AVAGO ACPL-847-W60E Multi-channel full-pitch phototransistor optocoupler sequence controller Datasheet

ACPL-8x7
Multi-Channel Full-Pitch Phototransistor Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The ACPL-827 is a DC-input dual channel full-pitch
phototransistor optocoupler which contains two light
emitting diode optically coupled to two separate
transistor. It is packaged in a 8-pin DIP package.
• Current transfer ratio
(CTR: min. 50% at IF = 5mA, VCE = 5V)
• High input-output isolation voltage
(VISO = 5,000VRMS)
• Response time
(tr: typ. 4µs at VCE = 2V, IC = 2mA, RL= 100W)
• Compact dual-in-line package
• Safety and regulatory approvals
- CSA
- UL 1577
- IEC/EN/DIN EN 60747-5-2
• Options available:
– Leads with 0.4” (10.16 mm) spacing (W00)
– Lead bend for surface mounting (300)
– Tape and reel for SMD (500) – available only for
ACPL-827
– IEC/EN/DIN EN 60747-5-2 approved (060)
– Lead-Free (000E)
Likewise, the ACPL-847 is a DC-input quad channel fullpitch phototransistor optocoupler which contains four
light emitting diode optically coupled to four separate
transistor. It is packaged in a 16-pin DIP package
For both types, it is also available in wide-lead spacing
option and lead bend SMD option with input-output
isolation voltage at 5000 Vrms. Response time, tr, is
typically 4 μs and minimum CTR is 50% at input current
of 5 mA
ACPL-827 pin layout
•
•
•
•
8
7
6
5
1
2
3
4
Pin 1, 3
Pin 2, 4
Pin 5, 7
Pin 6, 8
Applications
Anode
Cathode
Emitter
Collector
ACPL-847 pin layout
•
•
•
•
1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
Pin 1, 3, 5, 7
Pin 2, 4, 6, 8
Pin 9,11,13,15
Pin 10,12,14,16
Anode
Cathode
Emitter
Collector
• I/O Interface for Programmable controllers,
computers.
• Sequence controllers
• System appliances, measuring instruments
• Signal transmission between circuits of different
potentials and impedances.
Ordering Information
ACPL-8x7 is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component
Acceptance Notice #5, File CA 88324.
RoHS Compliant Option
Part
number
ACPL-827
ACPL-847
Rank ‘0’
50%
<CTR<
600%
Rank ‘B’
130%
<CTR<
260%
Rank ‘C’
200%
<CTR<
400%
Rank ‘G’
130%
<CTR<
400%
-000E
-00BE
-00CE
300mil DIP-8
-300E
-30BE
-30CE
-500E
-50BE
-060E
-06BE
-360E
-560E
Surface
Mount
Gull
Wing
300mil DIP-8
x
X
-50CE
300mil DIP-8
X
X
-06CE
300mil DIP-8
-36BE
-36CE
300mil DIP-8
-56BE
-56CE
300mil DIP-8
-W00E
-W0BE
-W0CE
400mil DIP-8
-W60E
-W6BE
-W6CE
400mil DIP-8
Package
-000E
-00GE
300mil DIP-16
-300E
-30GE
300mil DIP-16
-060E
-06GE
300mil DIP-16
-360E
-36GE
300mil DIP-16
-W00E
-W0GE
400mil DIP-16
-W60E
-W6GE
400mil DIP-16
No. of
Channels
Tape &
Reel
IEC/EN/
DIN EN
60747-5-2
Quantity
50 pcs per tube
Dual
x
X
x
X
50 pcs per tube
X
X
1000 pcs per reel
X
50 pcs per tube
X
50 pcs per tube
X
1000 pcs per reel
50 pcs per tube
X
50 pcs per tube
25 pcs per tube
Quad
X
X
X
X
25 pcs per tube
X
25 pcs per tube
X
25 pcs per tube
25 pcs per tube
X
25 pcs per tube
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ACPL-827-36GE to order product of 300mil DIP-8 Dual Channel DC Gull Wing Surface Mount package in Tube
packaging with 130%<CTR<400%, IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
ACPL-847-W00E to order product of 400mil DIP-16 Quad Channel DC package in Tube packaging with
