AD AD7399BR-REEL Quad, serial-input 12-bit/10-bit dac Datasheet

Quad, Serial-Input
12-Bit/10-Bit DACs
AD7398/AD7399
FUNCTIONAL BLOCK DIAGRAM
FEATURES
VDD
VREF B
VREF A
AD7398/AD7399
INPUT
REG A
DAC A
REGISTER
DAC A
VOUTA
DAC B
REGISTER
DAC B
VOUTB
DAC C
REGISTER
DAC C
VOUTC
DAC D
REGISTER
DAC D
VOUTD
SERIAL
REGISTER
CS
INPUT
REG B
SDI
INPUT
REG C
CLK
APPLICATIONS
12/10
Automotive output voltage span
Portable communications
Digitally controlled calibration
PC peripherals
INPUT
REG D
POWER
ON RESET
VSS
RS
LDAC
VREF C
VREF D
02179-001
AD7398—12-bit resolution
AD7399—10-bit resolution
Programmable power shutdown
Single (3 V to 5 V) or dual (±5 V) supply operation
3-wire, serial SPI®-compatible interface
Internal power-on reset
Double buffered registers for simultaneous
multichannel DAC update
Four separate rail-to-rail reference inputs
Thin profile, TSSOP-16 package available
Low tempco: 1.5 ppm/°C
Qualified for automotive applications
GND
Figure 1.
GENERAL DESCRIPTION
A doubled-buffered serial-data interface offers high speed, 3-wire,
SPI- and microcontroller-compatible inputs using serial data-in
(SDI), clock (CLK), and a chip-select (CS). A common levelsensitive, load-DAC strobe (LDAC) input allows simultaneous
update of all DAC outputs from previously loaded input registers.
Additionally, an internal power-on reset forces the output voltage to
zero at system turn on. An external asynchronous reset (RS) also
forces all registers to the zero code state. A programmable powershutdown feature reduces power dissipation on unused DACs.
The AD7398/AD7399 are specified over the extended industrial
(−40°C to +125°C) temperature range. Parts are available in
16-lead, wide body SOIC and ultracompact, thin, 1.1 mm
TSSOP packages.
0.5
VDD = +5V
VSS = –5V
VREF = +2.5V
TA = 25°C
0.4
0.3
0.2
0.1
0
–0.1
–0.2
–0.3
02179-002
The applied external reference, VREF, determines the full-scale
output voltage. Valid VREF values include VSS < VREF < VDD that
result in a wide selection of full-scale outputs. For multiplying
applications, ac inputs can be as large as ±5 VP.
Both parts are offered in the same pinout, enabling users to
select the appropriate resolution for their application without
redesigning the layout. For 8-bit resolution applications, see the
pin-compatible AD7304 product.
DNL (LSB)
The AD7398/AD7399 family of quad, 12-bit/10-bit, voltage
output digital-to-analog converters (DACs) is designed to
operate from a single 3 V to 5 V supply or a dual ±5 V supply.
Built with the Analog Devices, Inc. robust CBCMOS process,
these monolithic DACs offer the user low cost with ease-of-use
in single or dual-supply systems.
–0.4
–0.5
0
512
1024
1536
2048
2560
3072
3584
4096
CODE (Decimal)
Figure 2. AD7398 DNL vs. Code (TA = 25°C)
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2000–2011 Analog Devices, Inc. All rights reserved.
AD7398/AD7399
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ........................................... 10
Applications ....................................................................................... 1
Theory of Operation ...................................................................... 14
Functional Block Diagram .............................................................. 1
DAC Operation .......................................................................... 14
General Description ......................................................................... 1
Operation with VREF Equal to the Supply ................................ 15
Revision History ............................................................................... 2
Power Supply Sequencing ......................................................... 15
Specifications..................................................................................... 3
Programmable Power Shutdown.............................................. 15
AD7398 12-Bit Voltage Output DAC ........................................ 3
Worst Case Accuracy ................................................................. 15
AD7399 10-Bit Voltage Output DAC ........................................ 4
Serial Data Interface ................................................................... 15
Timing Diagrams.......................................................................... 5
Power-On Reset .......................................................................... 16
Absolute Maximum Ratings............................................................ 6
Microprocessor Interfacing ....................................................... 16
ESD Caution .................................................................................. 6
Applications Information .............................................................. 18
Pin Configuration And Function Descriptions ............................ 7
Staircase Windows Comparator ............................................... 18
Input Registers .................................................................................. 8
Programmable DAC Reference Voltage .................................. 19
AD7398 Serial Input Register Data Format .............................. 8
Outline Dimensions ....................................................................... 20
AD7399 Serial Input Register Data Format .............................. 8
Ordering Guide .......................................................................... 21
Terminology ...................................................................................... 9
REVISION HISTORY
1/11—Rev. B to Rev. C
Added Automotive Model and Information .............. Throughout
12/09—Rev. A to Rev. B
Changes to Ordering Guide .......................................................... 21
6/06—Rev. 0 to Rev. A
Updated Format .................................................................. Universal
Changes to Table 1 ............................................................................ 3
Changes to Table 2 ............................................................................ 4
Changes to Ordering Guide .......................................................... 21
11/00—Revision 0: Initial Version
Rev. C | Page 2 of 24
AD7398/AD7399
SPECIFICATIONS
AD7398 12-BIT VOLTAGE OUTPUT DAC
VDD = 5 V, VSS = 0 V; or VDD = +5 V, VSS = −5 V, VREF = +2.5 V, −40°C < TA < +125°C, unless otherwise noted.
Table 1.
