AD ADXRS620WBBGZA-RL ±300â°/sec yaw rate gyro Datasheet

±300°/sec Yaw Rate Gyro
ADXRS620
FEATURES
GENERAL DESCRIPTION
Complete rate gyroscope on a single chip
Z-axis (yaw rate) response
High vibration rejection over wide frequency
2000 g powered shock survivability
Ratiometric to referenced supply
5 V single-supply operation
105°C operation
Self-test on digital command
Ultrasmall and light (<0.15 cc, <0.5 gram)
Temperature sensor output
RoHS compliant
The ADXRS620 is a complete angular rate sensor (gyroscope)
that uses the Analog Devices, Inc., surface-micromachining
process to create a functionally complete and low cost angular
rate sensor integrated with all required electronics on one chip.
The manufacturing technique for this device is the same high
volume BiMOS process that is used for high reliability automotive
airbag accelerometers.
The output signal, RATEOUT (1B, 2A), is a voltage that is
proportional to angular rate about the axis normal to the top
surface of the package. The output is ratiometric with respect
to a provided reference supply. An external capacitor sets the
bandwidth. Other external capacitors are required for operation.
APPLICATIONS
Vehicle chassis rollover sensing
Inertial measurement units
Platform stabilization
A temperature output is provided for compensation techniques.
Two digital self-test inputs electromechanically excite the sensor
to test proper operation of both the sensor and the signal conditioning circuits. The ADXRS620 is available in a 7 mm × 7 mm ×
3 mm BGA ceramic package.
FUNCTIONAL BLOCK DIAGRAM
+5V
(ADC REF)
+5V
ST2
AVCC
100nF
ST1
TEMP
SELF-TEST
25kΩ
@ 25°C
VRATIO
100nF
ADXRS620
25kΩ
AGND
DEMOD
MECHANICAL
SENSOR
DRIVE
AMP
+5V
AC
AMP
VGA
180kΩ ±1%
VDD
CHARGE PUMP
AND VOLTAGE
REGULATOR
100nF
PGND
SUMJ
RATEOUT
100nF
22nF
22nF
COUT
08887-001
CP1 CP2 CP3 CP4 CP5
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
ADXRS620
TABLE OF CONTENTS
Features .............................................................................................. 1
Theory of Operation .........................................................................9
Applications ....................................................................................... 1
Setting Bandwidth .........................................................................9
General Description ......................................................................... 1
Temperature Output and Calibration .........................................9
Functional Block Diagram .............................................................. 1
Calibrated Performance................................................................9
Revision History ............................................................................... 2
ADXRS620 and Supply Ratiometricity ................................... 10
Specifications..................................................................................... 3
Null Adjustment ......................................................................... 10
Absolute Maximum Ratings............................................................ 4
Self-Test Function ...................................................................... 10
Rate Sensitive Axis ....................................................................... 4
Continuous Self-Test.................................................................. 10
ESD Caution .................................................................................. 4
Outline Dimensions ....................................................................... 11
Pin Configuration and Function Descriptions ............................. 5
Ordering Guide .......................................................................... 11
Typical Performance Characteristics ............................................. 6
REVISION HISTORY
3/10—Revision 0: Initial Version
Rev. 0 | Page 2 of 12
ADXRS620
SPECIFICATIONS
All minimum and maximum specifications are guaranteed. Typical specifications are not guaranteed. TA = −40°C to +105°C, VS = AVCC =
VDD = 5 V, VRATIO = AVCC, angular rate = 0°/sec, bandwidth = 80 Hz (COUT = 0.01 μF), IOUT = 100 μA, ±1 g, unless otherwise noted.
Table 1.
