TT AEC-Q200 Thick film chip array Datasheet

Resistors
Thick Film Chip Arrays
BCN Series
Features
Thick Film
Chip Resistor Arrays
RoHS Compliant
Sulphur resistant version available (Tested to ASTM-B809)
AEC-Q200 (BCN164AB and BCN4D)
All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)
Model Styles
# of Resistors
Circuit
Package Size
Chip
Array
Model BCN 10 (1.0mm)
4 Resistors
Isolated
0804
0402
Model BCN 16 4ABI (1.6mm)
4 Resistors
Isolated
1206
0603
Model BCN 16 4A/AB (1.6mm)
4 Resistors
Isolated
1206
0603
Model (Width)
Model BCN 16 8RB/8SB (1.6mm)
8 Resistors
Bussed
1206
0603
Model BCN 21 (2.1mm)
8 Resistors
Bussed
1608
0804
Model BCN 4D (3.1mm)
4 Resistors
Isolated
2112
1206
Model BCN 4DBI (3.1mm)
4 Resistors
Isolated
2112
1206
Model BCN 31 8RB/8SB (3.1mm)
8 Resistors
Bussed
2512
1206
Model BCN 31 8RBI/8SBI (3.1mm)
8 Resistors
Bussed
2512
1206
4/8 Resistors
Isolated/Bussed
All
All
Jumper Chip Array
Features
·
·
·
·
·
Reliable monolithic construction
Nickel barrier terminations
Top side marking for easy identification
Concave or convex termination styles
Square or scalloped edges available
Edge Finish / Termination
Scalloped
Convex
Square
Convex
Square
Concave
•
•
•
•
•
•
•
•
•
•
•
•
•
Benefits
·
·
·
·
·
Saves board space over equivalent rated chip resistors
Eliminates up to seven pick & place operations
Single component reliability
Leadless chip, reduced inductance
Mounts close to active devices
Applications
·
·
·
·
Pull up / pull down resistors for digital IC’s
Series termination on high speed data busses
Current limit for LED displays
Available as an 8 bit R/2R Ladder Network
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Electrical
Standard Resistance Range,
Ohms
BCN4D, BCN10, BCN16 4:
BCN 16 8R / 8S:
BCN 31 8R / 8S:
BCN 21:
10 to 1 Megohm
100 to 1 Megohm
22 to 1 Megohm
68 to 220K
±5% (J Tol.)
Optional: ±1% (F Tol.), BCN 4D, BCN 16 4, BCN31 8RB / 8SB Only
±2% (G Tol.), BCN 16 4, BCN31 8RB / 8SB Only
Standard Resistance Tolerance
Operating Voltage, Maximum
BCN 4D:
BCN 16 4, BCN 31 8R / 8S:
BCN 10, BCN 16 8R / 8S, BCN 21:
Power Rating, watts at 70°C
BCN 4D:
BCN 10, BCN 164:
BCN 16 8R / 8S:
BCN 21, BCN 31 8R / 8S:
75Vdc or √pr
50Vdc or √pr
25Vdc or √pr
125mW per Resistor / 500mW per Package
63mW per Resistor / 250mW per Package
32mW per Resistor / 250mW per Package
63mW per Resistor / 500mW per Package
Environmental
Test
Condition
Parts with no TCR code
Operating Temperature Range
Parts with Z TCR code
-55°C to +155°C
Temperature Coefficient of Resistance
±200ppm/°C
±100ppm/°C
Moisture Resistance
1,000 hours @ +40°C, 95% R.H.