Parameter
STATIC PERFORMANCE
Resolution 1
Relative Accuracy2
Differential Nonlinearity2
Zero-Scale Error
Full-Scale Voltage Error
Full-Scale Tempco3
REFERENCE INPUT
VREFIN Range4
Input Resistance5
Input Capacitance3
ANALOG OUTPUT
Output Voltage Range
Output Current
Capacitive Load3
LOGIC INPUTS
Logic Input Low Voltage
Logic Input High Voltage
Input Leakage Current
Input Capacitance3
INTERFACE TIMING3, 7
Clock Frequency
Clock Width High
Clock Width Low
CS to Clock Setup
Clock to CS Hold
Load DAC Pulse Width
Data Setup
Data Hold
Load Setup to CS
Load Hold to CS
AC CHARACTERISTICS
Output Slew Rate
Settling Time8
Shutdown Recovery
DAC Glitch
Digital Feedthrough
Feedthrough
Symbol
3 V to 5 V ± 10%
±5 V ± 10%
Unit
12
±1.5
±1
7
±2.5
1.5
12
±1.5
±1
±2.5
±2.5
1.5
Bits
LSB max
LSB max
mV max
mV max
ppm/°C typ
0/VDD
35
5
VSS/VDD
35
5
V min/max
kΩ typ6
pF typ
0 to VREF
±5
200
0 to VREF
±5
400
V
mA typ
pF max
IIL
CIL
0.5
0.8
80% VDD
2.1 to 2.4
1
10
0.8
4.0
2.4
1
10
V max
V max
V min
V min
μA max
pF max
fCLK
tCH
tCL
tCSS
tCSH
tLDAC
tDS
tDH
tLDS
tLDH
11
45
45
10
20
45
15
10
0
20
16.6
30
30
5
15
30
10
5
0
15
MHz max
ns min
ns min
ns min
ns min
ns min
ns min
ns min
ns min
ns min
2
6
6
150
15
−63
2
6
6
150
15
−63
V/μs typ
μs typ
μs typ
nVs typ
nVs typ
dB typ
N
INL
DNL
VZSE
VFSE
TCVFS
VREF
RREF
CREF
VOUT
IOUT
CL
VIL
VIH
SR
tS
tSDR
Q
QDF
VOUT/VREF
Condition
Monotonic
Data = 000H
Data = FFFH
Data = 555H, worst case
Data = 800H, ΔVOUT = 4 LSBs
No oscillation
VDD = 3 V
VDD = 5 V
CLK only
Data = 000H to FFFH to 000H
To ±0.1% of full scale
Code 7FFH to 800H to 7FFH
VREF = 1.5 VDC 1 V p-p, data = 000H,
f = 100 kHz
Rev. C | Page 3 of 24
AD7398/AD7399
Parameter
SUPPLY CHARACTERISTICS
Shutdown Supply Current
Positive Supply Current
Negative Supply Current
Power Dissipation
Power Supply Sensitivity
Symbol
Condition
3 V to 5 V ± 10%
±5 V ± 10%
Unit
IDD_SD
IDD
IDD
ISS
PDISS
PSS
No load
VIL = 0 V, no load, −40°C < TA < +125°C
VIL = 0 V, no load, −40°C < TA < +85°C
VIL = 0 V, no load
VIL = 0 V, no load
ΔVDD = ±5%
30/60
1.5/2.8
1.5/2.6
1.5/2.5
5
0.006
30/60
1.6/3
1.6/2.8
1.6/2.7
16
0.006
μA typ/max
mA typ/max
mA typ/max
mA typ/max
mW typ
%/% max
One LSB = VREF/4096 V for the 12-bit AD7398.
The first eight codes (000H to 007H) are excluded from the linearity error measurement in single-supply operation.
These parameters are guaranteed by design and not subject to production testing.
4
When VREF is connected to either the VDD or the VSS power supply, the corresponding VOUT voltage programs between ground and the supply voltage minus the offset
voltage of the output buffer, which is the same as the VZSE error specification. See additional information in the Theory of Operation section.
5
Input resistance is code dependent.
6
Typicals represent average readings measured at 25°C.
7
All input control signals are specified with tR = tF = 2 ns (10% to 90% of 3 V) and timed from a voltage level of 1.5 V.
8
The settling time specification does not apply for negative going transitions within the last 3 LSBs of ground.
1
2
3
AD7399 10-BIT VOLTAGE OUTPUT DAC
VDD = 5 V, VSS = 0 V; or VDD = +5 V, VSS = –5 V; VREF = +2.5 V, −40°C < TA < +125°C, unless otherwise noted.
Table 2.
Parameter
STATIC PERFORMANCE
Resolution1
Relative Accuracy2
Differential Nonlinearity2
Zero-Scale Error
Full-Scale Voltage Error
Full-Scale Tempco3
REFERENCE INPUT
VREFIN Range4
Input Resistance5
Input Capacitance3
ANALOG OUTPUT
Output Voltage Range
Output Current
Capacitive Load3
LOGIC INPUTS
Logic Input Low Voltage
Logic Input High Voltage
Input Leakage Current
Input Capacitance3
INTERFACE TIMING3, 7
Clock Frequency
Clock Width High
Clock Width Low
CS to Clock Setup
Clock to CS Hold
Load DAC Pulse Width
Data Setup
Data Hold
Load Setup to CS
Load Hold to CS
Symbol
3 V to 5 V ± 10%
±5 V ± 10%
Unit
10
±1
±1
7
±15
1.5
10
±1
±1
±4
±15
1.5
Bits
LSB max
LSB max
mV max
mV max
ppm/°C typ
0/VDD
40
5
VSS/VDD
40
5
V min/max
kΩ typ6
pF typ
0 to VREF
±5
200
0 to VREF
±5
400
V
mA typ
pF max
IIL
CIL
0.5
0.8
80% VDD
2.1 to 2.4
1
10
0.8
4.0
2.4
1
10
V max
V max
V min
V min
μA max
pF max
fCLK
tCH
tCL
tCSS
tCSH
tLDAC
tDS
tDH
tLDS
tLDH
11
45
45
10
20
45
15
10
0
20
16.6
30
30
5
15
30
10
5
0
15
MHz max
ns min
ns min
ns min
ns min
ns min
ns min
ns min
ns min
ns min
N
INL
DNL
VZSE
VFSE
TCVFS
VREF
RREF
CREF
VOUT
IOUT
CL
VIL
VIH
Condition
Monotonic
Data = 000H
Data = 3FFH
Data = 155H, worst case
Data = 200H, ΔVOUT = 1 LSB
No oscillation
VDD = 3 V
VDD = 5 V
CLK only
Rev. C | Page 4 of 24
AD7398/AD7399
Parameter
AC CHARACTERISTICS
Output Slew Rate
Settling Time8
Shutdown Recovery
DAC Glitch
Digital Feedthrough
Feedthrough
Symbol
Condition
3 V to 5 V ± 10%
±5 V ± 10%
Unit
SR
tS
tSDR
Q
QDF
VOUT/VREF
Data = 000H to 3FFH to 000H
To ±0.1% of full scale
2
6
6
150
15
−63
2
6
6
150
15
−63
V/μs typ
μs typ
μs typ
nVs typ
nVs typ
dB typ
SUPPLY CHARACTERISTICS
Shutdown Supply Current
Positive Supply Current
IDD_SD
IDD
No load
VIL = 0 V, no load,
−40°C < TA < +125°C
VIL = 0 V, no load,
−40°C < TA < +85°C
VIL = 0 V, no load
VIL = 0 V, no load
ΔVDD = ±5%
30/60
1.5/2.8
30/60
1.6/3
μA typ/max
mA typ/max
1.5/2.6
1.6/2.8
mA typ/max
1.5/2.5
5
0.006
1.6/2.7
16
0.006
mA typ/max
mW typ
%/% max
Code 1FFH to 200H to 1FFH
VREF = 1.5 VDC + 1 V p-p,
data = 000H, f = 100 kHz
IDD
Negative Supply Current
Power Dissipation
Power Supply Sensitivity
ISS
PDISS
PSS
One LSB = VREF/1024 V for the 10-bit AD7399.
