Analogic AHK1117XPY-33-B1 1 amp linear regulator Datasheet

ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
PowerLinear
TM
Features
General Description
The AHK1117 is a Positive Linear Regulator
designed to deliver 1 amp. It features adjustable
or fixed output voltages and excellent
performance over line and load variations. The
device is able to protect itself and the load from
short circuit conditions with integrated current
limiting circuitry. Thermal shutdown is activated
to prevent damage under extreme conditions.
•
•
•
•
Guaranteed 1.2V max Dropout at max current
Adjustable or Factory programmed output
voltages
Excellent performance over line, load
Current limit protection
Over-Temperature protection
SOT-223, TO-252 (DPAK) and TO-220
packages
Applications
•
•
•
•
•
Active SCSI Terminators
High Efficiency Linear Regulators
Post Regulators for Switching Supplies
Battery Chargers
5V to 3.3V Linear Regulators
Typical Application
INPUT
OUTPUT
IN
AHK1117
OUT
GND/ADJ
10uF
10uF
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-1
1117.2000.05.0.92
Preliminary Information
The AHK1117 is available in surface mount SOT223 or TO-252 (DPAK), and through-hole TO-220
packages.
•
•
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Symbol
VIN
IOUT
TJ
ΘJA
ΘJA
ΘJA
PD
PD
PD
TLEAD
Description
Input Voltage
DC Output Current
Operating Junction Temperature Range
Thermal Resistance (SOT-223)
Thermal Resistance (TO-252)
Thermal Resistance (TO-220)
Maximum Power Dissipation (SOT-223)
Maximum Power Dissipation (TO-252)
Maximum Power Dissipation (SOT-220)
Maximum Soldering Temperature (at leads, 10 sec)
Max
Units
15
PD/(VIN-VO)
0 to 125
150
80
60
V
mA
°C
°C/W
°C/W
°C/W
mW
mW
mW
°C
Internally
Limited
300
Note: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at
conditions other than the operating conditions specified is not implied. Only one Absolute Maximum rating should be applied at any one
time.
Recommended Operating Conditions
Symbol
VIN
T
Description
Input Voltage
Ambient Temperature Range
Rating
Units
VOUT+1.2 to 13.2
V
°C
-40 to +85
Electrical Characteristics AHK1117-ADJ(TJ=25°C unless otherwise noted)
Symbol
VREF
Description
Reference Voltage
∆VOUT/
VOUT
Line Regulation
∆VOUT/
VOUT
Load Regulation
VDO
Dropout Voltage
ILIM
TC
∆V/∆T
IADJ
∆IADJ
IOUTMIN
VN
PSRR
1
Current Limit
Ouput Voltage Temp. Coeff.
Temperature Stability
Adjust Pin Current
Adjust Pin Current Change
Minimum Load Current
RMS Output Noise
Ripple Rejection Ratio
Conditions
VIN = 5V, IOUT = 10mA
TJ=25°C
Full temp
VIN = 4.75 - 7V,
TJ=25°C
IOUT = 10mA
TJ=25°C
VIN = 4.75 - 15V,
IOUT = 10mA
Full temp
TJ=25°C
VIN = 5V,
IOUT = 10mA -1A
Full temp
IOUT = 10mA -1A,
Full temp
∆VOUT = ±1%
VIN = 2.75 - 7V
Full temp
VIN = 2.75 - 7V, IOUT = 10mA - 1A
VIN = 5V, IOUT = 100mA, Full temp
TJ=25°C
VIN = 2.75 - 7V,
IOUT = 10mA - 1A
Full temp
VIN = 2.75 - 7V, IOUT = 10mA - 1A,
Full temp
VIN = 5V
TJ = 25°C
VIN = 5V, IOUT = 1A, Full temp
Min
Typ
Max
Units
1.238
1.225
1.250
1.250
1.262
1.275
V
0.2
0.05
0.2
0.3
0.4
0.3
0.4
1.0
1.2
1.0
%
V
A
%/°C
%
0.005
0.5
55
90
60
%
µA
0.2
5
µA
5
0.003
72
10
mA
%VOUT
dB
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-2
1117.2000.05.0.92
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Electrical Characteristics AHK1117-3.3 (fixed)(TJ=25°C unless otherwise noted)
Symbol
VOUT
Description
Output Voltage
VIN = 5V, IOUT = 0A
∆VOUT/
VOUT
Line Regulation
∆VOUT/
VOUT
Load Regulation
VDO
Dropout Voltage
ILIM
IQ
TC
∆V/∆T
VN
PSRR
Conditions
1
Current Limit
Quiescent Current
Ouput Voltage Temp. Coeff.