Parameter
SENSITIVITY 1
Measurement Range 2
Initial and Over Temperature
Temperature Drift 3
Nonlinearity
NULL1
Null
Linear Acceleration Effect
NOISE PERFORMANCE
Rate Noise Density
FREQUENCY RESPONSE
Bandwidth 4
Sensor Resonant Frequency
SELF-TEST1
ST1 RATEOUT Response
ST2 RATEOUT Response
ST1 to ST2 Mismatch 5
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Impedance
TEMPERATURE SENSOR1
VOUT at 25°C
Scale Factor 6
Load to VS
Load to Common
TURN-ON TIME
OUTPUT DRIVE CAPABILITY
Current Drive
Capacitive Load Drive
POWER SUPPLY
Operating Voltage (VS)
Quiescent Supply Current
TEMPERATURE RANGE
Specified Performance
Conditions
Clockwise rotation is positive output
Full-scale range over specifications range
−40°C to +105°C
Min
±300
5.52
Best fit straight line
−40°C to +105°C
Any axis
2.2
TA ≤ 25°C
Typ
Max
6
±2
0.1
6.48
2.5
0.1
2.8
0.05
0.01
12
14.5
ST1 pin from Logic 0 to Logic 1
ST2 pin from Logic 0 to Logic 1
−650
250
−5
3.3
−450
450
To common
40
50
Load = 10 MΩ
@ 25°C, VRATIO = 5 V
2.35
2.5
9
25
25
Unit
°/sec
mV/°/sec
%
% of FS
V
°/sec/g
°/sec/√Hz
2500
17
Hz
kHz
−250
650
+5
mV
mV
%
V
V
kΩ
1.7
100
Power on to ±½°/sec of final
50
V
mV/°C
kΩ
kΩ
ms
For rated specifications
200
1000
μA
pF
5.25
4.5
V
mA
+105
°C
4.75
−40
1
5.00
3.5
2.65
Parameter is linearly ratiometric with VRATIO.
The maximum range possible, including output swing range, initial offset, sensitivity, offset drift, and sensitivity drift at 5 V supplies.
3
From +25°C to −40°C or from +25°C to 105°C.
4
Adjusted by external capacitor, COUT. Reducing bandwidth below 0.01 Hz does not reduce noise further.
5
Self-test mismatch is described as (ST2 + ST1)/((ST2 − ST1)/2).
6
For a change in temperature from 25°C to 26°C. VTEMP is ratiometric to VRATIO. See the Temperature Output and Calibration section for more details.
2
Rev. 0 | Page 3 of 12
ADXRS620
ABSOLUTE MAXIMUM RATINGS
RATE SENSITIVE AXIS
Parameter
Acceleration (Any Axis, 0.5 ms)
Unpowered
Powered
VDD, AVCC
VRATIO
ST1, ST2
Output Short-Circuit Duration
(Any Pin to Common)
Operating Temperature Range
Storage Temperature Range
Rating
2000 g
2000 g
−0.3 V to +6.0 V
AVCC
AVCC
Indefinite
The ADXRS620 is a Z-axis rate-sensing device (also called
a yaw rate sensing device). It produces a positive going output
voltage for clockwise rotation about the axis normal to the
package top, that is, clockwise when looking down at the
package lid.
RATE
AXIS
RATE OUT
VCC = 5V
LONGITUDINAL
AXIS
4.75V
+
VRATIO/2
7
−55°C to +125°C
−65°C to +150°C
RATE IN
A1
ABCDE FG
LATERAL AXIS
Stresses above those listed under the Absolute Maximum
Ratings may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
1
0.25V
GND
Figure 2. RATEOUT Signal Increases with Clockwise Rotation
ESD CAUTION
Drops onto hard surfaces can cause shocks of greater than
2000 g and can exceed the absolute maximum rating of the
device. Exercise care during handling to avoid damage.
Rev. 0 | Page 4 of 12
08887-002
Table 2.
ADXRS620
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
VDD
PGND
CP5
CP3
CP4
7
6
ST1
CP1
5
ST2
CP2
4
AVCC
3
TEMP
2
AGND
G
F
VRATIO
NC
SUMJ
E
D
C
RATEOUT
B
A
08887-003
1
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
6D, 7D
6A, 7B
6C, 7C
5A, 5B
4A, 4B
3A, 3B
1B, 2A
1C, 2C
1D, 2D
1E, 2E
1F, 2G
3F, 3G
4F, 4G
5F, 5G
6G, 7F
6E, 7E
Mnemonic
CP5
CP4
CP3
CP1
CP2
AVCC
RATEOUT
SUMJ
NC
VRATIO
AGND
TEMP
ST2
ST1
PGND
VDD
Description
HV Filter Capacitor (0.1 μF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Positive Analog Supply.
Rate Signal Output.
Output Amp Summing Junction.
No Connect.
Reference Supply for Ratiometric Output.
Analog Supply Return.
Temperature Voltage Output.
Self-Test for Sensor 2.
Self-Test for Sensor 1.
Charge Pump Supply Return.
Positive Charge Pump Supply.
Rev. 0 | Page 5 of 12
ADXRS620
TYPICAL PERFORMANCE CHARACTERISTICS
N > 1000 for all typical performance plots, unless otherwise noted.