3% +0.1Ω ΔR
1% +0.1Ω ΔR
High Temperature Operation
1,000 hours @ 155°C
3% +0.1Ω ΔR
1% +0.1Ω ΔR
Short Time Overload
2.5 x rated voltage, 5 seconds
2% +0.1Ω ΔR
0.25% +0.1Ω ΔR
Temperature Cycling
-55°C to +155°C, 5 cycles
1% +0.1Ω ΔR
1% +0.1Ω ΔR
Resistance to Solder Heat
260°C for 10 seconds
1% +0.1Ω ΔR
0.25% +0.1Ω ΔR
Load Life
1,000 hours @ 70°C
3% +0.1Ω ΔR
1% +0.1Ω ΔR
Construction
Passivation:
Glass or Resin
Conductor
Nickel Barrier
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Resistor: Ruthenium Oxide
Alumina Substrate
100% Tin
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Electrical
BCN 16 8R & BCN 31 8R
BCN 06 4, BCN 4D, BCN 10 & BCN 16 4
R1
R2
R3
10
9
8
7
6
1
2
3
4
5
R4
R1 = R2….Rn
(n = 2, 4)
BCN 16 8S & BCN 31 8S
BCN 21
10
9
8
7
6
1
2
3
4
5
Standard Resistance Values, Ohms
Model, BCN 4D, BCN 10 & BCN 16 4
Model BCN 16 8R & BCN 16 8S
10
100
1K
10K
100K
1 Meg
220
1K
10K
100K
12
120
1.2K
12K
120K
Jumper
330
4.7K
47K
1 Meg
15
150
1.5K
15K
150K
18
180
1.8K
18K
180K
22
220
2.2K
22K
220K
27
270
2.7K
27K
270K
220
33
330
3.3K
33K
330K
330
2.7K
22K
470K
1K
4.7K
47K
1 Meg
39
390
3.9K
39K
390K
47
470
4.7K
47K
470K
56
560
5.6K
56K
560K
68
680
6.8K
68K
680K
82
820
8.2K
82K
820K
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Model BCN 31 8R
Model BCN 31 8S
2.2K
10K
100K
Model BCN 21
68
330
4.7K
10K
220
1K
47K
100K
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Outline Dimensions (Inch /mm)
Exterior Termination (Convex)
Square Edge: Models BCN 16 4AB, 31
Scalloped Edge: Models
BCNBCN
2D, 4D,
2D, 16
4D,4A
16
L (BCN 4D, BCN 16 4A)
L (BCN 31)
L (BCN 4D, BCN 10,BCN 16 4A)
C
C
W
W
B
H
H
P
BCN 4D
BCN 10
BCN 16 4A/ AB
BCN 31
B1
P
B
L
W
H
P
B
B1
C
.210 ±.008
.122 ±.008
.022 ±.004
.050 ±.008
.030 ±.008
5.34 ±0.20
3.10 ±0.20
0.55±0.10
1.27±0.20
0.80 ±0.20
.079 ±.008
.039 ±.006
.014 ±.004
.020 ±.004
.012 ±.006
.016±.006
.006±.002
2.00 ±0.20
1.00 ±0.15
0.36 ±0.10
0.50 ±0.10
0.30 ±0.15
0.40 ±0.15
0.15 ±0.05
.126 ±.004
.063 ±.004
.020 ±.004
.031 ±.002
.020 ±.004
.012 ±.008
-
0.30 ±0.20
.009 ±.005
-
3.20 ±0.10
1.60 ±0.10
0.50 ±0.10
0.80 ±0.05
0.50 ±0.10
.252 ±.008
.122+.012,-.008
.022 ±.004
.050 ±.002
.032 ±.004
.041±.004
0.229 ±0.125
.012 ±.004
6.40 ±0.20
3.1 +0.3, -0.2
0.55 ±0.10
1.27 ±0.051
0.80 ±0.10
1.05±0.10
0.30 ±0.10
Interior Termination (Concave)
Square Edge: Models BCN 4 DBI, 16 4ABI, 31
C1
L
H
C
C
P
B
L
W
H
P
B
C
.210 ±.008
.122 ±.008
.022 ±.004
.050 ±.008
.030 ±.008
.012 ±.008
BCN 4 DBI
5.34 ±0.20
3.10 ±0.20
0.55 ±0.10
1.27 ±0.20
0.80 ±0.20
0.30 ±0.20
BCN 16 4ABI
.126 ±.008
.063 ±.006
