AD ADG407BPZ Lc2mos 8-/16-channel high performance analog multiplexer Datasheet

LC2MOS 8-/16-Channel
High Performance Analog Multiplexers
ADG406/ADG407/ADG426
FUNCTIONAL BLOCK DIAGRAMS
ADG406
S1
D
S16
APPLICATIONS
Audio and video routing
Automatic test equipment
Data acquisition systems
Battery powered systems
Sample hold systems
Communication systems
Avionics
PRODUCT HIGHLIGHTS
1.
2.
3.
4.
5.
6.
7.
Extended Signal Range.
The ADG406/ADG407/ADG426 are fabricated on an
enhanced LC2MOS process giving an increased signal
range which extends to the supply rails.
Low Power Dissipation.
Low RON.
Single/Dual Supply Operation.
Single Supply Operation.
For applications where the analog signal is unipolar, the
ADG406/ADG407/ADG426 can be operated from a single
rail power supply. The parts are fully specified with a single
+12 V power supply and remain functional with single
supplies as low as +5 V.
1 OF 16
DECODER
A0 A1 A2 A3 EN
00026-001
44 V supply maximum ratings
VSS to VDD analog signal range
Low on resistance (80 Ω maximum)
Low power
Fast switching
tON < 160 ns
tOFF < 150 ns
Break-before-make switching action
Figure 1.
ADG407
S1A
DA
S8A
S1B
DB
S8B
1 OF 8
DECODER
A0
A1
A2
00026-002
FEATURES
EN
Figure 2.
ADG426
S1
D
S16
DECODER/
LATCHES
A0 A1 A2 A3 EN RS
00026-003
WR
Figure 3.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1994–2010 Analog Devices, Inc. All rights reserved.
ADG406/ADG407/ADG426
TABLE OF CONTENTS
Features .............................................................................................. 1
ADG426 Timing Diagrams..........................................................7
Applications ....................................................................................... 1
Absolute Maximum Ratings ............................................................8
Product Highlights ........................................................................... 1
ESD Caution...................................................................................8
Functional Block Diagrams ............................................................. 1
Pin Configurations and Function Descriptions ............................9
Revision History ............................................................................... 2
Typical Performance Characteristics ........................................... 12
General Description ......................................................................... 3
Test Circuits ..................................................................................... 15
Specifications..................................................................................... 4
Terminology .................................................................................... 18
Dual Supply ................................................................................... 4
Outline Dimensions ....................................................................... 19
Single Supply ................................................................................. 6
Ordering Guide .......................................................................... 20
REVISION HISTORY
5/10—Rev. A to Rev. B
Changes to Ordering Guide .......................................................... 20
6/09—Rev. 0 to Rev. A
Updated Format .................................................................. Universal
Removed T Grade ............................................................... Universal
Added Table 4.................................................................................... 9
Added Table 6.................................................................................. 10
Added Table 8.................................................................................. 11
Updated Outline Dimensions ....................................................... 18
Changes to Ordering Guide .......................................................... 19
4/94—Revision 0: Initial Version
Rev. B | Page 2 of 20
ADG406/ADG407/ADG426
GENERAL DESCRIPTION
The ADG406, ADG407, and ADG426 are monolithic CMOS
analog multiplexers. The ADG406 and ADG426 switch one of
sixteen inputs to a common output as determined by the 4-bit
binary address lines: A0, A1, A2, and A3. The ADG426 has
on-chip address and control latches that facilitate microprocessor
interfacing. The ADG407 switches one of eight differential
inputs to a common differential output as determined by the
3-bit binary address lines A0, A1 and A2. An EN input on all
devices is used to enable or disable the device. When disabled,
all channels are switched off.
The ADG406/ADG407/ADG426 are designed on an enhanced
LC2MOS process that provides low power dissipation yet gives
high switching speed and low on resistance. These features make
the parts suitable for high speed data acquisition systems and
audio signal switching. Low power dissipation makes the parts
suitable for battery powered systems. Each channel conducts
equally well in both directions when on and has an input signal
range which extends to the supplies. In the off condition, signal
levels up to the supplies are blocked. All channels exhibit breakbefore-make switching action preventing momentary shorting
when switching channels. Inherent in the design is low charge
injection for minimum transients when switching the digital
inputs.
