HP ADNB-2013 Optical mouse sensor Datasheet

Agilent ADNS-2001
Optical Mouse Sensor
Data Sheet
• High speed motion detector
– Accurately measures up to
16 inches per second at 400 cpi
Description
The ADNS-2001 is a low-cost
reflective optical sensor that
provides a non-mechanical
tracking engine for implementing a
computer mouse.
It is based on optical navigation
technology which measures
changes in position by optically
acquiring sequential surface
images (frames) and mathematically determining the direction and
magnitude of movement. The
sensor is mounted in a plastic
optical package and designed to be
used with the HDNS-2100 (Lens),
HDNS-2200 (LED Assembly Clip)
and HLMP-ED80 (High Light
Output 639 nm LED), providing a
complete and compact tracking
engine. This optical tracking
engine has no moving parts and
requires no precision optical
alignment enabling high volume
system assembly. The ADNS-2001
offers a PS/2 or quadrature output
mode for interface flexibility.
Resolution is specified as 400 cpi
at rates of motion up to 16 inches
per second.
Features
• Optical navigation technology
– Superior precision and smooth
navigation optimized for
desktop and portable mouse
applications
– No mechanical moving parts,
provides high reliability and
needs no maintenance
• Complete compact 2-D motion
sensor
– Easy implementation and
design flexibility
– Replaces mechanical ball
system in traditional mice
• Two selectable output modes
– Two channel quadrature output
mode (X and Y direction) which
emulates encoder
phototransistors
– Standard 3-button PS/2 output
mode
• Accurate navigation over a wide
range of surfaces
– Enables mouse to be used with
or without a mouse pad
• Power conservation mode during
no motion
• Compatible with high volume
manufacturing processes
– Requires no precision optical
alignment
– Wave solderable
• 33% faster than HDNS-2000
– 2000 fps (@ 24 MHz)
Applications
• Computer mice for desktop PCs,
workstations, and portable
computers
• Trackball
• Integrated input devices
Caution: It is advised that normal static precautions be taken in handling and assembly of this component to prevent
damage and/or degradation which may be induced by ESD.
Theory of Operation
The ADNS-2001 is based on
Optical Navigation Technology. It
contains an Image Acquisition
System (IAS), Digital Signal Processor (DSP), and a mode selectable PS/2 or quadrature output
converter. The IAS acquires images of microscopic surface images via the lens and illumination
IMAGE
ACQUISITION
SYSTEM
system provided by the HDNS2100, HDNS-2200, and the
HLMP-ED80. These images are
further processed by the DSP to
determine direction and distance
of motion. The DSP generates a
stream of delta x and delta y relative displacement values which
are then communicated to the
output converter. This converter
provides a PS/2 3-button output,
replacing existing mouse
microcontrollers, or two channel
quadrature output, for direct
interface to existing mouse
microcontrollers.
While the part can be run at 24
MHz in quadrature mode, 18 MHz
is recommended for PS/2 mode.
PS/2 or QUAD
OUTPUT
CONVERTER
DIGITAL
SIGNAL
PROCESSOR
A 2001
XYYWWZ
Figure 1. ADNS-2001 block diagram.
PIN 1
0.99
(0.039)
22.30
(0.878)
9.10
(0.358)
3.18
(0.125)
LEAD WIDTH 0.50
(0.020)
5.15
(0.203)
0.25
(0.010)
1.42
(0.056)
LEAD OFFSET 1.27
(0.050)
5° TYP.
KAPTON TAPE
6.17
(0.243)
LEAD PITCH 2.54
(0.100)
12.34
(0.486)
6.02
(0.237)
13.38
(0.527)
4.55
(0.179)
∅ 5.60
(0.220)
Figure 2. ADNS-2001 sensor package outline drawing.
2
NOTES:
1. DIMENSIONS IN MILLIMETERS (INCHES).
2. DIMENSIONAL TOLERANCE: ± 0.1 mm.
3. COPLANARITY OF LEADS: 0.1 mm.
4. LEAD PITCH TOLERANCE: ± 0.15 mm.
5. CUMULATIVE PITCH TOLERANCE: ± 0.15 mm.
6. ANGULAR TOLERANCE: ± 3.0 DEGREES.
7. MAXIMUM FLASH + 0.2 mm.
8. CHAMFER (25 DEGREES x 2) ON THE
TAPER SIDE OF THE LEAD.
