Advantech ADAM-3943 4-axis low cost stepping motor control universal pci card Datasheet

PCI-1243U
4-axis Low Cost Stepping Motor
Control Universal PCI Card
Features
 4 axis stepping motor control
 PCI universal bus
 Up to 400 k pulse output rate
 T-curve acceleration/deceleration
 Pulse/Dir and CW/CCW pulse output mode
 Up 24-bit step count
 Opto-Isolated Digital input and output
 Up to 1,500 Vrms system isolation
 BoardIDTM switch
Introduction
PCI-1243U is a 4-axis intelligent stepping motor control card with universal PCI interface. The card’s PCD-4541 motion controller can execute a variety of motion-control commands.
For advanced applications, we supply a DLL so that programs can be created for the Microsoft® Windows® environment.
PCI-1243U is a cost-effective solution for PCI based motion control. Each axis can be controlled directly through the card’s I/O registers. However, use of the card’s high-level DLL
driver is recommended. With the DLL driver, you can easily link to VC++®, Visual Basic® or BCB.
Specifications
Pulse Type Motion Control









Motor Driver Support
Number of Axes
Max. Output Speed
Step Count Range
Pulse Output Type
Position Counters
Home Modes
Velocity Profiles
Local I/O
Machine Interfaces:
General Inputs:
General Outputs:
Stepping
4
400 kpps
0 ~ 16, 777, 215
Pulse/Direction, CW/CCW
±16, 777, 215
4
T or S-curve acceleration/deceleration
PEL x 4, NEL x 4, ORG x 4, SLD x 4, EMG x 1
8
8
Isolated Digital Input
 Channels
 Input Voltage
8
Logic 0: 1 V
Logic 1: 12 V (24 V max.)
 Isolation Protection
3,750 VRMS
 Opto-Isolator Response 25μs
 Input Resistance
4.7 kW
General
Bus Type
Certifications
Connectors
Dimensions
Power Consumption
PCI V2.2
CE
1 x DB-62 female
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 340 mA
Max: 5 V @ 500 mA mA
 Storing Humidity
5 ~ 95% RH, non-condensing (IEC 68-2-3)
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature
-20 ~ 80° C (-4 ~ 170° F)





Ordering Information





PCI-1243U
PCL-10162-1
PCL-10162-3
ADAM-3962
ADAM-3943
4-axis Stepping Motor Control card
DB-62 Cable Assembly, 1 M
DB-62 Cable Assembly, 3 M
DB-62 wiring terminal with DIN-rail mounting
PCI-1243U wiring board with LED
Isolated Digital Output






Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-Isolator Response
8
Sink (NPN)
3,750 VRMS
5 ~ 30 VDC
200 mA max./channel; 1.1 A max. total
25μs
Online Download www.advantech.com/products
Similar pages