ETC AG604-86 Ingap hbt gain block Datasheet

AG604-86
The Communications Edge TM
InGaP HBT Gain Block
Product Features
•
•
•
•
•
•
•
DC – 6000 MHz
+19.5 dBm P1dB at 900 MHz
+33 dBm OIP3 at 900 MHz
20.5 dB Gain at 900 MHz
Single Voltage Supply
SOT-86 SMT Package
Internally matched to 50 Ω
Applications
•
•
•
•
•
•
Mobile Infrastructure
CATV / DBS
W-LAN / ISM
RFID
Defense / Homeland Security
Fixed Wireless
Product Information
Product Description
Functional Diagram
The AG604-86 is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 900 MHz, the AG604-86 typically provides
20.5 dB of gain, +33 dBm Output IP3, and +19.5 dBm
P1dB. The device combines dependable performance with
consistent quality to maintain MTTF values exceeding 100
years at mounting temperatures of +85° C and is housed in
a SOT-86 industry-standard SMT package.
GND
4
RF In
3 RF Out
1
2
The AG604-86 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT technology process
technology and only requires DC-blocking capacitors, a
bias resistor, and an inductive RF choke for operation.
GND
Function
Input
Output/Bias
Ground
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the AG604-86 will work for other various applications
within the DC to 6 GHz frequency range such as CATV
and fixed wireless.
Specifications
Pin No.
1
3
2, 4
Typical Performance
Parameter
Units
Min
Typ
Max
Parameter
Frequency Range
Gain (900 MHz)
Gain (1900 MHz)
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Output IP2
Noise Figure
Device Voltage
Device Current
Thermal Resistance
Junction Temperature (3)
MHz
dB
dB
dB
dB
dBm
dBm
dBm
dB
V
mA
°C / W
°C
DC
900
20.5
17.1
21
15
+19.4
+33.1
+44
3.5
5.16
75
6000
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
16.1
18.1
Units
MHz
dB
dB
dB
dBm
dBm
dB
Typical
500
21.8
-19
-19
+19.4
+33.4
3.5
900
20.5
-21
-15
+19.4
+33.1
3.5
1900
17.1
-20
-12
+19.2
+33.1
3.7
2140
16.4
-18
-12
+19.2
+32.8
3.7
Test conditions: T = 25º C, Supply Voltage = +6 V, Rbias = 11.2 Ω, 50 Ω System.
206
177
Test conditions unless otherwise noted.
1. T = 25º C, Supply Voltage = +6 V, Rbias = 11.2 Ω, Frequency = 900 MHz, 50 Ω System.
2. 3OIP measured with two tones at an output power of +2 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. The junction temperature ensures a minimum MTTF rating of 1 million hours of usage.
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
DC Voltage
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +125 °C
+7 V
+10 dBm
+250° C
Ordering Information
Part No.
Description
AG604-86
AG604-86PCB
InGaP HBT Gain Block
700 – 2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
June 2003
AG604-86
The Communications Edge TM
InGaP HBT Gain Block
Product Information
Typical Device RF Performance
Supply Bias = 6 V, Rbias = 11.2 Ω, Icc = 75 mA
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
MHz
dB
dB
dB
dBm
dBm
dB
100
22.5
-21
-31
+19.4
+33.6
3.5
500
21.8
-19
-19
+19.4
+33.4
3.5
900
20.5
-21
-15
+19.4
+33.1
3.5
1900
17.1
-20
-12
+19.2
+33.1
3.7
2140
16.4
-18
-12
+19.2
+32.8
3.7
2400
15.7
-18
-12
+19.2
+32.4
3.8
3500
13.3
-24
-11
+17.3
5800
9.6
-17
-10
1. Test conditions: T = 25º C, Supply Voltage = +6 V, Device Voltage = 5.16 V, Rbias = 11.2 Ω, Icc = 75 mA typical, 50 Ω System.
2. 3OIP measured with two tones at an output power of +2 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by external components shown in the application circuit.