Pinout
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Name
PS2_C
MODE/XA
RB/XB
MB/YB
LB/YA
XY_LED
VDD3
REFB
OSC1
GND
OSC2
GND
VDD5
VDD5
NRESET
PS2_D
PS/2 Mode
PS/2 Interface Clock
Select PS/2 Mode
Right Button Input
Middle Button Input
Left Button Input
LED Control Output
3.3 VDC Input
Internal Reference
Oscillator Input
Ground
Oscillator Output
Ground
5 VDC Input
5 VDC Input
NRESET
PS/2 Interface Data
Quadrature Mode
PS/2 Interface Clock
XA Output
XB Output
YB Output
YA Output
LED Control Output
3.3 VDC Input
Internal Reference
Oscillator Input
Ground
Oscillator Output
Ground
5 VDC Input
5 VDC Input
NRESET
PS/2 Interface Data
44.29
(1.744)
2D Assembly Drawing of ADNS-2001
Shown with HDNS-2100, HDNS2200, and HLMP-ED80.
Agilent provides an IGES file
drawing describing the base plate
molding features for lens and
PCB alignment. Please contact
sales representative or visit our
web site. Also, see HDNS-2100
Technical Data Sheet for more
information.
+x
19.10
(0.752)
+y
BASE PLATE
ESD LENS RING
PLASTIC SPRING
14.58
(0.574)
13.82
(0.544)
10.58
(0.417)
SURFACE IS 0 REF.
7.45
(0.293)
SENSOR
PCB
Figure 3.
3
CLIP
BASE PLATE
ALIGNMENT POST
Exploded View Drawing
HDNS-2200 (CLIP)
HLMP-ED80 (LED)
ADNS-2001 (SENSOR)
CUSTOMER SUPPLIED PCB
HDNS-2100 (LENS)
CUSTOMER SUPPLIED BASE PLATE
WITH RECOMMENDED ALIGNMENT
FEATURES PER IGES DRAWING
Figure 4.
Typical Application using PS/2 Output
18 MHz Operation for generic PS/2
compatibility
3.3 V
REGULATOR
LP2950ACZ-3.3
1.0 µF
R1
0.1 µF
13
14
PS/2
CONNECTOR
+5 V (4)
5
6
CLK (5)
4
DATA (1)
3
1
2
2
1
16
3
GND (3)
BUTTONS
R
M
L
7
VDD3
8
REFB
VDD5
0.1 µF
VDD5
HLMP-ED80
MODE/XA
PS2_C
XY_LED
PS2_D
RB
OSC1
ADNS
2001
4 MB
5
LB
GND
10
6
SURFACE
2N3904
9
18.432 MHz
OSC2
NRESET
GND
12
11
15
18.432 MHz CERAMIC RESONATOR SUCH AS
AVX
KBR-18-432-MSA or
MURATA CSA18.432MXZ040
0.22 µF
INTERNAL
IMAGE
SENSOR
HDNS-2100
LENS
Note:
0.1 µF between pins 7 and 8 must be ceraminc, and must be trace lengths less than 5 mm.
4
Typical USB Application using
Quadrature Output
18 or 24 MHz Operation
2N3906
2.7 Ω
3.3 V
REGULATOR
LP2950ACZ-3.3
1.0 µF
0.1 µF
1.5 MΩ
4.7 µF
0.1 µF
R1
7
VDD3
8
REFB
7.5 KΩ
9
12
CEXT VDD
0.33 µF
VDD
13 D–
14 D+
D–
D+
10
GND
SHLD
13
5
P1.0
CYPRESS
CY7C63000A-PC
XTALIN
6 MHz
14
2
P0.0 1
3
P0.2
4
P0.3
16
P1.1
P0.2 15
3 XB
4 YB
BUTTONS L
R
5
HLMP-ED80
MODE/XA
XY_LED
ADNS
2001
YA
15 NRESET
OSC1
6
M
7
8
18
12
OSC2
1
6
SURFACE
2N3904
9
24.00 MHz
GND GND PS2_C PS2_D
10
P0.4 P0.5 P1.2 VSS VPP P0.7 P0.6
19
VDD5
P0.1 2
11 XTALOUT
20
VDD5
0.1 µF
11
24.00 MHz CERAMIC RESONATOR
SUCH AS:
AVX
KBR-24.00MSA or
MURATA CSA24.00MXZ040
16
17
PANASONIC
EVQ SERIES
ENCODER
INTERNAL
IMAGE
SENSOR
HDNS-2100
LENS
Notes:
1. Due to the Cypress implementation of USB suspend mode support, the NRESET pin of the ADNS-2001 must be reset using a line from the Cypress
chip. The reason for this is that the Cypress chip does not configure the port input pins until after it has received a bus reset from the USB port.