Rev. B | Page 3 of 20
ADG406/ADG407/ADG426
SPECIFICATIONS
DUAL SUPPLY
VDD = +15 V ± 10%, VSS = −15 V ± 10%, GND = 0 V, unless otherwise noted.
Table 1.
Parameter 1
ANALOG SWITCH
Analog Signal Range
RON
RON Match
LEAKAGE CURRENTS
Source Off Leakage IS (Off)
Drain Off Leakage ID (Off )
ADG406, ADG426
ADG407
Channel On Leakage ID, IS (On)
ADG406, ADG426
ADG407
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
CIN, Digital Input Capacitance
DYNAMIC CHARACTERISTICS 2
tTRANSITION
Break Before Make Delay, tOPEN
tON (EN, WR)
tOFF (EN, RS)
+25°C
−40°C to +85°C
Unit
VSS to VDD
V
Ω typ
Ω max
Ω typ
Test Conditions/Comments
50
80
4
125
VD = ±10 V, IS = −1 mA
VDD = +13.5 V, VSS = −13.5 V
VD = 0 V, IS = −1 mA
VDD = +16.5 V, VSS = −16.5 V
VD = ±10 V, VS = +10 V, see Figure 26
VD = ±10 V, VS = +10 V; see Figure 27
±0.5
±20
nA max
±1
±1
±20
±20
nA max
nA max
±1
±1
±20
±20
nA max
nA max
2.4
0.8
V min
V max
±1
μA max
pF typ
VIN = 0 or VDD
f = 1 MHz
VS = VD = ±10 V; see Figure 28
8
120
150
10
ns typ
ns max
ns min
RL = 300 Ω, CL = 35 pF; V1 = ±10 V, V2 = +10 V; see Figure 29
250
10
120
160
110
150
175
225
130
180
ns typ
ns max
ns typ
ns max
RL = 300 Ω, CL = 35 pF; VS = 5 V, see Figure 31
100
100
10
100
ADG426 Only
tW, Write Pulse Width
tS, Address, Enable Setup Time
tH, Address, Enable Hold Time
tRS, Reset Pulse Width
Charge Injection
8
ns min
ns min
ns min
ns min
pC typ
Off Isolation
−75
dB typ
Channel-to-Channel Crosstalk
CS (Off )
CD (Off )
ADG406, ADG426
ADG407
CD, CS (On)
ADG406, ADG426
ADG407
85
5
dB typ
pF typ
50
25
pF typ
pF typ
60
40
pF typ
pF typ
RL = 300 Ω, CL = 35 pF; VS = +5 V, see Figure 30
RL = 300 Ω, CL = 35 pF; VS = 5 V, see Figure 31
VS = +5 V
VS = 0 V, RS = 0 Ω, CL = 1 nF;
See Figure 34
RL = 1 k Ω, f = 100 kHz;
VEN = 0 V, see Figure 35
RL = 1 k Ω, f = 100 kHz, see Figure 36
f = 1 MHz
f = 1 MHz
f = 1 MHz
Rev. B | Page 4 of 20
ADG406/ADG407/ADG426
Parameter 1
POWER REQUIREMENTS
IDD
+25°C
ISS
IDD
100
200
ISS
1
2
−40°C to +85°C
Unit
1
5
1
5
μA typ
μA max
μA typ
μA max
μA typ
μA max
μA typ
μA max
500
1
5
Temperature ranges is −40°C to +85°C.
Guaranteed by design, not subject to production test.
Rev. B | Page 5 of 20
Test Conditions/Comments
VDD = +16.5 V, VSS = −16.5 V
VIN = 0 V, VEN = 0 V
VIN = 0 V, VEN = 2.4 V
ADG406/ADG407/ADG426
SINGLE SUPPLY
VDD = +12 V ± 10%, VSS = 0 V, GND = 0 V, unless otherwise noted.
Table 2.
