AD ADXRS624WBBGZ-RL 50,-50/s yaw rate gyro Datasheet

±50°/s Yaw Rate Gyro
ADXRS624
FEATURES
GENERAL DESCRIPTION
Complete rate gyroscope on a single chip
Z-axis (yaw rate) response
High vibration rejection over wide frequency
2000 g powered shock survivability
Ratiometric to referenced supply
5 V single-supply operation
105°C operation
Self-test on digital command
Ultrasmall and light (<0.15 cc, <0.5 gram)
Temperature sensor output
RoHS compliant
Qualified for automotive applications
The ADXRS624 is a complete angular rate sensor (gyroscope)
that uses the Analog Devices, Inc., surface-micromachining
process to create a functionally complete and low cost angular
rate sensor integrated with all required electronics on one chip.
The manufacturing technique for this device is the same high
volume BiMOS process used for high reliability automotive
airbag accelerometers.
The output signal, RATEOUT (1B, 2A), is a voltage proportional
to angular rate about the axis normal to the top surface of the
package. The output is ratiometric with respect to a provided
reference supply. A single external resistor between SUMJ and
RATEOUT can be used to lower the scale factor. An external
capacitor sets the bandwidth. Other external capacitors are
required for operation.
APPLICATIONS
Navigation systems
Inertial measurement units
Platform stabilization
Robotics
A temperature output is provided for compensation techniques.
Two digital self-test inputs electromechanically excite the sensor
to test proper operation of both the sensor and the signal
conditioning circuits. The ADXRS624 is available in a 7 mm ×
7 mm × 3 mm BGA chip scale package.
FUNCTIONAL BLOCK DIAGRAM
+5V
(ADC REF)
100nF
+5V
ST2
ST1
TEMP
SELF-TEST
25kΩ
AT 25°C
AVCC
100nF
VRATIO
ADXRS624
ADXRS624
25kΩ
AGND
DEMOD
MECHANICAL
SENSOR
DRIVE
AMP
+5V
AC
AMP
VGA
200kΩ ±5%
VDD
CHARGE PUMP
AND VOLTAGE
REGULATOR
100nF
PGND
SUMJ
RATEOUT
100nF
22nF
22nF
COUT
08999-001
CP1 CP2 CP3 CP4 CP5
Figure 1. ADXRS624 Block Diagram
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
www.analog.com
Tel: 781.329.4700
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
ADXRS624
TABLE OF CONTENTS
Features .............................................................................................. 1
Theory of Operation .........................................................................9
Applications ....................................................................................... 1
Setting Bandwidth .........................................................................9
General Description ......................................................................... 1
Temperature Output and Calibration .........................................9
Functional Block Diagram .............................................................. 1
Calibrated Performance ................................................................9
Revision History ............................................................................... 2
ADXRS624 and Supply Ratiometricity ......................................9
Specifications..................................................................................... 3
Null Adjustment ......................................................................... 10
Absolute Maximum Ratings ............................................................ 4
Self-Test Function ...................................................................... 10
Rate-Sensitive Axis ....................................................................... 4
Continuous Self-Test.................................................................. 10
ESD Caution .................................................................................. 4
Outline Dimensions ....................................................................... 11
Pin Configuration and Function Descriptions ............................. 5
Ordering Guide .......................................................................... 11
Typical Performance Characteristics ............................................. 6
Automotive Products ................................................................. 11
REVISION HISTORY
9/10—Rev. 0 to Rev. A
Changes to Ordering Guide .......................................................... 11
4/10—Revision 0: Initial Version
Rev. A | Page 2 of 12
ADXRS624
SPECIFICATIONS
All minimum and maximum specifications are guaranteed; typical specifications are not guaranteed. At TA = −40°C to +105°C, VS = AVCC
= VDD = 5 V, VRATIO = AVCC, angular rate = 0°/s, bandwidth = 80 Hz (COUT = 0.01 µF), IOUT = 100 μA, ±1 g, unless otherwise noted.
Table 1.