The first two codes (000H and 001H) are excluded from the linearity error measurement in single-supply operation.
3
These parameters are guaranteed by design and not subject to production testing.
4
When VREF is connected to either the VDD or the VSS power supply, the corresponding VOUT voltage programs between ground and the supply voltage minus the offset
voltage of the output buffer, which is the same as the VZSE error specification. See additional discussion in the Theory of Operation section.
5
Input resistance is code dependent.
6
Typicals represent average readings measured at 25°C.
7
All input control signals are specified with tR = tF = 2 ns (10% to 90% of 3 V) and timed from a voltage level of 1.5 V.
8
The settling time specification does not apply for negative going transitions within the last 3 LSBs of ground.
1
2
TIMING DIAGRAMS
SDI
SA
SD
A1
A0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
IN
REG
LD
CLK
tDS
tDH
tCH
tCL
tCSH
tCSS
CS
tLDH
tLDS
tLDAC
02179-003
LDAC
Figure 3. AD7398 Timing Diagram (AD7399 with SDI = 14 Bits Only)
CLK
tCH
LDAC
tCL
1/fCLK
tLDH
tLDS
tLDS
CS
tCSS
tCSH
Figure 4. Continuous Clock Timing Diagram
Rev. C | Page 5 of 24
tCSS
02179-004
tLDAC
AD7398/AD7399
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
VDD to GND
VSS to GND
VREF to GND
Logic Inputs to GND
VOUT to GND
IOUT Short Circuit to GND
Thermal Resistance (θJA)
16-Lead SOIC_W Package
(RW-16)
16-Lead TSSOP Package
(RU-16)
Maximum Junction
Temperature (TJ Max)
Package Power Dissipation
Operating Temperature Range
Storage Temperature Range
Reflow Soldering Peak
Temperature
SnPb
Pb-Free
Rating
−0.3 V, +7 V
+0.3 V, −7 V
VSS, VDD
−0.3 V, +8 V
VSS − 0.3 V, VDD + 0.3 V
50 mA
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
158°C/W
180°C/W
150°C
(TJ Max – TA)/θJA
−40°C to +125°C
−65°C to +150°C
240°C
260°C
Rev. C | Page 6 of 24
AD7398/AD7399
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
VOUTB 1
16
VOUTC
VOUTA 2
15
VOUTD
VSS 3
VREF A 4
AD7398/
AD7399
TOP VIEW
(Not to Scale)
14
VDD
13
VREF C
12
VREF D
GND 6
11
SDI
LDAC 7
10
CLK
RS 8
9
CS
02179-005
VREF B 5
Figure 5. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
Mnemonic
1
VOUTB
Description
DAC B Voltage Output.
2
VOUTA
DAC A Voltage Output.
3
VSS
Negative Power Supply Input. Specified range of operation 0 V to −5.5 V.
4
VREFA
DAC A Reference Voltage Input Terminal. Establishes DAC A full-scale output voltage. Pin can be tied to VDD pin or VSS pin.
5
VREFB
DAC B Reference Voltage Input Terminal. Establishes DAC B full-scale output voltage. Pin can be tied to VDD pin or VSS pin.
6
GND
Ground Pin.
7
LDAC
Load DAC Register Strobe. Level sensitive active low. Transfers all input register data to DAC registers.
Asynchronous active low input. See Table 5 for operation.
8
RS
Resets Input and DAC Registers to All Zero Codes. Shift register contents unchanged.
9
CS
Chip Select. Active low input. Disables shift register loading when high. Transfers serial register data to the input
register when CS returns high. Does not effect LDAC operation.
10
CLK
Schmitt Triggered Clock Input. Positive edge clocks data into shift register.
11
SDI
Serial Data Input. Input data loads directly into the shift register.
12
VREFD
DAC D Reference Voltage Input Terminal. Establishes DAC D full-scale output voltage. Pin can be tied to VDD pin or VSS pin.
13
VREFC
DAC C Reference Voltage Input Terminal. Establishes DAC C full-scale output voltage. Pin can be tied to VDD pin or VSS pin.
14
VDD
Positive Power Supply Input. Specified range of operation 3 V to 5 V ± 10%.
15
VOUTD
DAC D Voltage Output.
16
VOUTC
DAC C Voltage Output.
Table 5. Control Logic Truth Table
CS
CLK
LDAC
Serial Shift Register Function
Input Register Function
DAC Register
H
L
L
L
↑+
H
H
X
L
↑+
H
L/H
X
X
H
H
H
H
H
L
↑+
No effect
No effect
Shift register data advanced one bit
No effect
No effect
No effect
No effect
No effect
No effect
Latched
Latched
Updated with shift register contents
Latched
Latched
No effect
No effect
No effect
No effect
No effect
Transparent
Latched
NOTES
1. ↑+ = Positive logic transition; ↓– = Negative logic transition; X = Don’t Care.
2. At power-on, both the input register and the DAC register are loaded with all zeros.
3. During power shutdown, reprogramming of any internal registers can take place, but the output amplifiers do not produce the new values until the part is taken out
of shutdown mode.
4. The LDAC input is a level-sensitive input that controls the four DAC registers.
Rev. C | Page 7 of 24
AD7398/AD7399
INPUT REGISTERS
AD7398 SERIAL INPUT REGISTER DATA FORMAT
Data is loaded in the MSB first format.
MSB
B15
SA
B14
SD
B13
A1
B12
A0
B11
D11
B10
D10
B9
D9
B8
D8
B7
D7
B6
D6
B5
D5
B4
D4
B3
D3
B2
D2
B1
D1
LSB
B0
D0
NOTE
Bit Position B14 and Bit Position B15 are the SD and SA power shutdown control bits. If SA is set to Logic 1, all DACs are placed in the power shutdown mode. If SD is set
to Logic 1, the address decoded by Bit B12 and Bit B13 (A0 and A1) determine the DAC channel that is placed in the power shutdown state.
