ACE ACE51515BNA+H Low noise, fast response 300ma ldo regulator Datasheet

ACE515
Low Noise, fast response 300mA LDO regulator
Description
ACE515 series is a group of positive voltage output, low power consumption, low dropout voltage
regulator.
ACE515 can provide output value in the range of 1.0V~4.5V every 0.1V step. It also can be customized
on command.
ACE515 includes high accuracy voltage reference, error amplifier, current limit circuit and output driver
module with discharge capability.
ACE515 has excellent load and line transient response and good temperature characteristics, which can
assure the stability of chip and power system. And it uses trimming technique to guarantee output voltage
accuracy within ±2%.
Features











Low Power Consumption: 25uA (Typ)
Low Output Noise (47uVRMS)
Standby Mode: 0.1uA
Low Dropout Voltage 0.16V@300mA (Typ.)
High Ripple Rejection: 73dB @100Hz (Typ.)
Low Temperature Coefficient: ±100ppm/℃
Excellent Line Regulation: 0.05%/V
Build-in Chip Enable And Discharge Circuit
Output Voltage Range: 1.0V~4.5V (customized on command every 0.1V step)
High Accurate: ±2%
Output Current Limit
Application





Power source for cellular phones and various kind of PCSs
Battery Powered equipment
Power Management of MP3, PDA, DSC, Mouse, PS2 games
Reference voltage source
Regulation after switching power
Typical Performance Characteristic:
Load Regulation (Vout=4.5V)
VER 1.5
1
ACE515
Low Noise, fast response 300mA LDO regulator
Absolute Maximum Ratings
Parameter
Symbol
Max
Unit
Max Input voltage
Power Dissipation
SOT-23-5
SC-70-5
Junction temperature
VIN
8
V
mW
TJ
250
250
125
Storage temperature
TS
Output Current
- 45 to 150
300
Ambient Temperature
TA
-40 to 85
O
C
O
C
mA
O
C
Note:
Exceed these limits to damage to the device.
Exposure to absolute maximum rating conditions may affect device reliability.
Packaging Type
SOT-23-5
SC-70-5
5
1
SC-70-5 SOT-23-5(A) SOT-23-5(B) Description
4
2
3
Function
5
5
1
Vout
Output pin
1
1
3
VDD
Input pin
2
2
2
GND
Ground pin
3
3
4
CE
Chip Enable pin
4
4
5
NC
No Connection
Ordering information
ACE515 XX XX + H
Halogen - free
Pb - free
HN: SC-70-5
BNA: SOT-23-5
BNB: SOT-23-5
Output Voltage:1.2V/1.5V/2.8V…..4.5V
VER 1.5
2
ACE515
Low Noise, fast response 300mA LDO regulator
Block Diagram
Recommended Work Conditions
Item
Min Max Unit
Input Voltage Range
2
6
V
Ambient Temperature
-40
85
℃
Electrical Characteristics
ACE515 for arbitrary output voltage (Test Conditions: Cin=1uF, Cout=1uF,TA=25℃, unless otherwise specified.)
Parameter
Symbol
Input Voltage
VIN
VOUT>1.5V
Output Voltage
VOUT<=1.5V
Maximum Output
Current
IOUT(Max.)
Dropout Voltage, VOUT
≧2.8V
Vdrop1
Line Regulation
Load Regulation
Supply Current
Supply Current
(Standby)
Output Voltage
Temperature
Coefficient
Conditions
Min
Typ
2
VIN=Set VOUT+1V
1mA≦Iout≦30mA
VOUT
x0.98
VOUT –
0.03
VIN -VOUT=1V
300
VOUT1
VOUT1
Max
Units
6
V
VOUT x
1.02
VOUT +
0.03
V
mA
IOUT=100mA
50
80
mV
160
220
mV
ΔVOUT /
ΔVIN•VOUT
ΔVOUT /
ΔIOUT
IOUT=300mA
IOUT=40mA
2.8V≦VIN≦6V
VIN=Set VOUT+1V
1mA≦IOUT≦300mA
0.05
0.2
%/V
60
100
mV
Iss
VIN=Set VOUT+1V
25
50
uA
Istandby
VIN=Set VOUT+1V Vce=GND
0.1
1.0
uA
ΔVOUT /
ΔT•VOUT
IOUT=30mA
±100
ppm/
℃
VER 1.5
3
ACE515
Low Noise, fast response 300mA LDO regulator
Ripple Rejection
PSRR
Short Current Limit
IIim
F=100Hz, Ripple=0.5Vp-p
VIN=Set VOUT+1V
VOUT=0V
CE Pull down
Resistance
CE Input Voltage “H”
Rpd
2.0
Vceh
CE Input Voltage “L”
Vcel
Output Noise
En
70
dB
500
mA
10.0
mΩ
1.5
VIN
V
0
0.25
V
BW=10Hz~100kHz
5.0
47
uVrms
Note: Vdrop=Vin 1-(Vout2*0.98) Vout2 is the output voltage when Vin=Vout1+1.0V and Iout=300mA.
Vin is the input voltage at which the output voltage becomes 98% of Vout1 after gradually decreasing the input voltage.
Typical Application Circuit
ACE515
Note Input capacitor (Cin=1uF) and Output capacitor (Cout=1uF) are recommended in all application circuit.
Explanation:
ACE515 series is a group of positive voltage output, low noise, low power consumption, low dropout
voltage regulator.
ACE515 can provide output value in the range of 1.0V~4.5V every 0.1V step. It also can be
customized on command.
ACE515 includes high accuracy voltage reference, error amplifier, current limit circuit and output driver
module.
ACE515 has excellent load and line transient response and good temperature characteristics, which can
assure the stability of chip and power system. And it uses trimming technique to guarantee output voltage
accuracy within ±2%.
VER 1.5
4
ACE515
Low Noise, fast response 300mA LDO regulator
Typical Performance Characteristics
1.Output Voltage vs. Output Current
(with output short protection)
Current limit vs. Vout
2.Output Voltage vs. Input Voltage
Lin Regulation
VIN(V)
Iload (mA)
3.Dropout Voltage vs. Output Current
Dropout & Iout
Iout (mA)
4.Ripple rejection vs. Frequency
PSRR
Freq (kHz)
VER 1.5
5
ACE515
Low Noise, fast response 300mA LDO regulator
5.Line transient response
Cin=Cout=1uF
Iout=25mA
Vout=3.3V
6.Line transient response
Cin=Cout=1uF
Vin=4.5V
7.Startup up from EN
Vout=3.3V
8.Shutdown from EN
VER 1.5
6
ACE515
Low Noise, fast response 300mA LDO regulator
Packing Information
SC-70-5
SOT-23-5
VER 1.5
7
ACE515
Low Noise, fast response 300mA LDO regulator
Notes
ACE does not assume any responsibility for use as critical components in life support devices or systems
without the express written approval of the president and general counsel of ACE Electronics Co., LTD.
As sued herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and shoes failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
ACE Technology Co., LTD.
http://www.ace-ele.com/
VER 1.5
8
Similar pages