Parameter 1
ANALOG SWITCH
Analog Signal Range
RON
LEAKAGE CURRENTS
Source Off Leakage IS (Off )
Drain Off Leakage ID (Off )
ADG406, ADG426
ADG407
Channel On Leakage ID, IS (On)
ADG406, ADG426
ADG407
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
CIN, Digital Input Capacitance
DYNAMIC CHARACTERISTICS 2
tTRANSITION
Break Before Make Delay, tOPEN
tON (EN, WR)
tOFF (EN, RS)
ADG426 Only
tW, Write Pulse Width
tS, Address, Enable Setup Time
tH, Address, Enable Hold Time
tRS, Reset Pulse Width
Charge Injection
Off Isolation
Channel-to-Channel Crosstalk
CS (Off )
CD (Off )
ADG406, ADG426
ADG407
CD, CS (On)
ADG406, ADG426
ADG407
POWER REQUIREMENTS
IDD
IDD
1
2
+25°C
−40°C to +85°C
Unit
0 to VDD
Test Conditions/Comments
90
125
200
V
Ω typ
Ω max
±0.5
±20
nA max
±1
±1
±20
±20
nA max
nA max
±1
±1
±20
±20
nA max
nA max
2.4
0.8
V min
V max
±1
μA max
pF typ
VIN = 0 or VDD
f = 1 MHz
ns typ
ns max
ns typ
ns typ
ns max
ns typ
ns max
RL = 300 Ω, CL = 35 pF; V1 = 8 V/0 V, V2 = 0 V/8 V; see Figure 29
VD = +3 V, +8.5 V, IS = −1 mA;
VDD = +10.8 V
VDD = +13.2 V
VD = 8 V/0.1 V, VS = 0.1 V/8 V; see Figure 26
VD = 8 V/0.1 V, VS = 0.1 V/8 V; see Figure 27
VS = VD = 8 V/0.1 V, see Figure 28
8
180
220
10
180
240
135
180
350
350
220
100
100
10
100
5
−75
85
8
ns min
ns min
ns min
ns min
pC typ
dB typ
dB typ
pF typ
80
40
pF typ
pF typ
100
50
pF typ
pF typ
1
5
100
200
500
μA typ
μA max
μA typ
μA max
Temperature range is −40°C to +85°C.
Guaranteed by design, not subject to production test.
Rev. B | Page 6 of 20
RL = 300 Ω, CL = 35 pF; VS = 5 V, see Figure 30
RL = 300 Ω, CL = 35 pF;
VS = +5 V, see Figure 31
RL = 300 Ω, CL = 35 pF; VS = 5 V, see Figure 31
VS = +5 V
VS = 6 V, RS = 0 Ω, CL = 1 nF; see Figure 34
RL = 1 kΩ, f = 100 kHz; see Figure 35
RL = 1 kΩ, f = 100 kHz; see Figure 36
f = 1 MHz
f = 1 MHz
f = 1 MHz
VDD = +13.2 V
VIN = 0 V, VEN = 0 V
VIN = 0 V, VEN = 2.4 V
ADG406/ADG407/ADG426
ADG426 TIMING DIAGRAMS
3V
3V
0V
A0, A1, A2, (A3)
EN
0V
50%
0V
tW
tS
3V
RS
50%
tH
2V
0.8V
50%
tW
tOFF (RS)
SWITCH
OUTPUT
0.8V0
0V
Figure 4. Timing Sequence for Latching the Switch Address and Enable Inputs
Figure 4 shows the timing sequence for latching the switch
address and enable inputs. The latches are level sensitive;
therefore, while WR is held low, the latches are transparent and
the switches respond to the address and enable inputs. This
input data is latched on the rising edge of WR.
V0
00026-010
50%
00026-009
WR
Figure 5. Reset Pulse Width and Reset Turn Off Time
Figure 5 shows the reset pulse width, trs, and the reset turn off
time, tOFF (RS).
Note that all digital input signals rise and fall times are
measured from 10% to 90% of 3 V; tR = tF = 20 ns.
Rev. B | Page 7 of 20
ADG406/ADG407/ADG426
ABSOLUTE MAXIMUM RATINGS
TA = 25°C unless otherwise noted.
