AVAGO ACPL-824-W00E Multi-channel full-pitch phototransistor optocoupler Datasheet

ACPL-8x4
Multi-Channel Full-Pitch Phototransistor Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The ACPL-824 is an AC-input dual channel full-pitch
phototransistor optocoupler which contains four light
emitting diode optically coupled to two separate
phototransistor. It is packaged in a 8-pin DIP package.
• Current transfer ratio
(CTR: min. 20% at IF = ±1mA, VCE = 5V)
Likewise, the ACPL-844 is an AC-input quad channel fullpitch phototransistor optocoupler which contains eight
light emitting diode optically coupled to four separate
phototransistor. It is packaged in a 16-pin DIP package
For both types, it is also available in wide-lead spacing
option and lead bend SMD option with input-output
isolation voltage at 5000 Vrms. Response time, tr, is typically
4 µs and CTR is 20% to 300%.
7
6
• Response time
(tr: typ. 4µs at VCE = 2V, IC = 2mA, RL= 100W)
• Compact dual-in-line package
• Safety and regulatory approvals
- CSA
- UL 1577
- IEC/EN/DIN EN 60747-5-2
ACPL-824 pin layout
8
• High input-output isolation voltage
(VISO = 5,000VRMS)
• Options available:
5
– Leads with 0.4” (10.16 mm) spacing (W00)
– Lead bend for surface mounting (300)
– Tape and reel for SMD (500) – (ACPL-824 only)
1
•
•
•
•
2
3
– IEC/EN/DIN EN 60747-5-2 approved (060)
4
Pin 1, 3
Pin 2, 4
Pin 5, 7
Pin 6, 8
Anode or Cathode
Cathode or Anode
Emitter
Collector
•
•
•
•
3
4
5
• I/O Interface for Programmable controllers, computers
• System appliances, measuring instruments
16 15 14 13 12 11 10 9
2
Applications
• Sequence controllers
ACPL-844 pin layout
1
– Lead-Free (000E)
6
Pin 1, 3, 5, 7
Pin 2, 4, 6, 8
Pin 9,11,13,15
Pin 10,12,14,16
7
8
Anode or Cathode
Cathode or Anode
Emitter
Collector
• Signal transmission between circuits of different
potentials and impedances.
Ordering Information
ACPL-8x4 is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance
Notice #5, File CA 88324.
RoHS Compliant
Option
Part number
ACPL-824
ACPL-844
Rank ‘0’
20%<CTR<300%
Package
No. of
Channels
-000E
300mil DIP-8
Dual
-300E
300mil DIP-8
x
X
-500E
300mil DIP-8
X
X
-060E
300mil DIP-8
-360E
300mil DIP-8
x
x
-560E
300mil DIP-8
x
X
-W00E
400mil DIP-8
-W60E
400mil DIP-8
-000E
300mil DIP-16
-300E
300mil DIP-16
-060E
300mil DIP-16
-360E
300mil DIP-16
-W00E
400mil DIP-16
-W60E
400mil DIP-16
Surface
Mount
Gull
Wing
Tape
& Reel
IEC/EN/DIN EN
60747-5-2 Quantity
50 pcs per tube
50 pcs per tube
X
X
1000 pcs per reel
X
50 pcs per tube
X
50 pcs per tube
X
1000 pcs per reel
50 pcs per tube
X
Quad
50 pcs per tube
25 pcs per tube
x
x
X
X
25 pcs per tube
X
25 pcs per tube
X
25 pcs per tube
25 pcs per tube
X
25 pcs per tube
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ACPL-824-360E to order product of 300mil DIP-8 Dual Channel AC Gull Wing Surface Mount package in Tube packaging
with 20%<CTR<300%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.