50%<CTR<600% and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
2
Package Outline Drawings
ACPL-827 Package Outline
DATE CODE
LEAD FREE
PIN ONE DOT
A 827
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-827 Package Outline – Option 060
DATE CODE
LEAD FREE
PIN ONE DOT
A 827 V
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
DIMENSIONS IN [MILLIMETERS] AND INCHES
3
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
ACPL-827 Package Outline – Option W00
DATE CODE
LEAD FREE
PIN ONE DOT
A 827
YYWW
6.50
0.256
RANK
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
6.90 ±0.50
0.272 ±0.020
2.30 ±0.50
0.09 ±0.02
2.54 ±0.25
0.10 ±0.01
0.26
0.01
10.16 ±0.50
0.40 ±0.02
0.50 ±0.10
0.02 ±0.00
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-827 Package Outline – Option 300
DATE CODE
LEAD FREE
PIN ONE DOT
A 827
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
9.68 ±0.50
0.381 ±0.020
3.50 ±12.70
0.138 ±0.500
0.35 ±0.25
0.014 ±0.010
1.20 ±0.10
0.047 ±0.004
2.54 ±0.25
0.10 ±0.01
DIMENSIONS IN [MILLIMETERS] AND INCHES
4
0.26
0.01
1 ±0.25
0.039 ±0.010
10.16 ±0.50
0.40 ±0.02
ACPL-847 Package Outline
DATE CODE
LEAD FREE
PIN ONE DOT
A 847
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-847 Package Outline - Option 060
DATE CODE
LEAD FREE
PIN ONE DOT
A 847 V
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
2.80 ±0.50
0.11 ±0.02
3.30 ±0.50
0.130 ±0.020
2.54 ±0.25
0.10 ±0.01
0.50 ±0.10
0.02 ±0.00
DIMENSIONS IN [MILLIMETERS] AND INCHES
5
0.50
0.02
TYP
0.26
0.01
[7.62 - 9.98]
0.3 - 0.39
ACPL-847 Package Outline - Option W00
DATE CODE
LEAD FREE
PIN ONE DOT
A 847
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
6.90 ±0.50
0.272 ±0.020
2.80 ±0.50
0.11 ±0.02
10.16 ±0.50
0.40 ±0.02
0.50 ±0.10
0.02 ±0.00
2.54 ±0.25
0.10 ±0.01
DIMENSIONS IN [MILLIMETERS] AND INCHES
ACPL-847 Package Outline - Option 300
LEAD FREE
PIN ONE DOT
DATE CODE
A 847
YYWW
6.50 ±0.50
0.256 ±0.020
RANK
7.62 ±0.30
0.30 ±0.01
19.84 ±0.50
0.781 ±0.020
3.50 ±0.50
0.138 ±0.020
1.20 ±0.10
0.05 ±0.00
2.54 ±0.25
0.10 ±0.01
1 ±0.25
0.039 ±0.010
0.35 ±0.25
0.01 ±0.01
0.26
0.01
10.16 ±0.30
0.40 ±0.01
DIMENSIONS IN [MILLIMETERS] AND INCHES
Solder Reflow Temperature Profile
Note: Non-halide flux should be used.
30 seconds
250°C
Temperature (°C)
1. One-time soldering reflow is recommended within
the condition of temperature and time profile shown
at right.
2. When using another soldering method such as
infrared ray lamp, the temperature may rise partially
in the mold of the device. Keep the temperature on
the package of the device within the condition of (1)
above.
217°C
200°C
150°C
60 sec
25°C
60 ~ 150 sec
90 sec
Time (sec)
6
260 °C (Peak Temperature)
60 sec
Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Units
Storage Temperature
TS
-55
125
°C
Operating Temperature
TA
-30
100
°C
Average Forward Current
IF(AVG)
-
50
mA
Input Power Dissipation
PI
-
70
mW
Input Reverse Voltage
VR
-
6
V
Collector Current
IC
-
50
mA
Collector-Emitter Voltage
VCEO
-
70
V
Emitter-Collector Voltage
VECO
-
6
V
Isolation Voltage (AC for 1min, R.H. 40~60%)
VISO
-
5000
VRMS
Collector Power Dissipation
PC
-
150
mW
Total Power Dissipation
PTOT
-
200
mW
Lead Solder Temperature
260°C for 10 sec., 1.6 mm below seating plane
Note
Electrical Specifications (DC)
Over recommended operating conditions unless otherwise specified.