Parameter
SENSITIVITY (RATIOMETRIC) 1
Measurement Range2
Initial and Over Temperature
Temperature Drift3
Nonlinearity
NULL (RATIOMETRIC)1
Null
Linear Acceleration Effect
NOISE PERFORMANCE
Rate Noise Density
FREQUENCY RESPONSE
Bandwidth4
Sensor Resonant Frequency
SELF-TEST (RATIOMETRIC)1
ST1 Rate-Out Response
ST2 Rate-Out Response
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Impedance
TEMPERATURE SENSOR (RATIOMETRIC)1
VOUT at 25°C
Scale Factor5
Load to VS
Load to Common
TURN-ON TIME
OUTPUT DRIVE CAPABILITY
Current Drive
Capacitive Load Drive
POWER SUPPLY
Operating Voltage (VS)
VRATIO Input
Supply Current
TEMPERATURE RANGE
Specified Performance
Conditions
Clockwise rotation is positive output
Full-scale range over specifications range
Min
ADXRS624BBGZ
Typ
Max
±50
22.5
Unit
Best fit straight line
±75
25
±3
0.1
−40°C to +105°C
Any axis
2.5
0.1
V
°/sec/g
TA = 25°C
0.04
°/sec/√Hz
1
27.5
1000
14.5
ST1 pin from Logic 0 to Logic 1
ST2 pin from Logic 0 to Logic 1
−1.9
1.9
0.8 × VRATIO
0.2 × VRATIO
To common
50
Load = 100 MΩ
At 25°C, VRATIO = 5 V
2.35
V
V
V
V
kΩ
Power on to ±½°/sec of final
50
For rated specifications
200
1000
µA
pF
5.25
VS
5.0
V
V
mA
+105
°C
5.00
3.5
–40
1
2.65
Hz
kHz
V
mV/°C
kΩ
kΩ
ms
4.75
3
2.5
9
25
25
°/sec
mV/°/sec
%
% of FS
Parameter is linearly ratiometric with VRATIO.
The maximum range possible, including output swing range, initial offset, sensitivity, offset drift, and sensitivity drift at 5 V supplies.
From +25°C to −40°C or from +25°C to +105°C.
4
Adjusted by the external capacitor, COUT.
5
For a change in temperature from 25°C to 26°C. VTEMP is ratiometric to VRATIO. See the Temperature Output and Calibration section for more details.
2
3
Rev. A | Page 3 of 12
ADXRS624
ABSOLUTE MAXIMUM RATINGS
RATE-SENSITIVE AXIS
Parameter
Acceleration (Any Axis, 0.5 ms)
Unpowered
Powered
VDD, AVCC
VRATIO
Output Short-Circuit Duration
(Any Pin to Common)
Operating Temperature Range
Storage Temperature
Rating
2000 g
2000 g
–0.3 V to +6.0 V
AVCC
Indefinite
–55°C to +125°C
–65°C to +150°C
Stresses above those listed under the Absolute Maximum
Ratings may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
The ADXRS624 is a Z-axis rate-sensing device (also called a
yaw rate-sensing device). It produces a positive going output
voltage for clockwise rotation about the axis normal to the
package top, that is, clockwise when looking down at the
package lid.
RATE
AXIS
RATE OUT
VCC = 5V
LONGITUDINAL
AXIS
4.75V
+
VRATIO/2
7
RATE IN
1
A1
0.25V
ABCDE FG
LATERAL AXIS
GND
Figure 2. RATEOUT Signal Increases with Clockwise Rotation
ESD CAUTION
Drops onto hard surfaces can cause shocks of greater than
2000 g and can exceed the absolute maximum rating of the
device. Exercise care during handling to avoid damage.
Rev. A | Page 4 of 12
08999-002
Table 2.
ADXRS624
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
VDD
PGND
CP5
CP3
CP4
7
6
ST1
CP1
5
ST2
CP2
4
AVCC
3
TEMP
2
AGND
`
G
F
VRATIO
NC
SUMJ
E
D
C
RATEOUT
B
A
08999-003
1
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
6D, 7D
6A, 7B
6C, 7C
5A, 5B
4A, 4B
3A, 3B
1B, 2A
1C, 2C
1D, 2D
1E, 2E
1F, 2G
3F, 3G
4F, 4G
5F, 5G
6G, 7F
6E, 7E
Mnemonic
CP5
CP4
CP3
CP1
CP2
AVCC
RATEOUT
SUMJ
NC
VRATIO
AGND
TEMP
ST2
ST1
PGND
VDD
Description
HV Filter Capacitor (0.1 μF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Positive Analog Supply.
Rate Signal Output.
Output Amp Summing Junction.
No Connect.
Reference Supply for Ratiometric Output.
Analog Supply Return.
Temperature Voltage Output.
Self-Test for Sensor 2.
Self-Test for Sensor 1.
Charge Pump Supply Return.
Positive Charge Pump Supply.
Rev. A | Page 5 of 12
ADXRS624
TYPICAL PERFORMANCE CHARACTERISTICS
N > 1000 for all typical performance plots, unless otherwise noted.