20
30
PERCENTAGE OF POPULATION (%)
PERCENTAGE OF POPULATION (%)
18
16
14
12
10
8
6
4
25
20
15
10
5
2.80
RATE OUT (V)
08887-004
2.75
2.70
2.65
2.60
2.55
2.50
2.45
2.40
2.35
2.30
2.25
0
2.20
0
–10
–4
–2
0
2
4
6
8
10
Figure 7. Sensitivity Drift over Temperature
35
PERCENTAGE OF POPULATION (%)
40
35
30
25
20
15
10
5
–0.2 –0.1
0
0.1
0.2
0.3
0.4
0.5
(°/sec°/C)
25
20
15
10
5
0
–650 –610 –570 –530 –490 –450 –410 –370 –330 –290 –250
ST1 Δ (mV)
Figure 8. ST1 Output Change at 25°C (VRATIO = 5 V)
Figure 5. Null Drift over Temperature (VRATIO = 5 V)
40
14
35
PERCENTAGE OF POPULATION (%)
16
12
10
8
6
4
0
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
SENSITIVITY (mV/°/sec)
6.4
6.5
25
20
15
10
5
0
08887-006
2
30
250
290
330
370
410
450
490
530
570
610
ST2 Δ (mV)
Figure 6. Sensitivity at 25°C (VRATIO = 5 V)
Figure 9. ST2 Output Change at 25°C (VRATIO = 5 V)
Rev. 0 | Page 6 of 12
650
08887-009
–0.4 –0.3
08887-005
0
–0.5
30
08887-008
45
PERCENTAGE OF POPULATION (%)
–6
DRIFT (%)
Figure 4. Null Output at 25°C (VRATIO = 5 V)
% OF POPULATION
–8
08887-007
2
70
40
60
35
50
40
30
20
0
–5
–4
–3
–2
–1
0
1
2
3
4
5
SELF-TEST MISMATCH (%)
25
20
15
10
5
0
08887-010
10
30
2.40 2.42 2.44 2.46 2.48 2.50 2.52 2.54 2.56 2.58 2.60
VOLTAGE (V)
08887-015
PERCENTAGE OF POPULATION (%)
PERCENTAGE OF POPULATION (%)
ADXRS620
Figure 13. VTEMP Output at 25°C (VRATIO = 5 V)
Figure 10. Self-Test Mismatch at 25°C (VRATIO = 5 V)
600
3.3
3.1
400
ST2
200
2.7
VOLTAGE (V)
SELF-TEST Δ (mV)
2.9
0
–200
2.5
2.3
2.1
1.9
–400
ST1
1.7
0
20
40
60
80
100
120
TEMPERATURE (°C)
1.5
–40
08887-011
–20
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
Figure 11. Typical Self-Test Change over Temperature
08887-013
256 PARTS
–600
–40
Figure 14. VTEMP Output over Temperature (VRATIO = 5 V)
30
60
25
Y
X
40
g OR °/sec
20
15
10
+45°
–45°
30
20
10
0
5
–20
750
0
2.5
2.7
2.9
3.1
3.3
3.5
3.7
3.9
4.1
4.3
CURRENT CONSUMPTION (m A)
4.5
770
790
810
830
TIME (ms)
Figure 12. Current Consumption at 25°C (VRATIO = 5 V)
Figure 15. g and g × g Sensitivity for a 50 g, 10 ms Pulse
Rev. 0 | Page 7 of 12
850
08887-014
–10
08887-012
PERCENTAGE OF POPULATION (%)
REF
50
ADXRS620
0.10
2.0
LAT
LONG
RATE
1.8
RATE OF ROTATION (°/sec)
PEAK RATEOUT (°/s)
1.6
1.4
1.2
1.0
0.8
0.6
0.05
0
–0.05
0.4
1k
FREQUENCY (Hz)
10k
–0.10
08887-116
0
100
0
20
40
60
80
100
120
140
TIME (Hours)
08887-018
0.2
Figure 19. Typical Shift in 90 sec Null Averages Accumulated
over 140 Hours
Figure 16. Typical Response to 10 g Sinusoidal Vibration
(Sensor Bandwidth = 2 kHz)
0.10
400
DUT1 OFFSET BY +200°/sec
200
RATE OF ROTATION (°/sec)
RATE OF ROTATION (°/sec)
300
100
0
–100
DUT2 OFFSET BY –200°/sec
–200
0.05
0
–0.05
0
50
100
150
200
250
TIME (ms)
–0.10
08887-016
1200
1800
2400
3000
3600
Figure 20. Typical Shift in Short-Term Null (Bandwidth = 1 Hz)
0.1
NOISE SPECTRAL DENSITY(°/sec/√Hz rms)
1
0.1
0.01
0.1
1
10
100
1k
10k
100k
AVERAGE TIME (Seconds)
0.01
0.001
0.0001
10
08887-017
ROOT ALLAN DEVIATION (°/sec rms)
600
TIME (Seconds)
Figure 17. Typical High g (2500 g) Shock Response
(Sensor Bandwidth = 40 Hz)
0.001
0.01
0
100
1k
10k
100k
FREQUENCY (Hz)
Figure 21. Typical Noise Spectral Density (Bandwidth = 40 Hz)
Figure 18. Typical Root Allan Deviation at 25°C vs. Averaging Time
Rev. 0 | Page 8 of 12
08887-020
–400
08887-019
–300
ADXRS620
THEORY OF OPERATION
SETTING BANDWIDTH
External Capacitor COUT is used in combination with the onchip ROUT resistor to create a low-pass filter to limit the
bandwidth of the ADXRS620 rate response. The −3 dB