.024 ±.004
.031 ±.004
.016 ±.006
.012 ±.008
.012 ±.008
3.20 ±0.20
1.60 ±0.15
0.60 ±0.10
0.80 ±0.10
0.40 ±0.15
0.30 ±0.20
0.30 ±0.20
.252 ±.008
.122 ±.008
.024 ±.004
.050
.028 ±.008
.012
.012
6.40 ±0.20
3.10 ±0.20
0.60 ±0.10
1.27
0.70 ±0.20
0.30
BCN 31
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
C1
-
+.008 -.004
0.30
+.02
-.01
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Outline Dimensions (Inch /mm)
Exterior Termination (Convex)
Square Edge: Models BCN 16 8R, 8S
T
L
B1
A
W
C
P
B2
L
W
T
A
B1
B2
C
P
.126 ±.008
.063 ±.008
.020 ±.004
.012 ±.006
.014 ±.006
.020 ±.006
.008
.025
3.20 ±0.20
1.60 ±0.20
0.50 ±0.10
0.30 ±0.15
0.36 ±0.15
0.50 ±0.15
0.20
0.64
Interior Termination (Concave)
Square Edge: Models BCN 21
L
T
W
C
B
P
A
D
C1
B1
A1
L
W
E
T
D1
A
B
C
D
.157 ±.008
.083 ±.008
.021 ±.004
.020 ±.008
.010 ±.008
.020 ±.008
.012 ±.008
4.00 ±0.20
2.10 ±0.20
0.55 ±0.10
0.50 ±0.20
0.25 ±0.20
0.50 ±0.20
0.30 ±0.20
A1
B1
C1
D1
.016 ±.008
.014 ±.008
.020 ±.008
.014 ±.008
0.40 ±0.20
0.40 ±0.20
0.50 ±0.20
0.35 ±0.20
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
E
P
.012 Typ.
0.30
.032 Typ.
0.80
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Solder pad layout (Inch / mm)
BCN 31 Only
BCN 16 4AB, 4ABI
Y
A
B
Y
C
X
P
Wave Solder Process
BCN 4D/4DBI
BCN 16 4A,
AB, ABI
BCN 31 8R, 8S
Re-flow Solder Process
P
A
B
C
X
Y
A
B
C
X
Y
.050
.087
.169
.022
.028
.041
.087
.154
.022
.028
.034
1.27
2.20
4.30
0.57
0.70
1.05
2.20
3.90
0.57
0.70
0.85
.032
.039
.118
.014
.018
.039
.039
.118
.014
.018
.039
0.80
1.00
3.00
0.35
0.45
1.00
1.00
3.00
0.35
0.45
1.00
.050
.084
.148
.014
.036
.032
.084
.148
.014
.036
.032
1.27
2.10
3.70
0.35
0.90
0.80
2.10
3.70
0.35
0.90
0.80
BCN 16 8RB / 8SB
Y
P
A
B
Y
X1
X
Wave Solder Process
BCN 16 8RB / 8SB
Re-flow Solder Process
P
A
B
X
X1
Y
A
B
X
X1
Y
.025
.048
.096
.012
.018
.024
.048
.096
.012
.018
.024
0.64
1.20
2.40
0.30
0.45
0.60
1.20
2.40
0.30
0.45
0.60
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Solder pad layout (Inch / mm)
BCN 10
L
Y
P
A
P1
B
X
BCN 10
X1
P
P1
A
B
X
X1
Y
L
.024
.020
.020 ±.004
.060 ±.004
010 ±.004
.018 ±.004
.020 ±.004
.085 ±.004
0.60
0.50
0.50 ±0.10
1.50 ±0.10
0.25 ±0.15
0.45 ±0.10
0.50 ±0.10
2.15 ±0.10
BCN 21
L
W1
C
W2
A
B
W3
Y
W
P
X
BCN 21
P
A
B
C
X
Y
W
W1
W2
W3
L
.032
.060 ±.008
.120 ±.008
.016 ±.004
.016 ±.004
.030 ±.004
.012 ±.001
.015 ±.004
.030 ±.004
.030 ±.004
.196 ±.008
0.80
1.20 ±0.20
3.00 ±0.20
0.40 ±0.10
0.40 ±0.10
0.75 ±0.10
0.31 ±0.02
0.38 ±0.10
0.75 ±0.10
0.75 ±0.10
4.98 ±0.20
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Ordering Information
