Abracon ACHL-25.000KHZ-ER 3.3vdc â ¢ hcmos/ ttl compatible full-size and half-size dip Datasheet

3.3Vdc • HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP
CRYSTAL CLOCK OSCILLATORS
ACOL and ACHL
20.2 x 12.6 x 5.08 mm
FEATURES:
• Tristate Enable / Disable option.
• HCMOS and TTL compatible.
• Low power
• Low voltage 3.3Vdc.
• Tight symmetry option.
APPLICATIONS:
• Clock signal sources for digital chips and microprocessors.
• Low power applications.
STANDARD SPECIFICATIONS
PARAMETERS
SPECIFICATIONS
STANDARD SPECIACOL
FIC(14
ADIP)
TIand
ON
S
Package Type
ACHL (8 DIP)
Frequency Range
(Fo)
Operating Temperature
(TOPR)
Storage Temperature
(TSTO)
Frequency Stability
(DF/ Fo)
Supply Voltage
(Vdd)
Input Current
(I dd)
32.768 k Hz - 200 MHz
0°C to +70°C (See Options)
-55°C to +125°C
±100ppm max. (See Options)
3.3Vdc ±10%
_ 20 MHz
20m A max. for F <
_ 70 MHz
25m A max. for F <
_ 200 MHz
50m A max. for F <
ACOL
(14 DIP)
Dimensions: Inches (mm)
Duty Cycle or Symmetry
40 / 60% max. (typical 45 / 55%) (See Options)
Rise and Fall Times
(TR / TF)
10ns max.
Output Load
5TTL or 15pF
Output Voltage
0.9*Vdd min. (VOH) ; 0.1*Vdd max. (VOL)
Start-up Time
(TOSC)
10ms max.
>
_ 2.2V
Tristate Function
(VIH) “1” or Open: Oscillation
(Option “-A” ONLY)
(VIL) “0”:Output disabled in high impedance (Hi Z) < 0.8V
Output Disable / Enable Time
100ns max. (for Option “- A” ONLY)
* Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) opt. A.
Test circuit, waveforms, see appendix B. Recommended handling, see appendix F.
Environmental and mechanical specifications, see appendix C. Group 1.
Marking, see appendix G. Value added, see appendix D.
Application notes, see appendix A.
ORDERING OPTIONS
ORDERING
OPTIONS
ACH L
( 8 DIP)
ACX L - Frequency - Temperature - Overall Frequency Stability - Duty Cycle - Tristate - Value Added - Packaging
-G Gull Wing*
O or H
-T for Tape and reel
-Y for ± 10 ppm max** -S for 45 / 55% @ 1/ 2 Vdd
-G2 Gull Wing * (ACHL Only) -TY for Tray packing
-J for ± 20 ppm max
1/ 2 Vdd
@
-T
for
47.5
/
52.5%
XX.XXXXX MHz or kHz
-QXX (Trimmed Leads) *
-R for ± 25 ppm max
-S1 for 45 / 55% @ 1.4 Vdc
PIN # PIN #
-K for ± 30 ppm max
FUNCTION
-D for -10°C to + 60°C
ACOL ACHL
-H for ± 35 ppm max
A
for
Tristate
E
/
D
-E for -20°C to + 70°C
1
1
NC or E/D
-F for -30°C to + 70°C -C for ± 50 ppm max
7
4
GND
/ Case
** Standard Operating
-N for -30°C to + 85°C
8
5
Output
Temperature
Only
-L for -40°C to + 85°C
Frequency 50 MHz max
14
8
Vdd
ABRACON
52
®
C O R P O R AT I O N
NOTE: Left blank if standard • All specifications and markings subject to change without notice
29 Journey • Aliso Viejo, CA 92656 • USA
(949) 448-7070 •
F AX : (949) 448-8484
E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
Similar pages