35
45
40
PERCENT OF POPULATION (%)
25
20
15
10
5
35
30
25
20
15
10
5
30
35
10
08999-007
8
6
4
2
0
–1.30
–1.35
–1.40
–1.45
–1.50
–1.55
–1.60
–1.65
–1.70
–2.10
ST1 Δ (V)
Figure 5. Null Drift over Temperature (VRATIO = 5 V)
08999-008
RATEOUT TEMPCO (°/sec/°C)
08999-005
0.30
0.25
0.20
0.15
0.10
0.05
0
–0.05
0
–0.10
0
–0.15
5
–1.75
10
5
–0.20
–2
15
–1.80
10
20
–1.85
15
25
–1.90
20
30
–1.95
25
–2.00
PERCENT OF POPULATION (%)
40
–0.25
–4
Figure 7. Sensitivity Drift over Temperature
35
–0.30
–6
SENSITIVITY DRIFT (%)
Figure 4. Null Output at 25°C (VRATIO = 5 V)
PERCENT OF POPULATION (%)
–8
–10
3.4
RATEOUT (V)
0
08999-004
3.3
3.2
3.1
3.0
2.9
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
0
–2.05
PERCENT OF POPULATION (%)
30
Figure 8. ST1 Output Change at 25°C (VRATIO = 5 V)
40
30
PERCENT OF POPULATION (%)
20
15
10
5
30
25
20
15
10
5
ST2 Δ (V)
Figure 9. ST2 Output Change at 25°C (VRATIO = 5 V)
Figure 6. Sensitivity at 25°C (VRATIO = 5 V)
Rev. A | Page 6 of 12
2.10
08999-009
2.05
2.00
1.95
1.90
1.85
1.80
1.75
1.70
1.65
1.60
1.55
1.50
1.45
1.40
1.30
08999-006
27.50
27.25
27.00
26.75
26.50
26.25
26.00
25.75
25.50
25.25
25.00
24.75
24.25
24.50
SENSITIVITY (mV/°/sec)
1.35
0
0
24.00
PERCENT OF POPULATION (%)
35
25
ADXRS624
40
30
35
PERCENT OF POPULATION (%)
PERCENT OF POPULATION (%)
25
20
15
10
5
30
25
20
15
10
0
08999-010
98
94
90
86
82
78
74
70
66
62
58
54
50
0
MEASUREMENT RANGE (°/sec)
2.40 2.42 2.44 2.46 2.48 2.50 2.52 2.54 2.56 2.58 2.60
VTEMP OUTPUT (V)
Figure 10. Measurement Range
Figure 13. VTEMP Output at 25°C (VRATIO = 5 V)
2.5
3.3
2.0
3.1
1.5
2.9
VTEMP OUTPUT (V)
1.0
SELF-TEST Δ (V)
08999-013
5
0.5
0
–0.5
–1.0
2.7
2.5
2.3
2.1
1.9
–1.5
1.7
–2.0
0
20
40
60
80
100
120
TEMPERATURE (ºC)
1.5
–40
08999-011
–20
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
08999-014
256 PARTS
–2.5
–40
Figure 14. VTEMP Output over Temperature (VRATIO = 5 V)
Figure 11. Typical Self-Test Change over Temperature
60
30
REF
Y
25
X
40
+45°
–45°
20
g OR °/s
30
15
20
10
10
0
5
770
790
810
830
TIME (ms)
Figure 12. Current Consumption at 25°C (VRATIO = 5 V)
Figure 15. g and g × g Sensitivity for a 50 g, 10 ms Pulse
Rev. A | Page 7 of 12
850
08999-015
(mA)
–20
750
08999-012
0
–10
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
PERCENT OF POPULATION (%)
50
ADXRS624
0.10
2.0
LATITUDE
LONGITUDE
RATE
1.8
1.6
1.2
(°/s)
PEAK RATEOUT (°/s)
0.05
1.4
1.0
0
0.8
0.6
–0.05
0.4
1k
FREQUENCY (Hz)
10k
–0.10
08999-016
0
100
0
20
40
60
80
100
120
140
TIME (Hours)
08999-019
0.2
Figure 19. Typical Shift in 90 sec Null Averages Accumulated
over 140 Hours
Figure 16. Typical Response to 10 g Sinusoidal Vibration
(Sensor Bandwidth = 2 kHz)
0.10
400
300
DUT1 OFFSET BY +200°/s
0.05
200
(°/s)
(°/s)
100
0
0
–100
DUT2 OFFSET BY –200°/s
–200
–0.05
0
50
100
150
200
250
(ms)
–0.10
08999-017
–400
0
600
1200
1800
2400
3000
3600
TIME (Seconds)
Figure 17. Typical High g (2500 g) Shock Response
(Sensor Bandwidth = 40 Hz)
08999-020
–300
Figure 20. Typical Shift in Short Term Null (Bandwidth = 1 Hz)
0.1
0.1
0.01
(°/s rms)
(°/s/ Hz rms)
1
0.01
1
10
100
1k
10k
100k
AVERAGE TIME (Seconds)
0.0001
10
100
1k
10k
100k
(Hz)
Figure 18. Typical Root Allan Deviation at 25°C vs. Averaging Time
Figure 21. Typical Noise Spectral Density (Bandwidth = 40 Hz)
Rev. A | Page 8 of 12
08999-021
0.1
08999-018
0.001
0.01
0.001
ADXRS624
THEORY OF OPERATION
0.1
0.01
(°/s/ Hz rms)
0.001
0.0001
0.00001
0.000001
10
100
1k
10k
100k
(Hz)
The electrostatic resonator requires 18 V to 20 V for operation.
