Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTQ380/380.0/TO39 is a two-port, 180° surface-acoustic-wave (SAW) resonator in a low-profile metal TO-39 case. It provides reliable, fundamental-mode, quartz frequency stabilization i.e. in transmitters or local oscillators operating at 380.000 MHz. 1. Package Dimension (TO-39) 2. Pin Configuration 1 Input / Output 2 Output / Input 3 Case Ground Dimension Data (unit: mm) A 9.30±0.20 B 5.08±0.10 C 3.40±0.20 D 3±0.20 / 5±0.20 E 0.45±0.20 3. Equivalent LC Model and Test Circuit 4. Typical Application Circuits 1) Low-Power Transmitter Application 2) Local Oscillator Application In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5. Typical Frequency Response 6. Temperature Characteristics 7. Performance 7-1.Maximum Ratings Rating Value Unit CW RF Power Dissipation P 10 dBm DC Voltage Between Any Two Pins VDC ±30 V Storage Temperature Range Tstg -40 to +85 °C Operating Temperature Range TA -10 to +60 °C 7-2.Electronic Characteristics Characteristic Centre Frequency (+25 °C Sym Minimum Absolute Frequency fC 379.925 Tolerance from 380.000 MHz ∆fC ±75 IL 6.0 Unloaded Q QU 13,030 50 Ω Loaded Q QL 6,500 Turnover Temperature TO Turnover Frequency fO fc kHz FTC 0.032 ppm/°C2 |fA| ≤10 ppm/yr Insertion Loss Quality Factor Temperature Stability Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year DC Insulation Resistance Between Any Two Pins RF Equivalent RLC Model Typical 25 Maximum Unit 380.075 MHz kHz 7.5 dB 55 °C 1.0 MΩ RM 99.5 Motional Inductance LM 543.3917 Motional Capacitance CM 0.32315 fF 2.0 pF Shunt Static Capacitance CO 1.7 137 Ω Motional Resistance µH 2.3 In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. 7. 8. 9. The frequency fC is the frequency of minimum IL with the resonator in the specified test fixture in a 50 Ω test system with VSWR ≤ 1.2:1. Typically, f OSCILLATOR or fTRANSMITTER is less than the resonator f C. Unless noted otherwise, case temperature T C = +25°C±2°C. Frequency aging is the change in f C with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f 0. The nominal frequency at 2 any case temperature, TC, may be calculated from: f = f 0 [1 - FTC (T 0 - TC) ]. Typically, oscillator T0 is 20° less than the specified resonator T0. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C 0 is the measured static (non-motional) capacitance between either Pin 1 and ground or Pin 2 and ground. The measurement includes case parasitic capacitance. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB bandwidth, fC versus TC, and C0. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04