Table 3.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog, Digital Inputs1
Continuous Current, S or D
Peak Current, S or D
Operating Temperature Range
Industrial (B Version)
Storage Temperature Range
Junction Temperature
Plastic Package
θJA, Thermal Impedance
Lead Temperature, Soldering
(10 sec)
PLCC Package
θJA, Thermal Impedance
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
SSOP Package
θJA, Thermal Impedance
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
1
Rating
44 V
−0.3 V to +25 V
+0.3 V to −25 V
VSS − 2 V to VDD + 2 V or 20 mA,
whichever occurs first
20 mA
40 mA
(Pulsed at 1 ms, 10% duty
cycle max)
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
−40°C to +85°C
−65°C to +150°C
150°C
75°C/W
260°C
80°C/W
215°C
220°C
122°C/W
215°C
220°C
Overvoltages at A, S, D, WR, or RS will be clamped by internal diodes. Current
should be limited to the maximum ratings given.
Rev. B | Page 8 of 20
ADG406/ADG407/ADG426
S11 9
20 S2
S10 10
19 S1
S9 11
18 EN
GND 12
17 A0
NC 13
16 A1
A3 14
15 A2
NC = NO CONNECT
VDD
D
VSS
S8
28
27
26
PIN 1
INDENTFIER
S15
5
S14
6
S13
7
ADG406
23
S5
S12
8
TOP VIEW
(Not to scale)
22
S4
S11 9
25
S7
24
S6
21
S3
S10 10
20
S2
S9 11
19
S1
12
13
14
15
16
17
18
00026-005
S13 7
1
EN
S12 8
23 S5
TOP VIEW
(Not to Scale) 22 S4
21 S3
S14 6
2
A0
24 S6
3
GND
ADG406
00026-004
S15 5
4
A1
25 S7
NC
S16 4
A2
26 S8
A3
27 VSS
NC 3
NC
28 D
NC 2
NC
VDD 1
S16
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
NC = NO CONNECT
Figure 6. 28-Lead PDIP
Figure 7. 28-Lead PLCC
Table 4. Pin Function Descriptions
Pin No.
1
2, 3, 13
4 to 11
12
14 to 17
18
Mnemonic
VDD
NC
S16 to S9
GND
A3 to A0
EN
19 to 26
27
28
S1 to 8
VSS
D
Description
Most Positive Power Supply Potential.
No Connect.
Source Terminal 16 to Source Terminal 9. These pins can be inputs or outputs.
Ground (0 V) Reference.
Logic Control Input.
Active High Digital Input. When this pin is low, the device is disabled and all switches are turned off. When this pin
is high, the Ax logic inputs determine which switch is turned on.
Source Terminal 1 to Source Terminal 8. These pins can be inputs or outputs.
Most Negative Power Supply Potential. In single-supply applications, this pin can be connected to ground.
Drain Terminal. This pin can be an input or an output.
Table 5. Truth Table (ADG406)
A3
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
A2
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
A1
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
A0
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
EN
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Rev. B | Page 9 of 20
On Switch
None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
S3B 9
20 S2A
S2B 10
19 S1A
S1B 11
18 EN
GND 12
17 A0
NC 13
16 A1
NC 14
15 A2
NC = NO CONNECT
VDD
DA
VSS
S8A
28
27
26
S5B 7
S4B
8
S3B 9
25
S7A
24
S6A
ADG407
23
S5A
TOP VIEW
(Not to scale)
22
S4A
21
S3A
S2B 10
20
S2A
S1B 11
19
S1A
12
00026-006
S5B 7
1
13
14
15
16
17
18
EN
S4B 8
23 S5A
TOP VIEW
(Not to Scale) 22 S4A
21 S3A
S6B 6
S6B 6
2
PIN 1
INDENTFIER
00026-007
24 S6A
3
A0
ADG407
4
GND
S7B 5
S7B 5
A1
25 S7A
DB
S8B 4
A2
26 S8A
NC
27 VSS
NC 3
NC
28 DA
DB 2
NC
VDD 1
S8B
ADG406/ADG407/ADG426
NC = NO CONNECT
Figure 8. 28-Lead PDIP
Figure 9. 28-Lead PLCC
Table 6. Pin Function Descriptions
Pin No.
1
2
3, 13, 14
4 to 11
12
15 to 17
18
Mnemonic
VDD
DB
NC
S8B to S1B
GND
A2 to A0
EN
19 to 26
27
28
S1A to S8A
VSS
DA
Description
Most Positive Power Supply Potential.
Drain Terminal B. This pin can be an input or an output.
No Connect.
Source Terminal 8B to Source Terminal 1B. These pins can be inputs or outputs.
Ground (0 V) Reference.