Because only 5 V are typically available in most applications, a
charge pump is included on-chip. If an external 18 V to 20 V
supply is available, the two capacitors on CP1 through CP4 can
be omitted, and this supply can be connected to CP5 (Pin 6D,
Pin 7D). Note that CP5 should not be grounded when power is
applied to the ADXRS624. Although no damage occurs, under
certain conditions the charge pump may fail to start up after the
ground is removed without first removing power from the
ADXRS624.
SETTING BANDWIDTH
TEMPERATURE OUTPUT AND CALIBRATION
It is common practice to temperature-calibrate gyros to improve
their overall accuracy. The ADXRS624 has a temperature
proportional voltage output that provides input to such a
calibration method. The temperature sensor structure is shown
in Figure 23. The temperature output is characteristically
nonlinear, and any load resistance connected to the TEMP
output results in decreasing the TEMP output and temperature
coefficient. Therefore, buffering the output is recommended.
1
VTEMP
(2 × π × ROUT × COUT )
(200 kΩ × REXT )
(200 kΩ + REXT )
In general, an additional hardware or software filter is added to
attenuate high frequency noise arising from demodulation
spikes at the gyro’s 14 kHz resonant frequency (the noise spikes
at 14 kHz can be clearly seen in the power spectral density
curve shown in Figure 21). Typically, this additional filter’s
corner frequency is set to greater than 5× the required bandwidth to preserve good phase response.
Figure 22 shows the effect of adding a 250 Hz filter to the
output of an ADXRS624 set to 40 Hz bandwidth (as shown in
Figure 21). High frequency demodulation artifacts are
attenuated by approximately 18 dB.
RFIXED
RTEMP
08999-023
VRATIO
and can be well controlled because ROUT is trimmed during
manufacture to be 200 kΩ ± 1%. Any external resistor applied
between the RATEOUT pin (1B, 2A) and SUMJ pin (1C, 2C)
results in
ROUT =
Figure 22. Noise Spectral Density with Additional 250 Hz Filter
The voltage at the TEMP pin (3F, 3G) is nominally 2.5 V at
25°C and VRATIO = 5 V. The temperature coefficient is ~9 mV/°C
at 25°C. Although the TEMP output is highly repeatable, it has
only modest absolute accuracy.
External Capacitor COUT is used in combination with the onchip ROUT resistor to create a low-pass filter to limit the
bandwidth of the ADXRS624 rate response. The –3 dB
frequency set by ROUT and COUT is
fOUT =
08999-022
The ADXRS624 operates on the principle of a resonator gyro.
Two polysilicon sensing structures each contain a dither frame
that is electrostatically driven to resonance, producing the
necessary velocity element to produce a Coriolis force during
angular rate. At two of the outer extremes of each frame,
orthogonal to the dither motion, are movable fingers that are
placed between fixed pickoff fingers to form a capacitive pickoff
structure that senses Coriolis motion. The resulting signal is fed
to a series of gain and demodulation stages that produce the
electrical rate signal output. The dual-sensor design rejects
external g forces and vibration. Fabricating the sensor with the
signal conditioning electronics preserves signal integrity in
noisy environments.
Figure 23. ADXRS624 Temperature Sensor Structure
CALIBRATED PERFORMANCE
Using a three-point calibration technique, it is possible to
calibrate the null and sensitivity drift of the ADXRS624 to an
overall accuracy of nearly 200°/hour. An overall accuracy of
40°/hour or better is possible using more points.
Limiting the bandwidth of the device reduces the flat-band
noise during the calibration process, improving the measurement accuracy at each calibration point.
