MEANWELL ADS-5524

ADS-55
55W Single Output with 5V,4A DC-DC Converter
series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 45KHz
2 years warranty
SPECIFICATION
ADS-5512
MODEL
OUTPUT
INPUT
CH1
CH2
CH1
CH2
DC VOLTAGE
12V
5V
24V
5V
RATED CURRENT
3A
3A
2A
2A
CURRENT RANGE
0 ~ 4A
0 ~ 4A
0 ~ 2.5A
0 ~ 4A
RATED POWER
51W
3.0%
1.0%
3.0%
0.5%
0.5%
1.0%
0.5%
LOAD REGULATION
0.5%
0.5%
1.0%
0.5%
SETUP, RISE TIME
1400ms, 50ms/230VAC
HOLD UP TIME (Typ.)
80ms/230VAC
VOLTAGE RANGE
88 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
3300ms, 50ms/115VAC at full load
16ms/115VAC at full load
124 ~ 370VDC
EFFICIENCY (Typ.)
76%
AC CURRENT (Typ.)
1.6A/115VAC
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
COLD START 20A/115VAC
40A/230VAC
<1mA / 240VAC
105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
CH1:27.6 ~ 32.4V
CH1:13.8 ~ 16.2V
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
79%
1A/230VAC
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.03%/ (0~50 ) on CH1 output
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
100mVp-p
1.0%
WORKING TEMP.
OTHERS
100mVp-p
CH1:21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3
OVER VOLTAGE
(Note 4)
100mVp-p
CH1:10.8 ~ 13.2V
LINE REGULATION
OVERLOAD
EMC
58W
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE ADJ. RANGE
PROTECTION
SAFETY &
ADS-5524
OUTPUT NUMBER
/ 70% RH
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
276.3K hrs min. MIL-HDBK-217F (25
159*97*38mm (L*W*H)
0.57Kg; 24pcs/13.7Kg/0.75CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
File Name:ADS-55-SPEC 2010-10-18
ADS-55
55W Single Output with 5V,4A DC-DC Converter
Mechanical Specification
Case No. 901
4.5
series
Unit:mm
3.5
7
152.5
1
65
8.25
2
84.5
4
5
2-M
6.5
6
97
3
3
7
8
3.5
4.5
78
24
159
150
Terminal Pin No. Assignment :
22
Assignment
Assignment
Pin No.
Pin No.
AC/L
DC OUTPUT +V
1
5
AC/N
NC
2
6
8
3
FG
DC/DC OUTPUT +5V
4,7
DC OUTPUT COM
38
3.5
M3
28.5
3.5
3-
18
18.5
9
9
6.5
117
Block Diagram
fosc : 45KHz
SWITCHING
REGULATOR
RECTIFIERS
&
FILTER
EMI
FILTER
I/P
+5V
RECTIFIERS
&
FILTER
POWER
SWITCHING
+V
COM
FG
O.L.P.
PWM
CONTROL
Derating Curve
DETECTION
CIRCUIT
Static Characteristics (5512)
Ta=25
100
OUTPUT VOLTAGE (V)
+12V
With 18.2CFM min.(10cm)
80
70
LOAD (%)
60
50
NO FAN
40
20
-10
300
5.2
0
10
20
30
40
50
AMBIENT TEMPERATURE ( )
60
(HORIZONTAL)
11
250
5.0
+5V
10
4.8
200
9
4.6
150
8
4.4
100
7
4.2
+12V
50
6
4.0
+5V
25
60
80
100
120
140
160
180
200
220
240
OUTPUT RIPPLE (mVp-p)
12
260
INPUT VOLTAGE (V) 60Hz
File Name:ADS-55-SPEC 2010-10-18