Example 2:
ACPL-844-W00E to order product of 400mil DIP-16 Quad Channel AC package in Tube packaging with 20%<CTR<300%
and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Package Outline Drawings
ACPL-824 Package Outline
DATE CODE
LEAD FREE
PIN ONE DOT
A 824
YYWW
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-824 Package Outline – Option 060
DATE CODE
LEAD FREE
PIN ONE DOT
A 824 V
YYWW
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
DIMENSIONS IN [MILLIMETERS] AND INCHES
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
ACPL-824 Package Outline – Option W00
DATE CODE
LEAD FREE
PIN ONE DOT
A 824
YYWW
6.50
0.256
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
6.90 ±0.50
0.272 ±0.020
2.30 ±0.50
0.09 ±0.02
0.26
0.01
10.16 ±0.50
0.40 ±0.02
0.50 ±0.10
0.02 ±0.00
2.54 ±0.25
0.10 ±0.01
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-824 Package Outline – Option 300
DATE CODE
LEAD FREE
PIN ONE DOT
A 824
YYWW
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±12.70
0.138 ±0.500
1.20 ±0.10
0.047 ±0.004
2.54 ±0.25
0.10 ±0.01
0.35 ±0.25
0.014 ±0.010
0.26
0.01
1 ±0.25
0.039 ±0.010
10.16 ±0.50
0.40 ±0.02
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-844 Package Outline
DATE CODE
LEAD FREE
PIN ONE DOT
A 844
YYWW
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
DIMENSIONS IN [MILLIMETERS] AND INCHES
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
ACPL-844 Package Outline - Option 060
LEAD FREE
DATE CODE
A 844 V
YYWW
PIN ONE DOT
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-844 Package Outline - Option W00
DATE CODE
LEAD FREE
PIN ONE DOT
A 844
YYWW
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
6.90 ±0.50
0.272 ±0.020
2.80 ±0.50
0.11 ±0.02
10.16 ±0.50
0.40 ±0.02
0.50 ±0.10
0.02 ±0.00
2.54 ±0.25
0.10 ±0.01
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-844 Package Outline - Option 300
LEAD FREE
PIN ONE DOT
DATE CODE
A 844
YYWW
6.50 ±0.50
0.256 ±0.020
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
1.20 ±0.10
0.05 ±0.00
2.54 ±0.25
0.10 ±0.01
DIMENSIONS IN [MILLIMETERS] AND INCHES
0.35 ±0.25
0.01 ±0.01
1 ±0.25
0.039 ±0.010
10.16 ±0.30
0.40 ±0.01
0.26
0.01
Solder Reflow Temperature Profile
30 seconds
1. One-time soldering reflow is recommended within the
condition of temperature and time profile shown at
right.
2. When using another soldering method such as infrared
ray lamp, the temperature may rise partially in the mold
of the device. Keep the temperature on the package of
the device within the condition of (1) above.
Note: Non-halide flux should be used
250°C
260 °C (Peak Temperature)
Temperature (°C)
217°C
200°C
150°C
60 sec
25°C
60 ~ 150 sec
90 sec
60 sec
Time (sec)
Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Units
Storage Temperature
TS
-55
125
°C
Operating Temperature
TA
-30
100
°C
Average Forward Current
IF(AVG)
-
±50
mA
Input Power Dissipation
PI
-
70
mW
Collector Current
IC
-
50
mA
Collector-Emitter Voltage
VCEO
-
70
V
Emitter-Collector Voltage
VECO
-
6
V
Isolation Voltage (AC for 1min, R.H. 40~60%)
VISO
-
5000
VRMS
Collector Power Dissipation
PC
-
150
mW
Total Power Dissipation
PTOT
-
200
mW
Lead Solder Temperature
260°C for 10 sec., 1.6 mm below seating plane
Note
Electrical Specifications (DC)
Over recommended operating conditions unless otherwise specified.
