CDE AEB686M2CR44T-F Low impedance and long life for high voltage, high ripple current application Datasheet

Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Low Impedance and Long Life for High Voltage, High Ripple Current Applications
Type AEB capacitors are it for high voltage applications like input
bus capacitors in board mounted miniature AC/DC supplies. The
AEB’s low impedance in ratings up to 450 Vdc, and long life, make
it ideal for power supply input and other high voltage applications.
The vertical, cylindrical cases make easy automatic mounting and
reflow soldering.
Highlights
• +105 °C, Up to 5000 Hour Load Life
• Capacitance Range: 2.2 µF to 100 µF
• Voltage Range: 160 Vdc to 450 Vdc
Specifications
Operating Temperature:
Rated Voltage:
Capacitance:
Capacitance Tolerance:
Impedance Ratio (at 120 Hz):
–25 °C to +105 °C
160, 200, 250, 350, 400, 450 Vdc
2.2 µF to 100 µF
±20% @ 120 Hz and +20 °C
Rated Voltage
160
200
250
350
400
450
Z(-25°C)/Z(+20°C)
2
2
3
5
6
6
Life Test:
5000 h @ +105 °C, L — S Cases
4000 h @ +105 °C, K Case
3000 h @ +105 ºC, J Case
∆ Capacitance ± 20%
DF: ≤ 200% of limit
DCL: ≤ 100% of limit
Shelf Test: 1000 h @ 105 °C
∆ Capacitance ± 20%
DF: ≤ 200% of limit
DCL: ≤ 100% of limit
Complies with the EU Directive 2002/95/EC requirement restricting the use of
Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent
chromium (Cr(VI)), PolyBrominated Biphenyls (PBB)
and PolyBrominated Diphenyl Ethers (PBDE).
AEB Series Marking
Outline Drawing
Case Dimensions
Case Code
D ±0.5
L ±0.5
A ±0.2
H (max)
I (ref)
W
P (ref)
K (mm)
J
10.0
13.5
10.3
12
3.5
0.9 ±0.2
4.6
0.7 ± 0.2
K
10.0
16.5
10.3
12
3.5
0.9 ±0.2
4.6
0.7 ± 0.2
L
12.5
16.5
13.5
15
4.7
0.9 ±0.3
4.4
0.7 ± 0.3
P
16.0
16.5
17.0
19
5.5
1.2 ±0.3
6.7
0.7 ± 0.3
U
16.0
21.5
17.0
19
5.5
1.2 ±0.3
6.7
0.7 ± 0.3
R
18.0
16.5
19.0
21
6.7
1.2 ±0.3
6.7
0.7 ± 0.3
S
18.0
21.5
19.0
21
6.7
1.2 ±0.3
6.7
0.7 ± 0.3
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Ratings
Max.
Max.
Max.
Max.