Logic Control Input.
Active High Digital Input. When this pin is low, the device is disabled and all switches are turned off. When this pin
is high, the Ax logic inputs determine which switch is turned on.
Source Terminal 1A to Source Terminal 8A. These pins can be inputs or outputs.
Most Negative Power Supply Potential. In single-supply applications, this pin can be connected to ground.
Drain Terminal A. This pin can be an input or an output.
Table 7. Truth Table (ADG407)
A2
X
0
0
0
0
1
1
1
1
A1
X
0
0
1
1
0
0
1
1
A0
X
0
1
0
1
0
1
0
1
EN
0
1
1
1
1
1
1
1
1
On Switch Pair
None
1
2
3
4
5
6
7
8
Rev. B | Page 10 of 20
ADG406/ADG407/ADG426
VDD 1
28 D
NC 2
27 VSS
RS 3
26 S8
S16 4
25 S7
S14 6
S13 7
S12 8
ADG426
TOP VIEW
(Not to Scale)
24 S6
23 S5
22 S4
21 S3
S11 9
20 S2
S10 10
19 S1
S9 11
18 EN
GND 12
17 A0
WR 13
16 A1
A3 14
15 A2
NC = NO CONNECT
00026-008
S15 5
Figure 10. 28-Lead PDIP/SSOP
Table 8. Pin Function Descriptions
Pin No.
1
2
3
Mnemonic
VDD
NC
RS
4 to 11
12
13
S16 to S9
GND
WR
14 to 17
18
A3 to A0
EN
19 to 26
27
28
S1 to S8
VSS
D
Description
Most Positive Power Supply Potential.
No Connect.
Active Low Logic Input. When this pin is low, all switches are open, and address and enable latches registers are
cleared to 0.
Source Terminal 16 to Source Terminal 9. These pins can be inputs or outputs.
Ground (0 V) Reference.
The rising edge of the WR signal latches the state of the address control lines and the enable line.
Logic Control Input.
Active High Digital Input. When this pin is low, the device is disabled and all switches are turned off. When this pin
is high, the Ax logic inputs determine which switch is turned on.
Source Terminal 1 to Source Terminal 8. These pins can be inputs or outputs.
Most Negative Power Supply Potential. In single-supply applications, this pin can be connected to ground.
Drain Terminal. This pin can be an input or an output.
Table 9. Truth Table (ADG426)
A3
X
X
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
A2
X
X
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
A1
X
X
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
A0
X
X
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
EN
X
X
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
WR
RS
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
On switch
Retains previous switch condition
None (address and enable latches cleared)
None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Rev. B | Page 11 of 20
ADG406/ADG407/ADG426
TYPICAL PERFORMANCE CHARACTERISTICS
150
400
TA = 25°C
TA = 25°C
VDD = +5V
VSS = –5V
90
VDD = +5V
VSS = 0V
300
250
VDD = +10V
VSS = –10V
RON (Ω)
RON (Ω)
120
350
60
200
VDD = +10V
VSS = 0V
150
VDD = +12V
VSS = 0V
VDD = +15V
VSS = –15V
0
–15
–10
VDD = +12V
VSS = –12V
–5
0
5
10
50
00026-011
30
VDD = +15V
VSS = 0V
0
15
00026-014
100
0
2.5
5.0
VD (VS) (V)
7.5
10
Figure 11. RON as a Function of VD (VS): Dual Supplies
15
Figure 14. RON as a Function of VD (VS): Single Supplies