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Note
Forward Voltage
VF
-
1.2
1.4
V
IF = ±20mA
Terminal Capacitance
Ct
50
250
pF
V = 0, f = 1KHz
Collector Dark Current
ICEO
-
100
nA
VCE = 20V, IF = 0 mA
Collector-Emitter Breakdown Voltage
BVCEO
70
-
-
V
IC = 0.1 mA, IF = 0 mA
Emitter-Collector Breakdown Voltage
BVECO
6
-
-
V
IE = 10 mA, IF = 0 mA
Collector Current
IC
0.2
-
3
mA
IF = ±1mA, VCE = 5V
Current Transfer Ratio
CTR
20
-
300
%
Collector-Emitter Saturation Voltage
VCE(sat)
-
0.1
0.2
Isolation Resistance
RISO
1x1011
-
V
W
IF = ± 20 mA, IC = 1mA
5x1010
Floating Capacitance
CF
-
0.6
1
pF
V = 0, f = 1MHz
Cut-off Frequency (-3dB)
FC
15
80
-
KHz
VCE = 5V, IC = 2 mA, RL = 100W
See fig 13
Response Time (Rise)
tr
-
4
18
ms
VCE = 2V, IC = 2 mA, RL = 100W
See fig 12
Response Time (Fall)
tf
-
3
18
ms
CTR=(IC/IF )* 100%
DC500V, R.H. 40~60%
200
Collector power dissipation Pc (mW)
60
Forward current I (mA)
50
40
30
20
10
0
-30
0
25
50
75
100
125
150
100
50
0
-30
0
5
4
2
1
200
o
25 C
0C
-25 C
o
o
100
o
50
20
10
5
2
0
2.5
5.0
7.5
1
10.0 12.5 15.0
0
0.5
140
15
20
25
30
Figure 4. Forward Current vs. Forward Voltage
50
V =5V
Ta=25 C
o
o
100
80
60
40
20
Ta=25 C
I F=30mA
Collector current Ic (mA)
120
10
Forward voltage VF (V)
Figure 3. Collector-emitter Saturation Voltage vs. Forward Current
Current transfer ratio CTR (%)
125
o
Ta=75 C
50 C
Forward current IF (mA)
40
20mA
30
Pc(MAX.)
10mA
20
5mA
10
1mA
0
0.1 0.2 0.5 1
2
5 10 20
50 100
Forward current I F (mA)
Figure 5. Current Transfer Ratio vs. Forward Current
100
500
O
Ta=25 C
3
0
75
Figure 2. Collector Power Dissipation vs. Ambient Temperature
Forward current I F (mA)
Collector-emitter saturation voltage
V (sat) (V)
Ic=0.5mA
1mA
3mA
5mA
7mA
50
Ambient temperature Ta ( C)
Figure 1. Forward Current vs. Ambient Temperature.
6
25
o
o
Ambient temperature Ta ( C)
0
0
1
2
3
4
5
6
7
8
9 10
Collector-emitter voltage V (V)
Figure 6. Collector Current vs. Collector-emitter Voltage.
0.10
IF =1mA
VCE =5V
Collector-emitter saturation voltage
V (sat) (V)
Relative current transfer ratio (%)
150
100
50
0
-30
0
25
50
75
0.08
0.06
0.04
0.02
0
-30
100
o
10
-8
10
-9
10
-10
10
-11
10
-12
100
50
V CE=2V
Ic=2mA
Ta=25 C
o
20
60
80
tf
5
td
2
ts
1
0.5
0.2
-30
0
20
40
60
80
0.1
100
Ambient Temperature Ta ( C)
V =2V
Ic=2mA
o
Ta=25 C
0
0.1 0.2
0.5
1
2
5
10
Load resistance R L(k )
Figure 9. Collector Dark Current vs. Ambient Temperature
Figure 10. Response Time vs. Load Resistance
Vcc
Input
RD
RL
Input
Output
Output
10%
90%
td
R =10k
L
-10
100
1k
ts
tr
tf
Figure 12. Test Circuit for Response Time
Vcc
-20
RD
0.2
0.5 1 2 5 10
100
RL
1000
Frequency f (kHz)
Figure 11. Frequency Response
Figure 13. Test Circuit for Frequency Response
100
tr
10
o
Voltage gain Av (dB)
40
Figure 8. Collector-emitter Saturation Voltage vs. Ambient Temperature
Response time ( s)
(A)
Collector Dark Current I
10
-7
20
Ambient temperature Ta ( C)
Figure 7. Relative Current Transfer Ratio vs. Ambient Temperature
-6
0
o
Ambient temperature Ta ( C)
10
IF=20mA
Ic=1mA
Output
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited. in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved.
AV01-0475EN - May 22, 2007
Similar pages