The unconfigured input port pins present a 16 KΩ pullup to VCC. If a cap is used on NRESET (pin 15), this pullup will result in the ADNS-2001
seeing a high on the MODE pin and powering up in the PS/2 mode.
2. The quadrature input pins of the Cypress part must be programmed to be Hi-Z, instead of the normal current pulldowns. This ensures that the
ADNS-2001 will be able to pull the quadrature lines high over all conditions of voltage and temperature.
3. 0.1 µF between pins 7 and 8 must be ceramic, and must be trace lengths less than 5 mm.
5
Recommended LED Bin Table
LED Bin
Category
K
L
M
N
P
Q
R
S
T
R1 Value
69.8 Ω
69.8 Ω
69.8 Ω
69.8 Ω
69.8 – 78.7 Ω
69.8 – 93.1 Ω
69.8 – 113 Ω
69.8 – 137 Ω
69.8 – 169 Ω
The 69.8 Ω resistor is determined by the absolute maximum rating of 50 mA for the
HLMP-ED80. The other resistor values for brighter bins will guarantee good signals
with reduced power.
For the IEC 60825-1 eye safety consideration, please contact sales representative for
the technical report.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Solder Temperature
Symbol
TS
TA
Supply Voltage
Supply Voltage
ESD
Input Voltage
Input Voltage
VDD3
VDD5
6
Vin
Vin
Min.
–40
0
–0.5
–0.5
–0.5
–0.5
Max.
85
40
260
Units
˚C
˚C
˚C
3.6
5.5
2
VDD5 + 0.5
VDD3 + 0.5
V
V
kV
V
V
Notes
For 10 seconds, 1.6 mm below seating
plane (see HLMP-ED80 data sheet for
LED solder specifications)
All pins, Human Body Model
All I/O except OSC1 and OSC2
OSC1 and OSC2
Recommended Operating Conditions
Parameter
Operating Temperature
Supply Voltage
Supply Voltage
Clock Frequency
Symbol
TA
VDD3
VDD5
CLK
Resonator Impedance
Reset Capacitor
Distance from Lens Reference
Plane to Surface
Speed
XRES
CRESET
A
Acceleration
ACC
Light Level onto IC
IRRINC
S
Min.
0
3.15
4.25
23.88
17.4
Max.
40
3.45
5.5
24.12
18.7
40
10.0
2.5
Units
˚C
V
V
MHz
0
0
0
16
39
0.2
in/sec
cm/sec
g
2500
0
mW/m^2
40
0.001
2.3
Typ.
3.3
5.0
24.00
18.432
0.22
2.4
Ω
µF
mm
Notes
Set by ceramic resonator
For generic PS/2 operation
Dimension A on HDNS-2100
data sheet
λ = 639 nm
DC Electrical Specifications
Electrical Characteristics over recommended operating conditions. Typical values at 25˚C, VDD3 = 3.3, VDD5 = 5.0,
Clock = 24 MHz.
Parameter
Symbol
Supply Current (Mouse Moving)
IDD3
Supply Current (Mouse Moving)
IDD5
Supply Current (Mouse Not Moving) IDD5
Input Low Voltage
VIL
Input High Voltage
VIH
Output Low Voltage (LED)
VOL
Output Low Voltage (XA, XB, YA, YB) VOL
Output High Current (XA, XB, YA, YB) IOH
Output High Current (LED)
IOHBD
Input Pullup (RB, MB, LB)
I PU
Output Low Voltage (PS/2)
VOL
Output Pullup Current (PS/2)
IOH
Reset Pullup Current
IRESET
7
Min.
Typ.
12.1
6.1
2.5
Max.
20.1
12.4
0.8
2
0.3
100
1.5
100
300
5
300
3.1
300
0.41
625
10
0.5
0.5
600
6
600
0.5
1500
20
Units
mA
mA
mA
V
V
V
V
µA
mA
µA
V
µA
µA
Notes
Pin 6 = 0.6 V
Pin 6 = 0.6 V
IOL = 2 mA
IOL = 4 mA
VOH = 2.1 V
VBE = 0.6 V
VIN = 0.8 V
IOL = 10 mA
VOH = 2.0 V
VNRESET = 2.0 V
I/O Specifications
PS/2 Command Set Implementation
The following commands are implemented. All other commands will cause an FE (resend) response from the
ADNS-2001. A second invalid command will cause an FC (error) response from the ADNS-2001.