100
150
VDD = +15V
VSS = –15V
VDD = 12V
VSS = 0V
80
120
125°C
125°C
60
RON (Ω)
RON (Ω)
12.5
VD (VS) (V)
85°C
40
90
85°C
25°C
60
25°C
0
–15
–10
–5
0
5
10
0
15
00026-015
30
00026-012
20
0
2
4
VD (VS) (V)
Figure 12. RON as a Function of VD (VS) for Different Temperatures
8
10
12
Figure 15. RON as a Function of VD (VS) for Different Temperatures
0.10
0.02
VDD = +12V
VSS = 0V
TA = +25°C
ID(ON)
0.06
0.04
ID(OFF)
0.02
0
–0.02
–15
–10
–5
0
5
00026-013
IS(OFF)
10
0.01
ID(OFF)
VD (VS) (V)
ID(ON)
–0.01
–0.02
15
IS(OFF)
0
00026-016
LEAKAGE CURRENT (nA)
VDD = +15V
VSS = –15V
TA = +25°C
0.08
LEAKAGE CURRENT (nA)
6
VD (VS) (V)
0
2
4
6
8
10
VD (VS) (V)
Figure 13. Leakage Currents as a Function of VD (VS)
Figure 16. Leakage Currents as a Function of VD (VS)
Rev. B | Page 12 of 20
12
ADG406/ADG407/ADG426
100
100
VDD = +15V
VSS = –15V
VDD = +15V
VSS = –15V
10
1
EN = 2.4V
ISS (mA)
IDD (mA)
10
EN = 2.4V
0.1
EN = 0V
1
0.01
1k
10k
100k
00026-017
0.1
100
1M
00026-020
0.001
EN = 0V
0.0001
100
10M
1k
10k
FREQUENCY (Hz)
100k
1M
10M
FREQUENCY (Hz)
Figure 17. Positive Supply Current vs. Switching Frequency
Figure 20. Negative Supply Current vs. Switching Frequency
160
220
VDD = +15V
VSS = –15V
tON
VDD = +12V
VSS = 0V
200
140
tON
tTRANSITION
180
tTRANSITION
t (ns)
t (ns)
120
100
160
140
120
tOFF
80
1
3
5
7
9
11
13
80
15
00026-021
60
100
00026-018
tOFF
2
4
6
VIN (V)
8
10
12
VIN (V)
Figure 18. Switching Time vs. VIN (Bipolar Supply)
Figure 21. Switching Time vs. VIN (Single Supply)
300
500
VIN = +5V
VIN = +5V
400
tON
200
tTRANSITION
t (ns)
t (ns)
300
tON
200
tTRANSITION
100
tOFF
tOFF
±5
±7
±9
±11
±13
±15
±17
±19
0
±21
00026-022
0
00026-019
100
5
7
9
11
13
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
Figure 22. Switching Time vs. Single Supply
Figure 19. Switching Time vs. Bipolar Supply
Rev. B | Page 13 of 20
15
ADG406/ADG407/ADG426
140
140
VDD = +15V
VSS = –15V
VDD = +15V
VSS = –15V
CROSSTALK (dB)
120
100
80
40
100
100
80
60
1k
10k
100k
1M
40
100
10M
FREQUENCY (Hz)
00026-024
60
00026-023
OFF ISOLATION (dB)
120
1k
10k
100k
FREQUENCY (Hz)
Figure 23. Off Isolation vs. Frequency
Figure 24. Crosstalk vs. Frequency
Rev. B | Page 14 of 20
1M
10M
ADG406/ADG407/ADG426
TEST CIRCUITS
IDS
V1
S1
VDD
VSS
VDD
VSS
S2
S
D
ID (OFF)
A
D
S16
00026-025
RON = V1/IDS
S1
VDD
VSS
VDD
VSS
VDD
VSS
VDD
VSS
ID (ON)
A
S16
S16
EN
VD
+0.8V
VD
EN
VS
00026-026
VS
D
S1
D
S2
+2.4V
00026-028
A
+0.8V
Figure 27. ID (Off)
Figure 25. On Resistance
IS (OFF)
VD
EN
VS
00026-027
VS
Figure 28. ID (On)
Figure 26. IS (Off)
VDD
VSS
VDD
A3
VSS
3V
A2
50Ω
S1
A1
A0
50%
50%
V2
S16
ADG4261
EN
2.4V
V1
S2 THRU S15
RS
GND
D
RL
300Ω
WR
CL
35pF
90%
VOUT
VOUT
90%
tTRANSITION
tTRANSITION
CONNECTION FOR ADG406/ADG407
Figure 29. Switching Time of Multiplexer, tTRANSITION
VDD
VSS
VDD
A3
VSS
3V
VIN
50Ω
A2
S1
S2 THRU S15
A1
A0
S16
ADG4261
RS
2.4V
VS
ADDRESS
DRIVE (VIN)
D
EN
GND
WR
VOUT
RL
300Ω
CL
35pF
OUTPUT
80%
80%
0V
tOPEN
1SIMILAR
CONNECTION FOR ADG406/ADG407