AD7399 SERIAL INPUT REGISTER DATA FORMAT
Data is loaded in the MSB first format.
MSB
B13
SA
B12
SD
B11
A1
B10
A0
B9
D9
B8
D8
B7
D7
B6
D6
B5
D5
B4
D4
B3
D3
B2
D2
B1
D1
LSB
B0
D0
NOTE
Bit Position B12 and Bit Position B13 are the SD and SA power shutdown control bits. If SA is set to Logic 1, all DACs are placed in the power shutdown mode. If SD is set
to Logic 1, the address decoded by Bit B10 and Bit B11 (A0 and A1) determine the DAC channel that is placed in the power shutdown state.
Table 6. AD7398/AD7399 Address Decode Control
SA
1
0
0
0
0
0
0
0
0
SD
X
1
1
1
1
0
0
0
0
A1
X
0
0
1
1
0
0
1
1
A0
X
0
1
0
1
0
1
0
1
DAC Channel Affected
All DACs shutdown
DAC A shutdown
DAC B shutdown
DAC C shutdown
DAC D shutdown
DAC A input register decoded
DAC B input register decoded
DAC C input register decoded
DAC D input register decoded
Rev. C | Page 8 of 24
AD7398/AD7399
TERMINOLOGY
Relative Accuracy (INL)
For the DAC, relative accuracy or integral nonlinearity (INL) is
a measure of the maximum deviation, in LSBs, from a straight
line passing through the endpoints of the DAC transfer function.
Figure 6 illustrates a typical INL vs. code plot.
Differential Nonlinearity (DNL)
Differential nonlinearity is the difference between the measured
change and the ideal 1 LSB change between any two adjacent
codes. A specified differential nonlinearity of ±1 LSB maximum
ensures monotonicity. Figure 8 illustrates a typical DNL vs.
code plot.
Zero-Scale Error (VZSE)
Zero-scale error is a measure of the output voltage error from
zero voltage when zero code is loaded to the DAC register.
Full-Scale Error (VFSE)
Full-scale error is a measure of the output voltage error from
full-scale voltage when full-scale code is loaded to the DAC
register.
Full-Scale Temperature Coefficient (TCVFS)
This is a measure of the change in full-scale error with a change
in temperature. It is expressed in ppm/°C or mV/°C.
DAC Glitch Impulse (Q)
Digital-to-analog glitch impulse is the impulse injected into the
analog output when the input code in the DAC register changes
state. It is normally specified as the area of the glitch in nV −s and
is measured when the digital input code is changed by 1 LSB at the
major carry transition (midscale transition). A plot of the glitch
impulse is shown in Figure 15.
Digital Feedthrough (QDF)
Digital feedthrough is a measure of the impulse injected into
the analog output of the DAC from the digital inputs of the
DAC, but is measured when the DAC output is not updated. CS
is held high while the CLK and SDI signals are toggled. It is
specified in nV − s, and is measured with a full-scale code change
on the data bus, such as from all 0s to all 1s and vice versa. A
typical plot of digital feedthrough is shown in Figure 16.
Power Supply Sensitivity (PSS)
This specification indicates how the output of the DAC is
affected by changes in the power supply voltage. Power supply
sensitivity is quoted in terms of % change in output per % change
in VDD for full-scale output of the DAC. VDD is varied by ±10%.
Reference Feedthrough (VOUT/VREF)
This is a measure of the feedthrough from the VREF input to the
DAC output when the DAC is loaded with all 0s. A 100 kHz,
1 V p-p is applied to VREF. Reference feedthrough is expressed in
dB or mV p-p.
Rev. C | Page 9 of 24
AD7398/AD7399
TYPICAL PERFORMANCE CHARACTERISTICS
1.25
1.00
0.3
0.2
0.50
0.1
DNL (LSB)
0.75
0.25
0
0
–0.1
–0.25
–0.2
–0.50
–0.3
–0.75
–1.00
0
512
1024
1536
2048
2560
3072
3584
AD7398
VDD = +5V
VSS = –5V
VREF = +2.5V
TA = 25°C
0.4
02179-006
INL (LSB)
0.5
AD7398
VDD = +5V
VSS = –5V
VREF = +2.5V
TA = 25°C
02179-008
1.50
–0.4
–0.5
4096
0
512
1024
CODE (Decimal)
0.50
DNL (LSB)
INL (LSB)
0.25
0
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
256
384
3072
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
DAC D
128
2560
0.25
DAC D
–0.25
–0.50
512
640
768
896
1024
0
128
256
384
512
640
768
1024
0.50
DAC C
DAC C
0.25
DNL (LSB)
INL (LSB)
896
CODE (Decimal)
0.50
0
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
–0.50
0
128
256
384
0.25
0
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
–0.50
512
640
768
896
0
1024
128
256
384
512
640
768
896
1024
CODE (Decimal)
CODE (Decimal)
0.50
0.50
DAC B
DAC B
0.25
DNL (LSB)
INL (LSB)
4096
0
CODE (Decimal)
0
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
–0.50
0
128
256
384
0.25
0
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
–0.50
512
640
768
896
0
1024
128
256
384
512
640
768
896
1024
CODE (Decimal)
CODE (Decimal)
0.50
0.50
DAC A