Mnemonic for
Command
RESET
RESEND
Hex Command
and Response
Bytes
FF FA AA 00
FE nn...
Mnemonics for
Command and
Response Bytes
FF ACK ID DT
FE nn...
SET_DFS
DISABLE
ENABLE
SET_SAMPLING
F6 FA
F5 FA
F4 FA
F3 FA nn FA
F6 ACK
F5 ACK
F4 ACK
F3 ACK nn ACK
READ_DT
ECHO
F2 FA 00
EE FA
F2 ACK DT
EE ACK
NO_ECHO
EC FA
EC ACK
READ_DATA
EB FA nn nn nn
EB ACK nn nn nn
SET_STREAM
EA FA
EA ACK
SET_PROMPT
F0 FA
F0 ACK
STATUS
E9 FA nn nn nn
E9 ACK nn nn nn
Respond with data packets
at the sample rate
Data only sent on
READ_DATA
Request status packet
SET_SCALE
LIN_SCALE
SET_RES
E7 FA
E6 FA
E8 FA nn FA
E7 ACK
E6 ACK
E8 ACK nn ACK
Pseudo log
Linear
Set resolution
DISABLE_TEST
E8 FA AA FA
E8 ACK AA RESEND
For test purposes only
8
Description
Soft reset ID = AA, DT = 0
Resend last byte (i.e., ACK)
or packet
Default setting
Disable stream mode
Enable stream mode
Set sampling rate
Responds with DT = 00
Echo all further commands
until NO_ECHO or RESET
Respond to following
commands normally
Request a data packet
Valid Values
and Default Value
after Software or
Hardware Reset
(default mode)
(0A 14 28 3C 50 64 C8)
10 20 40 60 80 100 120
reports/second
See IBM PS/2 Mouse
Technical Reference
(default mode)
See IBM PS/2 Mouse
Technical Reference
(default mode)
(00 01 02 03)
2 4 8 16 counts/mm)
Default mode after
hardware reset
PS/2 Mode Output Waveforms @ 24 MHz
Host Sending Data Timing Diagram
I/O
INHIBIT
CLK
1ST
CLK
2ND
CLK
9TH
CLK
10TH
CLK
11TH
CLK
(5)
T1
T2
(3)
T3
DATA
START BIT
(1)
BIT 0
PARITY BIT
(2)
(2)
STOP
BIT
(4)
Notes:
1. The mouse checks the DATA line. If the line is low, the system has data to transmit. The DATA line is set inactive when the start bit (always 0) is
placed on the DATA line.
2. The mouse samples the DATA line for each bit while the CLK line is high. Data must be stable within 1 microsecond after the rising edge of the
CLK line.
3. The mouse checks for a high stop bit after the 10th CLK. If the DATA line is low, the mouse continues to clock until the DATA line becomes high,
then clocks the line-control bit, and at the next opportunity sends a Resend command to the system.
4. The mouse pulls the DATA line low, producing the line-control bit.
5. The host can pull the CLK line low, inhibiting the mouse.
Timing Parameter
T1
T2
T3
Description
Duration of CLK high
Duration of CLK low
Time from falling CLK transition, to date transition
Min. Time
22.5 µsec
22.5 µsec
0 µsec
Max. Time
37.5 µsec
37.5 µsec
22.5 µsec
Host Receiving Timing Diagram
1ST
CLK
CLK
2ND
CLK
T3
T1
DATA
3RD
CLK
10TH
CLK
11TH
CLK
(1, 2)
T4
T5
T2
START BIT
BIT 0
BIT 1
BIT 2
PARITY BIT
STOP BIT
Notes:
1. The host can hold the clock signal low to inhibit the next transmission.
2. The host raises the clock line to allow the next transmission.
3. All times given below assume a 24 MHz resonator and are dependent upon its accuracy.
Timing Parameter
T1
T2
T3
T4
T5
9
Description
Time from DATA transition to falling edge of CLK
Time from rising edge of CLK to DATA transition
Duration of CLK low
Duration of CLK high
Time to mouse inhibit after clock 11 to ensure the
mouse does not start another transmission
Min. Time
3.75 µsec
3.75 µsec
22.5 µsec
22.5 µsec
0 µsec
Max. Time
18.75 µsec
18.75 µsec
37.5 µsec
37.5 µsec
37.5 µsec
Quadrature Output Mode Waveform
@ 24 MHz
The 2 channel quadrature outputs
are 5 V CMOS outputs. The Delta
X count is used to generate the
XA and XB quadrature signals.