Figure 30. Break-Before-Make Delay, tOPEN
Rev. B | Page 15 of 20
00026-030
1SIMILAR
00026-029
VIN
ADDRESS
DRIVE (VIN)
ADG406/ADG407/ADG426
VDD
VSS
VDD
A3
VSS
A2
3V
S1
ENABLE
DRIVE (VIN)
VS
S2 THRU S16
0V
A1
tOFF (EN)
ADG4261
VO
RS
VOUT
D
RL
300Ω
EN
VIN
GND
50Ω
WR
90%
90%
OUTPUT
CL
35pF
0V
00026-031
A0
2.4V
50%
50%
tON (EN)
1SIMILAR
CONNECTION FOR ADG406/ADG407
Figure 31. Enable Delay, tON (EN), tOFF (EN)
VDD
VSS
VDD
A3
VSS
A2
S1
3V
VS
WR
S2 THRU S16
A1
2.4V
0V
ADG426
A0
V0
EN
D
RS
WR
RL
300Ω
VOUT
CL
35pF
tON(WR)
OUTPUT
0.2V0
0V
GND
00026-032
VRS
50%
VWR
Figure 32. Write Turn-On Time, tON (WR)
VSS
VDD
A3
VSS
A2
S1
3V
VS
RS
S2 THRU S16
A1
A0
2.4V
tOFF(RS)
D
RS
VIN
0V
ADG426
EN
GND
WR
50%
RL
300Ω
VOUT
CL
35pF
V0
0.8V0
OUTPUT
0V
Figure 33. Reset Turn-Off Time, tOFF (RS)
Rev. B | Page 16 of 20
00026-033
VDD
ADG406/ADG407/ADG426
VDD
VSS
VDD
A3
VSS
2.4V
RS
A2
3V
LOGIC
INPUT
(VIN)
A1
RS
VS
ADG4261
D
CL
1nF
EN
VIN
1SIMILAR
GND
VOUT
VOUT
WR
ΔVOUT
QINJ = CL × ΔVOUT
00026-034
A0
S
CONNECTION FOR ADG406/ADG407.
Figure 34. Charge Injection
VDD
VDD
S16
VDD
VDD
1kΩ
S1
A0
A2
S16
A1
2.4V
A3
RS
D
EN
GND
WR
VSS
RL
1kΩ
VSS
1SIMILAR
ADG4261
A2
ADG4261
CONNECTION FOR ADG406/ADG407.
2.4V
VOUT
EN
RS
GND
00026-035
A0
A1
VIN
VOUT
1kΩ
S1
WR
VSS
VSS
1SIMILAR CONNECTION FOR ADG406/ADG407.
Figure 35. Off Isolation
Figure 36. Crosstalk
Rev. B | Page 17 of 20
00026-036
A3
D
S2
VIN
ADG406/ADG407/ADG426
TERMINOLOGY
VDD
Most positive power supply potential.
VSS
Most negative power supply potential in dual supplies. In single
supply applications, it may be connected to ground.
GND
Ground (0 V) reference.
tOFF (EN)
Delay time between the 50% and 90% points of the digital input
and switch off condition.
tTRANSITION
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from
one address state to another.
tOPEN
Off time measured between 80% points of both switches when
switching from one address state to another.
RON
Ohmic resistance between the D and S terminals.
RON Match
Difference between the RON of any two channels.
VINL
Maximum input voltage for Logic 0.
IS (Off)
Source leakage current when the switch is off.
VINH
Minimum input voltage for Logic 1.
ID (Off)
Drain leakage current when the switch is off.
IINL (IINH)
Input current of the digital input.
ID, IS (On)
Channel leakage current when the switch is on.
Crosstalk
A measure of unwanted signal which is coupled through from
one channel to another as a result of parasitic capacitance.
VD (VS)
Analog voltage on Terminal D, Terminal S.
Off Isolation
A measure of unwanted signal coupling through an off channel.
CS (Off)
Channel input capacitance for off condition.
CD (Off)
Channel output capacitance for off condition.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
CD, CS (ON)
On switch capacitance.
IDD
Positive supply current.
CIN
Digital input capacitance.
ISS
Negative supply current.
tON (EN)
Delay time between the 50% and 90% points of the digital input
and switch on condition.
