Axis of Sensitivity
Magnetic Characteristics:
Part
Number
ABH001-00
Saturation
1
Field (Oe )
70
Linear
Range
1
(|Oe |)
Min
Max
5
40
Resistor
Sensitivity
1
(%R / Oe )
Min
Max
0.06 0.12
Resistance
(Ohms)
Package
1.2K ±20%
MSOP8
2
- 26 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Die Size
(µm)
3
651x1231
ABH Sensors
General Characteristics:
Parameter
Input Voltage Range
Operating Frequency
Operating Temperature Range
Bridge Electrical Offset
Signal Output at Max. Field
Nonlinearity
Hysteresis
TCR
TCOI
TCOV
Off Axis Characteristic
ESD Tolerance
Min
4
<1
DC
-50
-4
Typical
Max
4
±6
>1
150
+4
80
4
15
+0.11
+0.10
0.0
7
Cos β
400
Unit
Volts
MHz
°C
mV/V
mV/V
5
% (unipolar)
5
% (unipolar)
6
% / °C
6
% / °C
6
% / °C
V pin-to-pin HBM
Notes:
1.
1 Oersted (Oe) = 1 Gauss in air.
2.
See the Appendix for package dimensions and tolerances.
3.
Sensors can be provided in die form by special request.
4.
GMR AB-Series sensors are pure ratiometric devices meaning that they will operate properly at extremely low supply
voltages. The output signal will be proportional to the supply voltage. Maximum voltage range is limited by the power
dissipation in the package and the maximum operating temperature of the sensor.
5.
Unipolar operation means exposure to magnetic fields of one polarity, e.g., 0 to 30 Gauss, or -2 to -50 Gauss, but not -20 to
+30 Gauss (bipolar operation). Bipolar operation will increase nonlinearity and hysteresis.
6.
TCR is resistance change with temperature with no applied field. TCOI is the output change with temperature, using a
constant current source to run the sensor. TCOV is the output change with temperature, using a constant voltage source to
run the sensor.
Beta (β) is any angle deviation from the sensitive axis.
Typical Gradiometer Transfer Function
50
Differential Voltage Out of Sensor (mV)
7.
40
30
20
Increasing field
on X resistors
10
0
-400Increasing -200
field
on Y resistors
-10
0
200
-20
400
The Figure at left is a
simulated output from an
NVE Gradiometer. The
output / gradient
correlation shown
assumes one pair of
resistors is held at zero
field. Note the bipolar
output.
-30
-40
-50
Magnetic Field Applied to Resistors
- 27 www.nve.com phone: 952-829-9217 fax: 952-829-9189
Similar pages