AVAGO AFBR-83EVK 12channel x 10.3125gbps transceiver cxp pluggable, parallel fiber-optics module Datasheet

AFBR-83PDZ
12Channel x 10.3125Gbps Transceiver
CXP Pluggable, Parallel Fiber-Optics Module
Product Brief
Description
Features
The Avago Technologies AFBR-83PDZ is a TwelveChannel, Pluggable, Parallel, Fiber-Optic CXP Transceiver
for 100 Gigabit Ethernet (100GbE) and 12 x 10G InfiniBand (IB) quadruple data rate (IB-QDR) applications. This
transceiver is a high performance module for short-range
multi-lane data communication and interconnect applications. It integrates twelve data lanes in each direction with
greater than 120 Gbps aggregate bandwidth. Each lane
can operate at 10.3125 Gbps up to 100 m using OM3 fiber
and 150m using OM4 fiber. These modules are backward
compatible to the 12 x 5G IB dual data rate (IB-DDR) and
12 x 2.5G IB single data rate (IB-SDR) applications.
• Compliant to SFF-8642: Mini Multilane Series: Shielded
Integrated Connector, and IBTA Annex A6 CXP Interface
Specification
• Each of the twelve channels is compliant on a per
lane electrical and optical specification basis with
the IEEE 802.3ba 100GbE (100GBASE-SR10 and CPPI)
specifications, and supporting InfiniBand QDR/DDR/
SDR application
• Multi-rate capable from 1 Gbps to 10.5 Gbps
• High Channel Capacity: >120Gbps per module, bidirectional, with twelve independent Transmitters and
Receivers each
• Operates at 10.3125 Gbps per channel with 64b/66b
encoded data for 100GbE application and at 10 Gbps
with 8b/10b encoded data for IB-QDR application
• Hot Pluggable
• Links up to 100 m using OM3 fiber and 150 m using
OM4 fiber
• 0 to 70° C case temperature operating range
• 3.3V power supply only
• Low power dissipation of < 3 W
• Proven High Reliability 850 nm technology: Avago
VCSEL array transmitter and Avago PIN array receiver
• Two Wire Serial (TWS) interface with maskable interrupt
for expanded functionality including:
– Individual channel functions: channel/output
disable, squelch disable, and lane polarity inversion
– Diagnostic
Monitoring
functions:
module
temperature and supply voltages, per channel laser
current and laser power, and input receiver power
– Status per channel: Tx fault, electrical (transmitter)
and optical (receiver) LOS, and alarm flags
• Utilizes a standard 24 lane optical fiber with MTP
(MPO) optical connector for high density and thin,
light-weight cable management
These modules are designed to operate over multimode
fiber systems using a nominal wavelength of 850nm. The
electrical interface uses an 84-contact edge type connector. The optical interface uses a 24-fiber MTP (MPO)
connector. This module incorporates Avago Technologies
proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent
service.
Applications
• 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
• Data Aggregation, Backplane and Proprietary Protocol
and Density Applications
• Datacom/Telecom switch & router connections
Part Number Ordering Options
AFBR-83PDZ
12x 10.3125Gbps (Ethernet) and IB-QDR/IBDDR/IB-SDR with Full Diagnostic Monitoring
AFBR-83EVB
CXP Evaluation Board
AFBR-83EVK*
CXP Evaluation Kit
*
Includes GUI, User Guide, i-Port and Power Supply
Mechanical Dimensions, Package Outline
112
34.93
28.45
67.92
19.21
23.9
21.2
23.9
13.73
48.62
9.81
4.6
7.69
All dimensions in millimeters:
*
Mechanical dimensions depicted are nominal dimensions and are subject to change
Key Product Parameters
The Avago Technologies CXP Transceiver operates at 850 nm and is compliant on a per lane basis to the 100GBASE-SR10
optical specs in clause 86 and CPPI electrical specs in annex 86A of the IEEE 802.3ba specifications.
Parameter
Value
Units
Notes
Data rate per lane[1]
10.3125
Gbps
As per 802.3ba: 100GBASE-SR10 and CPPI specifications
Number of operational lanes
12
Link Length [2]
100
150
m
m
OM3
OM4
Operating Temperature Range
0-70
ºC
Case Temperature
Power Supply Voltage
3.3
V
The Avago Technologies CXP Module requires only 3.3V Power rails
Management Interface
Two-Wire
Serial
Digital Monitoring
100GbE operation utilizes the middle ten lanes (Rx and Tx)
of the 12 physically defined CXP lanes
Specifications are compliant with InfiniBand Architecture 1.2.1 Annex A6: CXP
Per InfiniBand Architecture 1.2.1 Annex A6: CXP
Transceiver Eye Safety
Class 1M [3]
per EN 60825-1:2007
Transceiver Power Consumption
3 W (Max)
Power Level Class 4 per InfiniBand Architecture 1.2.1 Annex A6: CXP
Electrical Interface
84 contacts
Compliant to SFF-8642:
MINI MULTILANE SERIES: SHIELDED INTEGRATED CONNECTOR
Notes:
1. For applications beyond 10.3 Gbps per channel, please contact Avago Sales.
2. Connector loss of 1.5dB (OM3) / 1dB (OM4) allocated
3. WARNING: INVISIBLE LASER RADIATION, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes AV02-2611EN
AV02-3339EN - April 3, 2012
Similar pages