Gain vs. Frequency
Return Loss
I-V Curve
0
Device Current (mA)
120
S11, S22 (dB)
22
18
16
-20
-30
14
-40 C
+25 C
S11
+85 C
1
2
Frequency (GHz)
3
0
4
1
3
4
5
45
30
1.5
2
2.5
2
+25 C
+85 C
-40 C
200
400
600
800
0
1000
Gain (dB)
10
+85 C
0.5
Gain
24
18
20
16
18
16
16
12
14
1
1.5
2
2.5
3
Output Power / Gain vs. Input Power
frequency = 900 MHz
5
+85 C
+25 C
Frequency (GHz)
Output Power / Gain vs. Input Power
P1dB vs. Frequency
20
5.8
3
Frequency (MHz)
15
5.4
0
0
22
5.0
1
-40 C
3
4.6
Noise Figure vs. Frequency
40
20
+25 C
4.2
4
Frequency (GHz)
-40 C
3.8
Device Voltage (V)
30
1
20
5
+85 C
20
0.5
40
0
3.4
35
0
60
6
NF (dB)
35
25
P1dB (dBm)
2
Optimal operating point
Output IP2 vs. Frequency
50
OIP2 (dBm)
OIP3 (dBm)
Output IP3 vs. Frequency
+25 C
80
Frequency (GHz)
40
-40 C
100
-40
12
0
S22
8
Output Power
Output Power (dBm)
Gain (dB)
Gain (dB)
20
-10
frequency = 2000 MHz
24
20
Gain
14
16
12
12
10
8
Output Power (dBm)
24
Output Power
0
12
0
0.5
1
1.5
2
2.5
Frequency (GHz)
3
3.5
4
4
-12
-8
-4
0
Input Power (dBm)
4
8
8
4
-12
-8
-4
0
Input Power (dBm)
4
8
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
June 2003
AG604-86
The Communications Edge TM
InGaP HBT Gain Block
Product Information
Typical Device RF Performance (cont’d)
Supply Bias = +8 V, Rbias = 38 Ω, Icc = 75 mA
Gain vs. Frequency
Output IP3 vs. Frequency
24
Output IP2 vs. Frequency
40
50
35
45
Gain (dB)
20
18
16
OIP2 (dBm)
OIP3 (dBm)
22
30
25
35
14
-40 C
-40 C
+25 C
+85 C
0
1
2
Frequency (GHz)
+25 C
+85 C
3
+25 C
+85 C
30
0
4
0.5
1
1.5
2
2.5
3
0
200
Frequency (GHz)
400
600
800
1000
Frequency (MHz)
P1dB vs. Frequency
Noise Figure vs. Frequency
5
20
4
15
NF (dB)
P1dB (dBm)
-40 C
20
12
40
10
5
-40 C
+25 C
3
2
1
+85 C
-40 C
0
+25 C
+85 C
0
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
Vcc
Icc = 75 mA
1.5
2
2.5
3
Frequency (GHz)
Frequency (GHz)
Application Circuit
R1
Bias
Resistor
C4
Bypass
Capacitor
C3
0.018 µF
L1
RF Choke
RF IN
RF OUT
AG604-86
C2
Blocking
Capacitor
C1
Blocking
Capacitor
Recommended Component Values
Reference
Designator
50
500
L1
820 nH
220 nH
C1, C2, C4
.018 µF
1000 pF
Frequency (MHz)
900
1900
2200
68 nH
27 nH
22 nH
100 pF
68 pF
68 pF
2500
18 nH
56 pF
1. The proper values for the components are dependent upon the intended frequency of operation.
2. The following values are contained on the evaluation board to achieve optimal broadband performance:
Ref. Desig.
L1
C1, C2
C3
C4
R1
Value / Type
39 nH wirewound inductor
56 pF chip capacitor
0.018 µF chip capacitor
Do Not Place
10.0 Ω 1% tolerance
Size
0603
0603
0603
0805
3500
15 nH
39 pF
Recommended Bias Resistor Values
S upply
R1 value
S ize
Voltage
6V
11.2 ohms
0805
7V
24.5 ohms
1210
8V
38 ohms
1210
9V
51 ohms
2010
10 V
65 ohms
2010
12 V
91 ohms
2512
The proper value for R1 is dependent upon the supply
voltage and allows for bias stability over temperature.