0
02179-007
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
–0.50
0
128
256
384
512
640
768
896
0.25
0
–0.25
TA = 25°C, VDD = +5V,
VSS = –5V, VREF = +2.5V
–0.50
0
1024
02179-009
0.25
DNL (LSB)
DAC A
INL (LSB)
3584
Figure 8. AD7398 DNL vs. Code (TA = 25 °C)
0.50
0
2048
CODE (Decimal)
Figure 6. AD7398 INL vs. Code (TA = 25°C)
–0.50
1536
128
256
384
512
640
768
CODE (Decimal)
CODE (Decimal)
Figure 7. AD7399 INL vs. Code (TA = 25°C)
Figure 9. AD7399 DNL vs. Code (TA = 25 °C)
Rev. C | Page 10 of 24
896
1024
AD7398/AD7399
10
AD7398
TA = 25°C
VDD = +5V
VSS = –5V
0.75
DNL
8
6
VDD = +5V, VSS = –5V
4
ΔVOUT (mV)
INL, DNL, FSE (LSB)
0.50
0.25
INL
0
FSE
–0.25
2
0
VDD = +5V, VSS = 0V
–2
–4
SOURCING CURRENT FROM VOUT
VDD = +5V, VSS = –5V
VDD = +5V, VSS = 0V
VDD = +3V, VSS = 0V
–0.50
–6
–1.00
–5
02179-010
–0.75
–4
–3
–2
–1
0
1
2
3
4
–8
–10
–20
5
–15
Figure 10. AD7398 INL, DNL, FSE vs. Reference Voltage
5
10
15
20
AD7398
SAMPLE SIZE = 125
–40°C TO +125°C
20
70
COUNTS
60
50
40
15
10
30
20
0
0
512
1024
1536
2048
2560
3072
3584
0
0.4
4096
CODE (Decimal)
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
FULL-SCALE ERROR TEMPCO (ppm/°C)
Figure 11. AD7398 Reference Input Current vs. Code
1000
02179-014
5
10
Figure 14. AD7398 Full-Scale Error Tempco
AD7398
VDD = +5V
VSS = –5V
TA = 25°C
100
90
100
CS (5V/DIV)
VOUT (0.2V/DIV)
10
10
0
512
1024
1536
2048
2560
3072
3584
0%
02179-015
02179-012
REFERENCE INPUT RESISTANCE (kΩ)
0
25
02179-011
REFERENCE INPUT CURRENT (µA)
80
–5
Figure 13. ΔVOUT vs. Load Current
AD7398
VDD = +5V
VSS = –5V
VREF = +2.5V
TA = 25°C
90
–15
SOURCE OR SINK CURRENT FROM VOUT (mA)
REFERENCE VOLTAGE (V)
100
AD7398/AD7399
TA = 25°C
SINKING CURRENT INTO VOUT
VDD = +3V, VSS = 0V
02179-013
1.00
4096
CODE (Decimal)
TIME (2µs/DIV)
Figure 12. AD7398 Reference Input Resistance vs. Code
Figure 15. AD7398 Midscale Glitch
Rev. C | Page 11 of 24
AD7398/AD7399
VOUT (50mV/DIV)
–24
–36
–48
–60
–72
–84
CLOCK (5V/DIV)
10
0x000
02179-016
0%
–96
VDD = +5V
VSS = –5V
VREF = +100mV rms
TA = 25°C
100
1k
100k
10k
TIME (100ns/DIV)
ATTENUATION (dB)
90
–12
02179-019
100
0
0xFFF
0x800
0x400
0x200
0x100
0x080
0x040
0x020
0x010
0x008
0x004
0x002
0x001
–108
1M
FREQUENCY (Hz)
Figure 19. AD7398 Multiplying Gain vs. Frequency
Figure 16. AD7398 Digital Feedthrough
5
VDD = +5V, VSS = –5V, VREF = +5V
100
VOUT (2V/DIV)
90
SUPPLY CURRENT (mA)
DLY 54µs
TA = 25°C
1. VDD = +5V,
3. VDD = +5V,
4 3. VDD = +5V,
4. VDD = +5V,
5. VDD = +3V,
6. VDD = +3V,
VSS
VSS
VSS
VSS
VSS
VSS
= –5V, CODE = 0x000, 0xFFF
= –5V, CODE = 0x555
= 0V, CODE = 0x000, 0xFFF
= 0V, CODE = 0x555
= 0V, CODE = 0x000, 0xFFF
= 0V, CODE = 0x555
2
4
3
1
6
3
2
5
1
02179-020
10
0%
5µs
02179-017
CS (5V/DIV)
2v
5V
0
1k
10k
100k
1M
10M
100M
CLOCK FREQUENCY (Hz)
TIME (5µs/DIV)
Figure 17. AD7398 Large Signal Settling Time
Figure 20. AD7398 Supply Current vs. Clock Frequency
VDD = +5V, VSS = –5V, VREF = +5V
AD7398
TA = 25°C
VREF = +2.5V
DLY 67µs
100
VOUT (2V/DIV)
90
10
CS (5V/DIV)
±5V
DUAL SUPPLY
1.75
±3V
SINGLE SUPPLY
1.50
1.25
02179-021
0.8V
POWER SUPPLY CURRENT (mA)
A2
2.00
5V
2V
2µs
02179-018
0%
1.00
2
3
4
5
POWER SUPPLY VOLTAGE (V)
TIME (2µs/DIV)
Figure 18. AD7398 Shutdown Recovery
Figure 21. AD7398 Supply Current vs. Supply Voltage
Rev. C | Page 12 of 24
6
AD7398/AD7399
1.00
2.0
1.5
1.0
02179-022
0.5
0
–50
0
50
100
34
33
32
02179-023
SHUTDOWN CURRENT (µA)
35
20
40
60
0.25
CODE = 0x000
100
200
300
400
Figure 24. AD7398 Long-Term Drift
AD7398/AD7399
VDD = +5V
VSS = –5V
0
CODE = 0xFFF
HOURS OF OPERATION AT 150°C
36
–20
0.50
0
Figure 22. Supply Current vs. Temperature
–40
0.75
0
150
TEMPERATURE (°C)
31
–60
AD7398
SAMPLE SIZE = 135
VREF = 2.5V
80
100
120
02179-024
SUPPLY CURRENT (mA)
2.5
AD7398/AD7399
VDD = +5V
VSS = –5V
NOMINAL CHANGE IN VOLTAGE (mV)
3.0
140
TEMPERATURE (°C)
Figure 23. Shutdown Current vs. Temperature
Rev. C | Page 13 of 24
500
600
AD7398/AD7399
THEORY OF OPERATION
VDD
VREF A VREF B VREF C VREF D
AD7398/AD7399
CS
INPUT
REGISTER
DAC
REGISTER
DAC A
VOUTA
INPUT
REGISTER
DAC
REGISTER
DAC B
VOUTB
INPUT
REGISTER
DAC
REGISTER
DAC C
VOUTC
INPUT
REGISTER
DAC
REGISTER
DAC D
VOUTD
LDAC
VSS
CLK
ADDRESS
DECODE
4
SDI
SERIAL
REGISTER
12/10
RS
GND
02179-025
POWER
ON RESET
Figure 25. Simplified Block Diagram
The AD7398/AD7399 contain four 12-bit and 10-bit,
respectively, voltage output, digital-to-analog converters. Each
DAC has its own independent multiplying reference input. Both
the AD7398 and AD7399 use a 3-wire, SPI-compatible serial
data interface, with an asynchronous RS pin for zero-scale reset.