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Forward Voltage
VF
-
1.2
1.4
V
IF = 20mA
Reverse Current
IR
-
-
10
mA
VR = 4V
Terminal Capacitance
Ct
30
250
pF
V = 0, f = 1KHz
Collector Dark Current
ICEO
-
100
nA
VCE = 20V, IF = 0 mA
Collector-Emitter
Breakdown Voltage
BVCEO
70
-
-
V
IC = 0.1 mA,
IF = 0 mA
Emitter-Collector
Breakdown Voltage
BVECO
6
-
-
V
IE = 10 mA,
IF = 0 mA
Collector Current
IC
2.5
-
30
mA
Current Transfer Ratio
CTR
50
-
600
%
IF = 5 mA,
VCE = 5V
Collector-Emitter
Saturation Voltage
VCE(sat)
-
0.1
0.2
V
IF = 20 mA,
IC = 1mA
Isolation Resistance
RISO
5x1010
1x1011
-
W
DC500V, R.H. 40~60%
Floating Capacitance
CF
-
0.6
1
pF
V = 0, f = 1MHz
Cut-off Frequency (-3dB)
FC
-
80
-
KHz
VCE = 5V, IC = 2 mA,
RL = 100W
See fig 13
Response Time (Rise)
tr
-
4
18
ms
See fig 12
Response Time (Fall)
tf
-
3
18
ms
VCE = 2V, IC = 2 mA,
RL = 100W
7
Note
CTR=(IC/IF )* 100%
60
200
Collector Power dissipation Pc (mW)
Forward current IF (mA)
50
40
30
20
10
0
-30
0
25
50
75
100
125
150
100
50
0
-30
0
o
Ambient temperature Ta ( C)
7mA
1mA
3mA
5mA
O
1
Ta=75 C
50 C
200
o
o
100
o
50
20
10
5
2
0
5
1
15
10
0
200
30
o
160
Collector current Ic (mA)
120
100
80
60
40
20
2
5
10
2.0
20
Forward current I F(mA)
Figure 5. Current Transfer Ratio vs. Forward Current
I F=30mA
2.5
3.0
50
o
Ta=25 C
20mA
25
140
1
1.5
Figure 4. Forward Current vs. Forward Voltage
V CE=5V
Ta=25 C
180
1.0
0.5
Forward voltage VF (V)
Figure 3. Collector-emitter Saturation Voltage vs. Forward Current
Current transfer ratio CTR (%)
25 C
0C
-25 C
o
Forward current I F(mA)
8
125
o
2
0
100
500
Ta=25 C
3
0
75
Figure 2 Collector Power Dissipation vs. Ambient Temperature
Forward current I F(mA)
4
Ic=0.5mA
Collecotr-emitter saturation voltage VCE (sat) (V)
5
50
o
Figure 1. Forward Current vs. Ambient Temperature.
6
25
Ambient temperature Ta ( C)
Pc(MAX.)
20
15
10mA
10
5mA
5
0
0
1
2
3
4
5
6
7
Collector-emitter voltage VCE (V)
Figure 6. Collector Current vs. Collector-emitter Voltage.
8
9
I F =5mA
V CE=5V
100
50
0
0
-30
25
50
75
100
Collector-emitter saturation voltage VCE (sat) (V)
Relative current transfer ratio (%)
150
0.16
I F=20mA
Ic=1mA
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
-25
Ambient temperature Ta ( C)
500
200
100
10
-7
10
Response time (µs)
Collector dark current I CEO (A)
V CE=20V
-8
10
-9
10
-10
10
75
100
VCE =2V
Ic=2mA
Ta=25 C
o
50
tr
20
10
td
tf
5
ts
2
1
0.5
-11
10
-25
0
25
50
75
0.2
0.05
100
0.1 0.2
Figure 9. Collector Dark Current vs. Ambient Temperature
1
2
5
10
Figure 10. Response Time vs. Load Resistance
VCE =2V
Ic=2mA
Ta=25 C
0
0.5
Load resistance R L(kΩ)
o
Ambient temperature Ta ( C)
Voltage gain Av (dB)
50
Figure 8. Collector-emitter Saturation Voltage vs. Ambient Temperature
-5
-6
25
o
Figure 7. Relative Current Transfer Ratio vs. Ambient Temperature
10
0
Ambient temperature Ta ( C)
o
Input
Output
Vcc
o
Input
RD
RL
10%
Output
90%
10
ts
td
R L=10kΩ 1kΩ 100Ω
tr
Figure 12. Test Circuit for Response Time
20
0.5 1
2
5 10 20
50 100
Vcc
500
RD
Frequency f (kHz)
RL
Figure 11. Frequency Response
Figure 13. Test Circuit for Frequency Response
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. Obsoletes AV01-0612EN
AV02-1429EN - December 22, 2008
Output
tf
Similar pages