WJ recommends a minimum supply bias of +6 V. A
1% tolerance resistor is recommended.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
June 2003
AG604-86
The Communications Edge TM
InGaP HBT Gain Block
Outline Drawing
Product Information
Product Marking
The component will be marked with a “K”
designator followed by a two-digit numeric
lot code on the top surface of the package.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
ESD Rating:
Value:
Test:
Standard:
Class 0
Passes at 150 V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
ESD Rating:
Value:
Test:
Standard:
Class II
Passes at 250 V
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
MSL Rating: Level 1
Standard:
JEDEC Standard J-STD-020A
Land Pattern
Mounting Config. Notes
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
June 2003
AG604-86
The Communications Edge TM
InGaP HBT Gain Block
Product Information
Typical Device Data
S-Parameters (Vdevice = +5.16 V, ICC = 75 mA, T = 25°C, calibrated to device leads)
Freq (MHz)
50
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
5000
5200
5400
5600
5800
6000
S11 (dB)
-21.36
-21.23
-18.74
-19.71
-20.47
-21.14
-22.35
-23.14
-23.16
-22.34
-21.07
-18.27
-18.15
-18.60
-19.18
-19.91
-21.10
-22.93
-25.81
-26.19
-23.27
-21.13
-19.16
-17.62
-17.41
-17.39
-17.69
-18.45
-18.57
-17.559
-16.835
S11 (ang)
S21 (dB)
S21 (ang)
171.20
154.51
139.75
121.47
102.96
85.39
64.08
39.74
20.02
-3.53
-15.63
-14.76
-23.18
-29.21
-31.42
-33.93
-34.77
-23.79
-7.08
33.03
63.55
82.96
91.81
97.58
105.84
114.74
123.53
141.89
160.94
-179.75
-168.81
23.29
23.08
22.70
22.22
21.59
20.90
20.21
19.51
18.85
18.16
17.53
16.98
16.40
16.03
15.52
15.09
14.63
14.19
13.77
13.30
12.87
12.46
12.05
11.69
11.36
11.10
10.87
10.65
10.51
10.305
10.119
176.64
165.87
152.25
139.81
128.44
117.72
108.26
99.29
91.38
83.58
76.36
70.43
63.80
59.33
52.69
46.60
40.44
34.18
28.51
22.50
16.37
10.66
5.00
-0.46
-5.57
-10.67
-15.44
-20.17
-24.72
-29.704
-34.752
S12 (dB)
-25.29
-25.34
-25.46
-25.28
-25.06
-24.89
-24.54
-24.12
-23.73
-23.54
-23.21
-23.23
-22.42
-22.28
-21.83
-21.52
-21.13
-20.84
-20.61
-19.99
-19.89
-19.74
-19.51
-19.12
-18.86
-18.60
-18.20
-17.82
-17.60
-17.252
-16.898
S12 (ang)
0.98
1.21
2.11
2.15
3.27
6.01
4.79
8.76
7.67
8.78
8.09
7.25
7.38
5.51
5.06
1.63
1.32
-2.12
-4.31
-4.48
-8.20
-10.65
-13.25
-15.57
-19.05
-21.88
-23.87
-26.10
-29.15
-31.774
-32.65
S22 (dB)
-36.23
-27.42
-20.70
-17.98
-16.18
-15.00
-14.09
-13.62
-13.22
-12.92
-12.63
-12.45
-12.44
-12.39
-12.38
-12.16
-11.78
-11.15
-10.45
-9.49
-8.73
-8.15
-7.62
-7.28
-7.25
-7.36
-7.78
-8.47
-9.11
-10.152
-10.883
S22 (ang)
-30.61
-87.64
-131.03
-130.51
-139.87
-145.66
-152.33
-157.32
-161.59
-166.87
-171.09
-160.51
-169.50
-175.01
175.81
163.69
152.82
141.58
131.00
122.57
114.71
107.83
103.07
98.42
96.03
93.88
92.50
92.30
92.86
92.854
93.053
Device S-parameters are available for download off of the website at: http://www.wj.com
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
June 2003
Similar pages