In addition, an LDAC strobe enables four-channel simultaneous
updates for hardware-synchronized output voltage changes.
VDD
VOUTA
02179-026
R
VSS
(1)
VOUT = VREF × D/1024 (For AD7399)
(2)
where:
In order to maintain good analog performance, the user should
bypass power supplies with 0.01 μF ceramic capacitors (mount
them close to the supply pins) and 1 μF to 10 μF tantalum
capacitors in parallel. In addition, clean power supplies with low
ripple voltage capability should be used. Switching power supplies
can be used for this application, but beware of its higher ripple
voltage and PSS frequency-dependent characteristics. It is also
best to supply power to the AD7398/AD7399 from the system’s
analog supply voltages. Do not use the digital 5 V supply.
VREF
GND
VOUT = VREF × D/4096 (For AD7398)
D is the 12-bit or 10-bit decimal equivalent of the data word.
VREF is the externally applied reference voltage.
AD7398/AD7399
R
The nominal DAC output voltage is determined by the
externally applied VREF and the digital data (D) as
Figure 26. Simplified DAC Channel
DAC OPERATION
The internal R-2R ladder of the AD7398/AD7399 operates in
the voltage switching mode, maintaining an output voltage that
is the same polarity as the input reference voltage. A proprietary
scaling technique is used to attenuate the input reference voltage in
the DAC. The output buffer amplifies the internal DAC output to
achieve a VREF to VOUT gain of unity.
The reference input resistance is code dependent, exhibiting
worst case 35 kΩ for AD7398 when the DAC is loaded with
alternating codes 010101010101. Similarly, the reference input
resistance is 40 kΩ for AD7399 when the DAC is loaded with
0101010101.
Rev. C | Page 14 of 24
AD7398/AD7399
OPERATION WITH VREF EQUAL TO THE SUPPLY
SERIAL DATA INTERFACE
The AD7398/AD7399 are designed to approach the full output
voltage swing from ground to VDD or VSS. The maximum output
swing is achieved when the corresponding VREF input pin is tied
to the same power supply. This power supply should be low noise
and low ripple, preferably operated by a suitable reference voltage
source such as ADR292 or REF02. The output swing is limited
by the internal buffer offset voltage and the output drive current
capability of the output stage. Users should at least budget the VZSE
offset voltage as the closest the output voltage can get to either
supply voltage under a no load condition. Under a loaded output,
degrade the headroom by a factor of 2 mV per 1 mA of load
current. Also note that the internal op amp has an offset voltage
so that the first eight codes of AD7398 may not respond at the
supply voltage or at ground until the internal DAC voltage
exceeds the offset voltage of the output buffers. Similarly, the first
two codes of AD7399 should not be used.
The AD7398/AD7399 uses a 3-wire (CS, SDI, CLK) SPIcompatible serial data interface. Serial data of the AD7398 and
AD7399 is clocked into the serial input register in a 16-bit and 14bit data-word format, respectively. MSBs are loaded first. The Input
Registers section defines the 16 data-word bits for AD7398 and the
14 data-word bits for the AD7399. Data is placed on the SDI pin,
and clocked into the register on the positive clock edge of CLK,
subject to the data setup and data hold time requirements specified
in the Specifications section. Data can only be clocked in while the
CS chip select pin is active low. For the AD7398, only the last 16
bits clocked into the serial register are interrogated when the CS pin
returns to the logic high state, and extra data bits are ignored. For
the AD7399, only the last 14 bits clocked into the serial register are
interrogated when the CS pin returns to the logic high state.
Because most microcontrollers output serial data is in eight-bit
bytes, two right-justified data bytes can be written to the AD7398
and AD7399. Keeping the CS line low between the first and second
byte transfers results in a successful serial register update.
POWER SUPPLY SEQUENCING
VDD/VSS of AD7398/AD7399 should be powered from the system
analog supplies. The external reference input can be supplied from
the same supply to avoid a possible latch-up when the reference is
powered on prior to VDD/VSS, or powered off subsequent to
VDD/VSS. If VDD/VSS and VREF have separate power sources, ensure
the power-up sequence is GND, VDD, VSS, VREF/digital input/digital
output. The reverse sequence applies to the power-down sequence.
The order of VREF and digital input/digital output is not important.
In addition, VREF pins of the unused DACs should be connected to
GND or some other power sources to ensure a similar powerup/power-down sequence.
PROGRAMMABLE POWER SHUTDOWN
The two MSBs of the serial input register, SA and SD, are used
to program various shutdown modes. If SA is set to Logic 1, all
DACs are placed in shutdown mode. If SA = 0 and SD = 1, a
corresponding DAC is shutdown addressed by Bit A0 and
Bit A1 (see the Input Registers section).
Once the data is properly aligned in the shift register, the positive
edge of the CS initiates the transfer of new data to the target DAC
register, determined by the decoding of Address Bit A1 and
Address Bit A0. For the AD7398, Table 5, Table 6, the Input
Registers section, Figure 3, and Figure 4 define the characteristics
of the serial interface. For the AD7399, Table 5, Table 6, the Input
Registers section, and Figure 4 (with a 14-bit exception) define the
characteristics of the serial interface. Figure 27 and Figure 28 show
the equivalent logic interface for the key digital control pins for
AD7398 and AD7399.
An asynchronous RS provides hardware control reset to zerocode state over the preset function and DAC register loading. If
this function is not needed, the RS pin can be tied to logic high.
TO INPUT REGISTER
CS
ADDRESS
DECODER
WORST CASE ACCURACY
VOUT 
 VREF  VFSE   VZSE  INL
2N
D
EN
CLK
SHIFT
REGISTER
02179-027
Assuming a perfect reference, the worst-case output voltage can
be calculated from the following equation:
SDI
(3)
where:
D = decimal code loaded to DAC ranges 0 ≤ D ≤ 2N–1.
N = number of bits.
VREF = applied reference voltage.
VFSE = full-scale error in volts.
VZSE = zero-scale error in volts.
INL = integral nonlinearity in volts. INL is 0 at full scale or zero
scale.
Rev. C | Page 15 of 24
A
B
C
D
Figure 27. Equivalent Logic Interface
AD7398/AD7399
68HC11/68L11 to AD7398/AD7399 Interface
When the VDD power supply is turned on, an internal reset
strobe forces all the input and DAC registers to the zero-code
state. The VDD power supply should have a smooth positive
ramp without drooping in order to have consistent results,
especially in the region of VDD = 1.5 V to 2.2 V. The VSS supply
has no effect on the power-on reset performance. The DAC
register data stays at zero until a valid serial register data load
takes place.