4
BCN
D
B
I
102
J
7
S
Model Series
Construction Option:
No code = Standard product
S = Sulphur resistant - only
No. of Resistors:
on BCN4DxxxJ7
BCN 4D = 4 Resistors
Packaging Option:
7” or 13”
(See Table A)
Circuit Configuration:
D = Isolated
Tolerance: ±5%
Resistance Code
Edge Option (B = Square Edge):
Termination Code:
BCN 4D: Scalloped Edge Only - No Code Used
I = Interior (Concave) Termination
(Only available in BCN 4 DBI)
BCN
16
4
A
B
I
Z
Model Series
102
J
7
S
Construction Option:
No code = Standard product
Width:
10 = 1.0mm
S = Sulphur resistant - only
on BCN 104/164/168RB
16 = 1.6mm
21 = 2.1mm
31 = 3.1mm
Packaging Option:
7” or 13”
(See Table A)
Tolerance:
No. of Resistors:
BCN 10 / 06 4 / 16 4 = 4 Resistors
BCN 16 8R / 16 8S = 8 Resistors
BCN 21 / 31 8R / 31 8S = 8 Resistors
Circuit Configuration:
A = Isolated (BCN 10 / 16 4A)
R = Bussed (Reversed) (BCN 16 8R / 31 8R)
S = Bussed (Standard) (BCN 21 / 16 8S / 31 8S)
Edge Option (B = Square Edge):
Scalloped Edge - No Code Used (Standard)
Square Edge Only - Use Code ‘B’
F = ±1% (BCN 4D / 16 4 / 31 8RB / 31 8SB)
G = ±2% (BCN 16 4, 31 8RB / 8SB Only)
J = ±5% (Standard)
(Use JP for Jumper Chip Array - BCN 16 4 / 31)
Resistance Code:
3 digits for all E24 values in 2% or 5% tolerance
4 digits for uniquely E96 values in any tolerances and
for any value in 1% tolerance
TCR Code:
No code = ±200ppm/°C (standard)
Z = ±100ppm/°C (BCN164 only)
Termination Code:
I = Interior (Concave) Termination
No code used for exterior termination ( Standard)
All interior termination requires ‘B’ for square edge
See ‘Model Styles’ for Available Options
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
(BCN 16 4ABI / 31 8RBI / 31 8SBI)
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Thick Film Chip Arrays
BCN Series
Packaging (Table A)
7” Reel Diameter
Paper
BCN 4D
13” Reel Diameter
Embossed
Paper
4K
Embossed
16K
BCN 10
10K
40K
BCN 16 4
5K
20K
BCN 16 8
5K
20K
BCN 21
4K
16K
BCN 31
4K
16K
Note: Tape & Reel dimensions per EIA-481.
Sulphur Resistant Arrays
·
·
·
·
·
Special construction resists sulphide growth
Withstands sulphur bearing fume
environment
Tested to ASTM-B809 (“Flowers-of-Sulphur”)
Suitable for industrial, automotive and
roadside uses
RoHS compliant matt Tin finish terminations
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Performance Data
Hydrogen Sulphide exposure:
·
·
1000 Hours, 3-5ppm H2S, 50°C, 92%RH
0.5% Max ΔR and no visual defects
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
02.18
Similar pages