The Delta Y count is used to generate the YA and YB quadrature
signals. Delta X, Y counts are in
the range of +7 to –7 counts of
motion and new Delta X, Y values
are generated at a rate of 2000
Hz. The quadrature signals can
change at a maximum rate of
16.7 kHz.
XB
XA
60 µs
60 µs
60 µs
60 µs
60 µs
60 µs
Example: Quadrature Output Waveform (+X motion).
AC Electrical Specifications
Electrical Characteristics over recommended operating conditions. Typical values at 25˚C, VDD3 = 3.3, VDD5 = 5.0,
A = 2.4 mm, CLK = 24.00 MHz.
Parameter
PS/2 Baud Rate
PS/2 Data Transition Delay
after PS/2_C Rising Edge
PS/2 Motion Report Rates
Motion Scale Factor
Power Up Delay
10
Symbol
Fps2
T2
Min.
13.3
7.5
Typ.
16.7
15
Max.
20
18.8
Units
Kbaud
µs
100
reports/sec
counts/inch
ms
133
400
Notes
See PS/2 timing diagrams
See PS/2 command settings
CRESET = 0.22 µF
Typical Performance Characteristics
Typical Performance of ADNS-2001
assembled as shown in Figure 3 with
HDNS-2100 Lens, HDNS-2200 LED
Assembly Clip and HLMP-ED80.
10
AVERAGE ERROR (% OF TRAVEL)
RESOLUTION (COUNTS/INCH)
450
400
350
300
250
RECOMMENDED
DISTANCE FROM
LENS FOOT
REFERENCE
PLANE
TO SURFACE
200
150
100
50
0
2.0
2.2
2.4
2.6
2.8
3.0
DISTANCE FROM HDNS-2100 LENS FOOT
REFERENCE PLANE TO SURFACE (mm)
WHITE LAMINATED
DESKTOP
5
4
WOOD (WALNUT)
3
2
1
BLACK CLOTH
MOUSE PAD
2.2
2.6
2.4
2.8
3.0
3.2
Figure 6. Typical error vs. assembly.
TRAVEL IN y DIRECTION (mm)
RELATIVE RESPONSIVITY
6
70
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
500
600
700
800
900
1000
WAVELENGTH (nm)
Figure 7. Typical responsivity vs. wavelength.
Note:
Due to the higher flame speed, any shorter
wavelength LED other than HLMP-ED80 is not
recommended.
11
PAPER
FILE FOLDER
DISTANCE FROM HDNS-2100 LENS FOOT
REFERENCE PLANE TO SURFACE (mm)
1.0
0
400
8
7
0
2.0
3.2
Figure 5. Typical resolution vs. assembly height.
RECOMMENDED
OPERATING REGION
9
60
57
TRUE
50
REPORTED
40
30
20
10
0
0
10
20
30
40
50
60
70
TRAVEL IN x DIRECTION (mm)
Figure 8. Typical reported path vs. true path.
Ordering Information
Specify Part Number as follows:
ADNS-2001 = Sensor IC in a 16-pin optical plastic package, 20 per
tube, 1000 pieces in a box.
ADNB-2012 = ADNS-2001 Sensor and HDNS-2100 Round Lens
Bundle Kit, 1000 pieces incremental (e.g., ADNB-2012:
1000 pieces = 1000 pieces of ADNS-2001 and 1000
pieces of HDNS-2100 in a box).
ADNB-2013 = ADNS-2001 Sensor and HDNS-2100 #001 Trimmed
Lens Bundle Kit, 1000 pieces incremental (e.g., ADNB2013: 1000 pieces = 1000 pieces of ADNS-2001 and
1000 pieces of HDNS-2100 #001 in a box).
HDNS-2100 = Round Optical Mouse Lens
HDNS-2101-001 = Trimmed Optical Mouse Lens
HDNS-2200 = LED Assembly Clip (Black)
HDNS-2200-001 = LED Clip (Clear)
HLMP-ED80 = LED
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
May 10, 2004
5988-2793EN
Similar pages