Figure 30 shows a serial interface between the AD7398/AD7399
and the 68HC11/68L11 microcontroller. SCK of the 68HC11/
68L11 drives the CLK of the DAC, and the MOSI output drives the
serial data lines SDI. CS signal is driven from one of the port lines.
The 68HC11/68L11 are configured for master mode; MSTR = 1,
CPOL = 0, and CPHA = 0. Data appearing on the MOSI output is
valid on the rising edge of SCK.
AD7398/
AD7399
68HC11/
68L111
ESD Protection Circuits
All logic input pins contain back-biased ESD protection Zeners
connected to ground (GND) and VDD as shown in Figure 28.
PC6
LDAC
PC7
CS
MOS1
SDI
SCK
CLK
VDD
1ADDITIONAL
DIGITAL INPUTS
5kΩ
02179-028
Figure 30. 68HC11/68L11 to AD7398/AD7399 Interface
MICROWIRE™ to AD7398/AD7399 Interface
MICROPROCESSOR INTERFACING
Microprocessor interfacing to the AD7398/AD7399 is via a
serial bus that uses standard protocol compatible with DSP
processors and microcontrollers. The communications channel
requires a 3-wire interface consisting of a clock signal, a data
signal, and a synchronization signal. The AD7398/AD7399
require a 16-bit/14-bit data word with data valid on the rising edge
of CLK. The DAC update can be done automatically when all the
data is clocked in, or it can be done under control of LDAC.
Figure 31 shows an interface between the AD7398/AD7399 and
any MICROWIRE-compatible device. Serial data is shifted out
on the falling edge of the serial clock and into the AD7398/
AD7399 on the rising edge of the serial clock. No glue logic is
required as the DAC clocks data into the input shift register on
the rising edge.
MICROWIRE1
Figure 29 shows a serial interface between the AD7398/AD7399
and the ADSP-2101. The ADSP-2101 is set to operate in the serial
port (SPORT) transmit alternate framing mode. The ADSP-2101 is
programmed through the SPORT control register and should be
configured as follows: Internal clock operation, active low framing,
16-bit-word length. For the AD7398, transmission is initiated by
writing a word to the Tx register after the SPORT has been
enabled. For the AD7399, the first two bits are don’t care as the
AD7399 keeps the last 14 bits. Similarly, transmission is initiated
by writing a word to the Tx register after the SPORT has been
enabled. Because of the edge-triggered difference, an inverter is
required at the SCLKs between the DSP and the DAC.
DT
SDI
SCLK
1ADDITIONAL
CLK
PINS OMITTED FOR CLARITY.
A serial interface between the AD7398/AD7399 and the 80C51/
80L51 microcontroller is shown in Figure 32. TxD of the microcontroller drives the CLK of the AD7398/AD7399, and RxD drives
the serial data line of the DAC. P3.3 is a bit-programmable pin on
the serial port that is used to drive CS.
AD7398/
AD7399
80C51/
80L511
P3.4
LDAC
P3.3
CS
RxD
SDI
TxD
CLK
1ADDITIONAL
PINS OMITTED FOR CLARITY.
Figure 32. 80C51/80L51 to AD7398/AD7399 Interface
CLK
PINS OMITTED FOR CLARITY.
SDI
80C51/80L51 to AD7398/AD7399 Interface
LDAC
CS
SO
Figure 31. MICROWIRE to AD7398/AD7399 Interface
02179-029
FO
CS
1ADDITIONAL
AD7398/
AD7399
TFS
CS
SCK
ADSP-2101 to AD7398/AD7399 Interface
AD7398/
AD7399
02179-031
Figure 28. Equivalent ESD Protection Circuits
02179-032
GND
ADSP-21011
PINS OMITTED FOR CLARITY.
02179-030
POWER-ON RESET
Figure 29. ADSP-2101 to AD7398/AD7399 Interface
Rev. C | Page 16 of 24
AD7398/AD7399
Note that the 80C51/80L51 provide the LSB first, although the
AD7398/AD7399 expect the MSB of the 16-bit/14-bit word
first. Care should be taken to ensure the transmit routine takes
this into account. This can usually be done with software by
shifting out and accumulating the bits in the correct order
before inputting to the DAC. In addition, 80C51 outputs two
byte words/16 bits of data. Thus for AD7399, the first two bits,
after rearrangement, should be don’t care as they are dropped
from the 14-bit word of the AD7399.
When data is to be transmitted to the DAC, P3.3 is taken low.
Data on RxD is valid on the falling edge of TxD, so the clock
must be inverted as the DAC clocks data into the input shift
register on the rising edge of the serial clock. The 80C51/80L51
transmit their data in 8-bit bytes with only eight falling clock
edges occurring in the transmit cycle. As the AD7399 requires a
14-bit word, P3.3 (or any one of the other programmable bits) is the
CS input signal to the DAC; therefore P3.3 should be brought low
at the beginning of the 16-bit write cycle 2 × 8 bit-words, and held
low until the 16-bit 2 × 8 cycle is completed. After that, P3.3 is
brought high again and the new data loads to the DAC. Again, the
first two bits, after rearranging, should be don’t care. LDAC on the
AD7398/AD7399 can also be controlled by the 80C51/80L51 serial
port output by using another bit-programmable pin, P3.4.
Rev. C | Page 17 of 24
AD7398/AD7399
APPLICATIONS INFORMATION
STAIRCASE WINDOWS COMPARATOR
VTEST
Many applications need to determine whether voltage levels are
within predetermined limits. Some requirements are for
nonoverlapping windows and others for overlapping windows.
Both circuit configurations are shown in Figure 33 and
Figure 34, respectively.
+
AD7398/
AD7399
VOUTC
VREF C
–
VOUTA
+
V+
10kΩ
WINDOW 2
–
+
–
1/2
AD8564
+
VREF A
–
WINDOW 1
–
VDD
VOUTB
VREF B
10kΩ
+
WINDOW 1
+
VOUTA
VREF A
V+
AD8564
10kΩ
–
VDD
VTEST
VREF
V+
AD8564
VREF
V+
GND
10kΩ
+
VOUTD
VREF D
WINDOW 2
–
+
V+
10kΩ
WINDOW 3
–
+
–
Figure 35. Overlapping Windows Comparator
V+
AD8564
VREF
10kΩ
+
WINDOW 3
–
VOUTB
–
VREF C
VOUTC
WINDOW 2
V+
VOUTD
10kΩ
+
VOUTC
WINDOW 4
–
GND
+
1/2
AD8564
VOUTD
V+
10kΩ
+
WINDOW 5
–
GND
+
02179-033
–
The nonoverlapping circuit employs one AD7398/AD7399 and
ten comparators to achieve five voltage windows. These windows
range between VREF and analog ground as shown in Figure 34.