ADXRS624 AND SUPPLY RATIOMETRICITY
The ADXRS624 RATEOUT and TEMP signals are ratiometric
to the VRATIO voltage; that is, the null voltage, rate sensitivity, and
temperature outputs are proportional to VRATIO. Thus, the
ADXRS624 is most easily used with a supply-ratiometric ADC
that results in self-cancellation of errors due to minor supply
variations. There is some small error due to nonratiometric
Rev. A | Page 9 of 12
ADXRS624
behavior. Typical ratiometricity error for null, sensitivity, selftest, and temperature output is outlined in Table 4.
Note that VRATIO must never be greater than AVCC.
Table 4. Ratiometricity Error for Various Parameters
Parameter
ST1
Mean
Sigma
ST2
Mean
Sigma
Null
Mean
Sigma
Sensitivity
Mean
Sigma
VTEMP
Mean
Sigma
VS = VRATIO = 4.75 V
VS = VRATIO = 5.25 V
−0.4%
0.6%
−0.3%
0.6%
−0.4%
0.6%
−0.3%
0.6%
−0.04%
0.3%
−0.02%
0.2%
0.03%
0.1%
0.1%
0.1%
−0.3%
0.1%
−0.5%
0.1%
SELF-TEST FUNCTION
The ADXRS624 includes a self-test feature that actuates each of
the sensing structures and associated electronics as if subjected
to angular rate. The self-test feature is activated by standard
logic high levels applied to Input ST1 (5F, 5G), Input ST2 (4F,
4G), or both. ST1 causes the voltage at RATEOUT to change
about −1.9 V, and ST2 causes an opposite change of +1.9 V. The
self-test response follows the viscosity temperature dependence
of the package atmosphere, approximately 0.25%/°C.
Activating both ST1 and ST2 simultaneously is not damaging.
ST1 and ST2 are fairly closely matched (±5%), but actuating
both simultaneously may result in a small apparent null bias
shift proportional to the degree of self-test mismatch.
ST1 and ST2 are activated by applying a voltage of greater than
0.8 × VRATIO to the ST1 and ST2 pins. ST1 and ST2 are deactivated
by applying a voltage of less than 0.2 × VRATIO to the ST1 and
ST2 pins. The voltage applied to ST1 and ST2 must never be
greater than AVCC.
CONTINUOUS SELF-TEST
NULL ADJUSTMENT
The nominal 2.5 V null is for a symmetrical swing range at
RATEOUT (1B, 2A). However, a nonsymmetrical output swing
may be suitable in some applications. Null adjustment is
possible by injecting a suitable current to SUMJ (1C, 2C). Note
that supply disturbances may reflect some null instability.
Digital supply noise should be avoided particularly in this case.
The one-chip integration of the ADXRS624 gives it higher
reliability than is obtainable with any other high volume
manufacturing method. In addition, it is manufactured
under a mature BiMOS process with field-proven reliability.
As an additional failure detection measure, a power-on
self-test can be performed. However, some applications may
warrant continuous self-test while sensing rate. Details
outlining continuous self-test techniques are also available
in the AN-768 Application Note.
Rev. A | Page 10 of 12
ADXRS624
OUTLINE DIMENSIONS
A1 BALL
CORNER
7.05
6.85 SQ
6.70
*A1 CORNER
INDEX AREA
7
6
5
4
3
2
1
A
B
4.80
BSC SQ
0.80
BSC
C
D
E
F
G
TOP VIEW
BOTTOM VIEW
DETAIL A
3.80 MAX
0.60
0.55
0.50
SEATING
PLANE
3.20 MAX
2.50 MIN
COPLANARITY
0.15
BALL DIAMETER
*BALL A1 IDENTIFIER IS GOLD PLATED AND CONNECTED
TO THE D/A PAD INTERNALLY VIA HOLES.
10-26-2009-B
DETAIL A
0.60 MAX
0.25 MIN
Figure 24. 32-Lead Ceramic Ball Grid Array [CBGA]
(BG-32-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model1, 2
ADXRS624BBGZ
ADXRS624BBGZ-RL
ADXRS624WBBGZ
ADXRS624WBBGZ-RL
EVAL-ADXRS624Z
1
2
Temperature Range
–40°C to +105°C
–40°C to +105°C
–40°C to +105°C
–40°C to +105°C
Package Description
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
Evaluation Board
Package Option
BG-32-3
BG-32-3
BG-32-3
BG-32-3
Z = RoHS Compliant Part.
W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The ADXRS624WBBGZ models are available with controlled manufacturing to support the quality and reliability requirements of
automotive applications. Note that these automotive models may have specifications that differ from the commercial models; therefore,
designers should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for
use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and
to obtain the specific Automotive Reliability reports for these models.
Rev. A | Page 11 of 12
ADXRS624
NOTES
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08999-0-9/10(A)
Rev. A | Page 12 of 12
Similar pages