Dissipation
Impedance
Ripple Current
Cap
Catalog
DCL
Factor @
@ 100 kHz
@ 105 °C
(µF)
Part Number
2 min
120 Hz
20 °C
100 kHz
(µA)
20 °C
(Ω)
(mA)
Size (mm) Quantity
DxL
Reel
160 Vdc
10.0
AEB106M2CJ32T-F
106
0.15
3.00
70
10 x 13.5
250
33.0
AEB336M2CL32T-F
327
0.15
1.80
470
12.5 x 16.5
150
47.0
AEB476M2CP44T-F
461
0.15
1.40
600
16 x 16.5
125
68.0
AEB686M2CU44T-F
663
0.15
0.55
750
16 x 21.5
75
68.0
AEB686M2CR44T-F
663
0.15
0.80
750
18 x 16.5
125
100.0
AEB107M2CS44T-F
970
0.15
0.50
1060
18 x 21.5
75
200 Vdc
22.0
AEB226M2DL32T-F
274
0.15
1.80
470
12.5 x 16.5
150
33.0
AEB336M2DP44T-F
406
0.15
1.40
600
16 x 16.5
125
47.0
AEB476M2DR44T-F
574
0.15
0.80
600
18 x 16.5
125
68.0
AEB686M2DU44T-F
826
0.15
0.55
750
16 x 21.5
75
100.0
AEB107M2DS44T-F
1210
0.15
0.50
1060
18 x 21.5
75
10.0
AEB106M2EK32T-F
160
0.15
2.50
88
10 x 16.5
200
22.0
AEB226M2EP44T-F
340
0.15
1.60
560
16 x 16.5
125
33.0
AEB336M2ER44T-F
505
0.15
0.85
560
18 x 16.5
125
47.0
AEB476M2EU44T-F
715
0.15
0.70
710
16 x 21.5
75
68.0
AEB686M2ES44T-F
1030
0.15
0.60
990
18 x 21.5
75
10.0
AEB106M2VP44T-F
220
0.20
3.20
270
16 x 16.5
125
22.0
AEB226M2VR44T-F
472
0.20
1.60
350
18 x 16.5
125
33.0
AEB336M2VU44T-F
703
0.20
1.20
480
16 x 21.5
75
47.0
AEB476M2VS44T-F
997
0.20
1.00
670
18 x 21.5
75
250
250 Vdc
350 Vdc
400 Vdc
3.3
AEB335M2GJ32T-F
89
0.24
8.00
40
10 x 13.5
4.7
AEB475M2GK32T-F
123
0.24
5.50
50
10 x 16.5
200
10.0
AEB106M2GP44T-F
250
0.24
3.60
250
16 x 16.5
125
22.0
AEB226M2GU44T-F
538
0.24
2.20
410
16 x 21.5
75
33.0
AEB336M2GS44T-F
802
0.24
1.20
600
18 x 21.5
75
450 Vdc
2.2
AEB225M2WJ32T-F
69
0.24
11.00
29
10 x 13.5
250
3.3
AEB335M2WK32T-F
99
0.24
7.00
41
10 x 16.5
200
4.7
AEB475M2WL32T-F
137
0.24
4.80
49
12.5 x 16.5
150
10.0
AEB106M2WR44T-F
280
0.24
3.00
310
18 x 16.5
125
22.0
AEB226M2WS44T-F
604
0.24
1.80
560
18 x 21.5
75
Part Numbering System
AEB
Type
106
Capacitance
105 = 1.0 µF
106 = 10.0 µF
107 = 100.0 µF
M
2C
J
32T
Voltage Code
Case
Code
Packaging
Information
Capacitance
Tolerance
2C = 160 Vdc
2V = 350 Vdc
M = ±20%
2D = 200 Vdc
2G = 400 Vdc
2E = 250 Vdc
2W = 450 Vdc
-F
RoHS
Compliant
32 = Carrier tape
Width (mm)
T = Tape & Reel
See the Aluminum SMT Application Guide for Packaging Information.
B = bulk
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Recommended Land Pattern
Case
Code
C
A
B
B
Case Dia.
A
(mm)
(mm)
B
(mm)
C
(mm)
J
10
4.0
4.5
2.0
K
10
4.0
4.5
2.0
L
12.5
4.0
5.7
2.0
P
16
6.0
6.5
2.5
U
16
6.0
6.5
2.5
R
18
6.0
7.5
2.5
S
18
6.0
7.5
2.5
Ripple Current Correction Factor
Ripple Current Correction Factor vs Frequency
Vdc
120 Hz
1kHz
10kHz to 30kHz 30kHz to 100kHz
160 to 250
0.55
0.85
0.90
1.00
350 to 450
0.50
0.80
0.90
1.00
Recommended Reflow Soldering Profile for AEB Series (10 to 18 mm dia.)
Top surface temperature
(°C)
230°C
120 seconds
20
sec.
Time
Max. top surface temperature during reflow soldering
230°C
Maximum time at peak temperature
5 seconds
Maximum time at or above 200°C
20 seconds
Number of reflow processes
Terminal Material
1
copper clad iron
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Typical Performance Curves
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type AEB
SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Similar pages