Rev. B | Page 18 of 20
ADG406/ADG407/ADG426
OUTLINE DIMENSIONS
1.565 (39.75)
1.380 (35.05)
28
15
0.580 (14.73)
0.485 (12.31)
1
14
0.625 (15.88)
0.600 (15.24)
0.100 (2.54)
BSC
0.250 (6.35)
MAX
0.195 (4.95)
0.125 (3.17)
0.015 (0.38)
GAUGE
PLANE
0.015
(0.38)
MIN
0.200 (5.08)
0.115 (2.92)
SEATING
PLANE
0.022 (0.56)
0.014 (0.36)
0.700 (17.78)
MAX
0.005 (0.13)
MIN
0.015 (0.38)
0.008 (0.20)
0.070 (1.78)
0.050 (1.27)
071006-A
COMPLIANT TO JEDEC STANDARDS MS-011
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE LEADS.
Figure 37. 28-Lead Plastic Dual In-Line Package {PDIP}
Wide Body
(N-28-2)
Dimensions shown in inches and (millimeters)
0.180 (4.57)
0.165 (4.19)
0.048 (1.22)
0.042 (1.07)
0.056 (1.42)
0.042 (1.07)
4
5
PIN 1
IDENTIFIER
26
25
0.021 (0.53)
0.013 (0.33)
0.050
(1.27)
BSC
TOP VIEW
(PINS DOWN)
11
12
0.020 (0.51)
MIN
0.032 (0.81)
0.026 (0.66)
19
18
0.456 (11.582)
SQ
0.450 (11.430)
0.495 (12.57)
SQ
0.485 (12.32)
0.120 (3.04)
0.090 (2.29)
0.430 (10.92)
0.390 (9.91)
BOTTOM
VIEW
(PINS UP)
0.045 (1.14)
R
0.025 (0.64)
COMPLIANT TO JEDEC STANDARDS MO-047-AB
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 38. 28-Lead Plastic Leaded Chip Carrier [PLCC]
(P-28)
Dimensions shown in inches and (millimeters)
Rev. B | Page 19 of 20
042508-A
0.048 (1.22)
0.042 (1.07)
ADG406/ADG407/ADG426
10.50
10.20
9.90
15
28
5.60
5.30
5.00
1
8.20
7.80
7.40
14
0.65 BSC
0.38
0.22
SEATING
PLANE
8°
4°
0°
COMPLIANT TO JEDEC STANDARDS MO-150-AH
0.95
0.75
0.55
060106-A
0.05 MIN
COPLANARITY
0.10
0.25
0.09
1.85
1.75
1.65
2.00 MAX
Figure 39. 28-Lead Shrink Small Outline Package [SSOP]
(RS-28)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADG406BN
ADG406BNZ
ADG406BP
ADG406BP-REEL
ADG406BPZ
ADG406BPZ-REEL
ADG407BN
ADG407BNZ
ADG407BP
ADG407BP-REEL
ADG407BPZ
ADG407BPZ-RL
ADG407BCHIPS
ADG426BN
ADG426BNZ
ADG426BRS
ADG426BRS-REEL
ADG426BRS-REEL7
ADG426BRSZ
ADG426BRSZ-REEL
1
2
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
Package Description
28-Lead PDIP
28-Lead PDIP
28-Lead PLCC
28-Lead PLCC
28-Lead PLCC
28-Lead PLCC
28-Lead PDIP
28-Lead PDIP
28-Lead PLCC
28-Lead PLCC
28-Lead PLCC
28-Lead PLCC
28-Lead PDIP
28-Lead PDIP
28-Lead SSOP
28-Lead SSOP
28-Lead SSOP
28-Lead SSOP
28-Lead SSOP
Z = RoHS Compliant Part.
N = Plastic DIP, P = Plastic Leaded Chip Carrier (PLCC), RS = Shrink Small Outline Package (SSOP).
©1994–2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00026-0-5/10(B)
Rev. B | Page 20 of 20
Package Option 2
N-28-2
N-28-2
P-28
P-28
P-28
P-28
N-28-2
N-28-2
P-28
P-28
P-28
P-28
DIE
N-28-2
N-28-2
RS-28
RS-28
RS-28
RS-28
RS-28
Similar pages