Similarly, the overlapping circuit employs six comparators to
achieve three overlapping windows (see Figure 36).
Figure 33. Nonoverlapping Windows Comparator
VREF
WINDOW 1
VOUTA
VOUTB
WINDOW 2
WINDOW 3
VOUTC
GND
WINDOW 5
02179-034
WINDOW 4
VOUTD
WINDOW 3
Figure 36. Overlapping Windows Range
–
VREF D
WINDOW 1
VOUTA
+
02179-036
VOUTB
VREF B
02179-035
–
+
AD7398/
AD7399
Figure 34. Nonoverlapping Windows Range
Rev. C | Page 18 of 24
AD7398/AD7399
PROGRAMMABLE DAC REFERENCE VOLTAGE
Table 7. VREFX vs. R1 and R2
With the flexibility of the AD7398/AD7399, one of the internal
DACs can be used to control a common programmable VREFX
for the remainder of the DACs.
R1, R2
R1 = R2
R1 = R2
R1 = R2
R1 = 3R2
R1 = 3R2
R1 = 3R2
The circuit configuration is shown in Figure 37. The relationship of
VREFX to VREF is dependent upon the digital code and the ratio of
R1 and R2, and is given by
R2 
D R2
VREFX = VREF × 1 +
 − VREFX × N ×
R1 
2
R1

VREFX
(5)
where:
D = decimal equivalent of input code.
N = number of bits.
VREF = applied external reference.
VREFX = reference voltage for DAC A to DAC D.
AD7398/AD7399
VREF A
VOUTA
R2 ±0.1%
R1 ±0.1%
VREF
DAC A
VIN
VREF B
ADR293
VOUTB
DAC B
VREF C
VOUTC
DAC C
TO OTHER
COMPONENTS
VOUTD
02179-037
VREF D
VREFX
2 VREF
1.3 VREF
VREF
4 VREF
1.6 VREF
VREF
The accuracy of VREFX is affected by the quality of R1 and R2.
Therefore, tight tolerance, low tempco, thin film resistors
should be used.
(4)
R2 
VREF × 1 +

R1 

=

D R2 
1 + N × R1 
 2

Digital Code
0000 0000 0000
1000 0000 0000
1111 1111 1111
0000 0000 0000
1000 0000 0000
1111 1111 1111
DAC D
Figure 37. Programmable DAC Reference
Rev. C | Page 19 of 24
AD7398/AD7399
OUTLINE DIMENSIONS
10.50 (0.4134)
10.10 (0.3976)
9
16
7.60 (0.2992)
7.40 (0.2913)
1
10.65 (0.4193)
10.00 (0.3937)
8
1.27 (0.0500)
BSC
0.30 (0.0118)
0.10 (0.0039)
COPLANARITY
0.10
0.75 (0.0295)
45°
0.25 (0.0098)
2.65 (0.1043)
2.35 (0.0925)
SEATING
PLANE
0.51 (0.0201)
0.31 (0.0122)
8°
0°
0.33 (0.0130)
0.20 (0.0079)
1.27 (0.0500)
0.40 (0.0157)
03-27-2007-B
COMPLIANT TO JEDEC STANDARDS MS-013-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 38. 16-Lead Standard Small Outline Package [SOIC_W]
Wide Body
(RW-16)
Dimensions shown in millimeters and (inches)
5.10
5.00
4.90
16
9
4.50
4.40
4.30
6.40
BSC
1
8
PIN 1
1.20
MAX
0.15
0.05
0.20
0.09
0.65
BSC
0.30
0.19
COPLANARITY
0.10
SEATING
PLANE
8°
0°
COMPLIANT TO JEDEC STANDARDS MO-153-AB
Figure 39. 16-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-16)
Dimensions shown in millimeters
Rev. C | Page 20 of 24
0.75
0.60
0.45
AD7398/AD7399
ORDERING GUIDE
Model1, 2
AD7398BR
AD7398BR-REEL
AD7398BRZ
AD7398BRZ-REEL
AD7398BRU
AD7398BRU-REEL7
AD7398BRUZ
AD7398BRUZ-REEL7
AD7398WBRUZ-RL7
AD7399BR
AD7399BR-REEL
AD7399BRZ
AD7399BRZ-REEL
AD7399BRU
AD7399BRU-REEL7
AD7399BRUZ
AD7399BRUZ-REEL7
1
2
Resolution (Bits)
12
12
12
12
12
12
12
12
12
10
10
10
10
10
10
10
10
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead TSSOP
16-Lead TSSOP
16-Lead TSSOP
16-Lead TSSOP
16-Lead TSSOP
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead TSSOP
16-Lead TSSOP
16-Lead TSSOP
16-Lead TSSOP
Package Option
RW-16
RW-16
RW-16
RW-16
RU-16
RU-16
RU-16
RU-16
RU-16
RW-16
RW-16
RW-16
RW-16
RU-16
RU-16
RU-16
RU-16
Ordering Quantity
47
1,000
47
1,000
96
1,000
96
1,000
1,000
47
1,000
47
1,000
96
1,000
96
1,000
Z = RoHS Compliant Part.
W = Qualified for Automotive Applications.
The AD7398 contains 3254 transistors. The die size measures 108 mils × 144 mils.
AUTOMOTIVE PRODUCTS
The AD7398WBRUZ-RL7 model is available with controlled manufacturing to support the quality and reliability requirements of
automotive applications. Note that this automotive model may have specifications that differ from the commercial models; therefore,
designers should review the Specifications section of this data sheet carefully. Only the automotive grade product shown is available for
use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and
to obtain the specific Automotive Reliability reports for this model.
Rev. C | Page 21 of 24
AD7398/AD7399
NOTES
Rev. C | Page 22 of 24
AD7398/AD7399
NOTES
Rev. C | Page 23 of 24
AD7398/AD7399
NOTES
©2000–2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D02179-0-1/11(C)
Rev. C | Page 24 of 24
Similar pages