frequency set by ROUT and COUT is
fOUT =
1
(2 × π × ROUT × COUT )
This frequency can be well controlled because ROUT has been
trimmed during manufacturing to be 180 kΩ ± 1%. Any
external resistor applied between the RATEOUT pin (1B, 2A)
and SUMJ pin (1C, 2C) results in
(180 kΩ × REXT )
ROUT =
(180 kΩ + REXT )
0.1
0.01
0.001
0.0001
0.000001
10
100
10k
1k
100k
FREQUENCY (Hz)
08887-021
0.00001
Figure 22. Noise Spectral Density with Additional 250 Hz Filter
TEMPERATURE OUTPUT AND CALIBRATION
It is common practice to temperature-calibrate gyros to improve
their overall accuracy. The ADXRS620 has a temperature proportional voltage output that provides input to such a calibration
method. The temperature sensor structure is shown in Figure 23.
The temperature output is characteristically nonlinear, and any
load resistance connected to the TEMP output results in decreasing
the TEMP output and temperature coefficient. Therefore, buffering the output is recommended.
The voltage at the TEMP pin (3F, 3G) is nominally 2.5 V at 25°C,
and VRATIO = 5 V. The temperature coefficient is ~9 mV/°C at
25°C. Although the TEMP output is highly repeatable, it has
only modest absolute accuracy.
VRATIO
RFIXED
VTEMP
RTEMP
08887-022
The electrostatic resonator requires 18 V to 20 V for operation.
Because only 5 V are typically available in most applications,
a charge pump is included on chip. If an external 18 V to 20 V
supply is available, the two capacitors on CP1 through CP4 can
be omitted and this supply can be connected to CP5 (Pin 6D,
Pin 7D). Note that CP5 should not be grounded when power is
applied to the ADXRS620. Although no damage occurs, under
certain conditions the charge pump may fail to start up after the
ground is removed without first removing power from the
ADXRS620.
Figure 22 shows the effect of adding a 250 Hz filter to the output
of an ADXRS620 set to 40 Hz bandwidth (as shown in Figure 21).
High frequency demodulation artifacts are attenuated by
approximately 18 dB.
NOISE SPECTRAL DENSITY(°/sec/√Hz rms)
The ADXRS620 operates on the principle of a resonator gyro.
Two polysilicon sensing structures each contain a dither frame
that is electrostatically driven to resonance, producing the
necessary velocity element to produce a Coriolis force during
angular rate. At two of the outer extremes of each frame,
orthogonal to the dither motion, are movable fingers that are
placed between fixed pickoff fingers to form a capacitive pickoff
structure that senses Coriolis motion. The resulting signal is fed
to a series of gain and demodulation stages that produces the
electrical rate signal output. The dual-sensor design rejects
external g-forces and vibration. Fabricating the sensor with the
signal conditioning electronics preserves signal integrity in
noisy environments.
Figure 23. Temperature Sensor Structure
CALIBRATED PERFORMANCE
In general, an additional hardware or software filter is added
to attenuate high frequency noise arising from demodulation
spikes at the gyro’s 14 kHz resonant frequency. (The noise spikes
at 14 kHz can be clearly seen in the power spectral density curve
shown in Figure 21). Typically, this additional filter’s corner
frequency is set to greater than 5× the required bandwidth to
preserve good phase response.
Using a three-point calibration technique, it is possible to
calibrate the null and sensitivity drift of the ADXRS620 to
an overall accuracy of nearly 200°/hour. An overall accuracy
of 40°/hour or better is possible using more points.
Limiting the bandwidth of the device reduces the flat-band
noise during the calibration process, improving the measurement accuracy at each calibration point.
Rev. 0 | Page 9 of 12
ADXRS620
ADXRS620 AND SUPPLY RATIOMETRICITY
NULL ADJUSTMENT
The ADXRS620 RATEOUT and TEMP signals are ratiometric
to the VRATIO voltage, that is, the null voltage, rate sensitivity, and
temperature outputs are proportional to VRATIO. Thus, the
ADXRS620 is most easily used with a supply-ratiometric ADC
that results in self-cancellation of errors due to minor supply
variations. There is some small error due to nonratiometric
behavior. Typical ratiometricity error for null, sensitivity, selftest, and temperature output is outlined in Table 4.
The nominal 2.5 V null is for a symmetrical swing range at
RATEOUT (1B, 2A). However, a nonsymmetrical output swing
may be suitable in some applications. Null adjustment is possible
by injecting a suitable current to SUMJ (1C, 2C). Note that supply
disturbances may reflect some null instability. Digital supply
noise should be avoided, particularly in this case.
Note that VRATIO must never be greater than AVCC.
Table 4. Ratiometricity Error for Various Parameters
Parameter
ST1
Mean
Sigma
ST2
Mean
Sigma
Null
Mean
Sigma
Sensitivity
Mean
Sigma
VTEMP
Mean
Sigma
VS = VRATIO = 4.85 V
VS = VRATIO = 5.15 V
0.3%
0.21%
0.09%
0.19%
−0.15%
0.22%
−0.2%
0.2%
−0.3%
0.2%
−0.05%
0.08%
0.003%
0.06%
−0.25%
0.06%
−0.2%
0.05%
−0.04%
0.06%
SELF-TEST FUNCTION
The ADXRS620 includes a self-test feature that actuates each of
the sensing structures and associated electronics as if subjected
to angular rate. It is activated by standard logic high levels applied
to Input ST1 (5F, 5G), Input ST2 (4F, 4G), or both. ST1 causes
the voltage at RATEOUT to change about −0.450 V, and ST2
causes an opposite change of +0.450 V. The self-test response
follows the viscosity temperature dependence of the package
atmosphere, approximately 0.25%/°C.
Activating both ST1 and ST2 simultaneously is not damaging.
ST1 and ST2 are fairly closely matched (±5%), but actuating
both simultaneously may result in a small apparent null bias
shift proportional to the degree of self-test mismatch.
ST1 and ST2 are activated by applying a voltage equal to VRATIO
to the ST1 and ST2 pins. The voltage applied to ST1 and ST2
must never be greater than AVCC.
CONTINUOUS SELF-TEST
The on-chip integration of the ADXRS620 gives it higher reliability
than is obtainable with any other high volume manufacturing
method. In addition, it is manufactured under a mature BiMOS
process with field-proven reliability. As an additional failure
detection measure, a power-on self-test can be performed.
However, some applications may warrant continuous self-test
while sensing rate. Details outlining continuous self-test techniques
are also available in the AN-768 Application Note at analog.com.
Rev. 0 | Page 10 of 12
ADXRS620
OUTLINE DIMENSIONS
A1 BALL
CORNER
7.05
6.85 SQ
6.70
7
6
5
4
3
2
*A1 CORNER
INDEX AREA
1
A
B
4.80
BSC SQ
0.80
BSC
C
D
E
F
G
TOP VIEW
BOTTOM VIEW
DETAIL A
3.80 MAX
0.60
0.55
0.50
SEATING
PLANE
3.20 MAX
2.50 MIN
COPLANARITY
0.15
BALL DIAMETER
*BALL A1 IDENTIFIER IS GOLD PLATED AND CONNECTED
TO THE D/A PAD INTERNALLY VIA HOLES.
10-26-2009-B
DETAIL A
0.60 MAX
0.25 MIN
Figure 24. 32-Lead Ceramic Ball Grid Array [CBGA]
(BG-32-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADXRS620WBBGZA
ADXRS620WBBGZA-RL
EVAL-ADXRS620Z
1
Temperature Range
–40°C to +105°C
–40°C to +105°C
Package Description
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
Evaluation Board
Z = RoHS Compliant Part.
Rev. 0 | Page 11 of 12
Package Option
BG-32-3
BG-32-3
ADXRS620
NOTES
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08887-0-3/10(0)
Rev. 0 | Page 12 of 12
Similar pages