Temperature Stability
RMS Output Noise
Ripple Rejection Ratio
TJ=25°C
Full temp
VIN = 4.75 - 7V,
TJ=25°C
IOUT = 0A
TJ=25°C
VIN = 4.75 - 15V,
IOUT = 0A
Full temp
TJ=25°C
VIN = 5V,
IOUT = 0A -1A
Full temp
IOUT = 0A -1A, ∆VOUT = ±1%,
Full temp
VIN = 4.75 - 7V, Full temp
VIN = 5V, IOUT = 0-1A, Full temp
VIN = 4.75 - 7V, IOUT = 0 - 1A
VIN = 5V, IOUT = 100mA, Full temp
TJ = 25°C
VIN = 5V, IOUT = 1A, Full temp
Min
Typ
Max
Units
3.270
3.234
3.30
3.30
3.330
3.336
V
0.2
0.05
0.2
0.3
0.4
0.3
0.4
1.0
1.2
1.0
60
6
0.005
0.5
0.003
72
13
%
%
V
A
mA
%/°C
%
%VOUT
dB
Note 1: VDO is defined as VIN - VOUT when VOUT is 98% of nominal.
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-3
1117.2000.05.0.92
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Pin Descriptions
Pin #
Symbol
Function
1
GND/ADJ
2
3
OUT
IN
For the fixed version of AHK1117, pin 1 is the ground connection. For the adjustable
version, this pin is the ADJ pin. See detailed description for further information
regarding configurations.
Output pin – should be decoupled with 10µF tantalum or greater output capacitor.
Input pin - should be decoupled with 10µF tantalum or greater capacitor.
Functional Block Diagram
VIN
VOUT
Over-Current
Protection
Over-Temp
Protection
VREF
GND/ADJ
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-4
1117.2000.05.0.92
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Ordering Information
Output Voltage
Package
3.3V
3.3V
SOT-223
TO-252
(DPAK)
TO-220
Adjustable
SOT-223
3.3V
Adjustable
Adjustable
TO-252
(DPAK)
TO-220
Part Number
Marking
Bulk
Tape and Reel
AHK1117XMY-3.3-B1
AHK1117XMY-3.3-T1
N/A
AHK1117XNY-3.3-T1
AHK1117XPY-3.3-B1
AHK1117XMY-ADJB1
N/A
AHK1117XMY-ADJ-T1
N/A
AHK1117XNY-ADJ-T1
AHK1117XPY-ADJ-B1
N/A
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-5
1117.2000.05.0.92
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Pin Configuration
SOT-223
(Top View)
TO-252
(Top View)
VIN
V IN
VOUT
V OUT (connected with heat sink)
GND/ADJ
GND
TO-220
(Top View)
VIN
VOUT
ADJ/GND
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-6
1117.2000.05.0.92
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Package Information
TO 220
E
A
A
b
C1
D
E
e
e1
e3
F
H1
K
CP
Q
L
a
b1
R
F
Q
CP
a
H1
(5X)
D
E - PIN
b1
L
R
e3
b
C1
H
e
e1
Millimeters
Min
Max
4.06
4.83
0.63
1.02
0.38
0.56
14.22 14.99
9.78
10.54
2.29
2.79
4.83
5.33
1.14
1.40
1.14
1.40
5.94
6.55
2.29
2.92
3.71
3.96
2.62
2.87
13.16 13.79
3°
7°
1.14
1.52
6.17 REF
Inches
Min
Max
0.160
0.190
0.025
0.040
0.015
0.022
0.560
0.590
0.385
0.415
0.090
0.110
0.190
0.210
0.045
0.055
0.045
0.055
0.234
0.258
0.090
0.115
0.146
0.156
0.103
0.113
0.518
0.543
3°
7°
0.045
0.060
0.243 REF
Note:
1. Dimension C1 apply for TIN plate finish.
2. For solder DIP lead finish dimension, C1
should be 0.015”~0.027” (0.38mm~0.69mm)
SOT 223
Dim
A
A1
B
B1
C
D
e
e1
E
H
S
t
θ
θ1
θ2
D
B
H
E
S
e
A
01
B1
e1
Inches
Min
Max
0.060
0.067
0.001
0.004
0.116
0.124
0.026
0.033
0.100
0.014
0.248
0.264
0.0905 TYP
0.181 TYP
0.130
0.146
0.264
0.287
0.033
0.041
0.043
0.051
10° MAX
10°
16°
10°
16°
Note:
t
A1
Millimeters
Min
Max
1.50
4.83
0.02
1.02
2.95
0.56
0.65
14.99
0.25
10.54
6.30
2.79
2.30 TYP
4.60 TYP
3.30
1.40
6.70
6.55
0.85
2.92
1.10
3.96
10° MAX
10
16°
10
16°
02
0
c
1.
2.
Package outline exclusive of any mold flashes
dimension.
Package outline exclusive of burr dimension.
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-7
1117.2000.05.0.92
ANALOGIC
TM
AHK1117
TECH
1 Amp Linear Regulator
Dim
TO - 252 ( D PA K )
E
K
B
A
L
F
A
B
C
D
E
F
G
H
I
J
K
L
Millimeters
Min
Max
0.45
0.55
1.65
1.95
0.90
1.50
0.45
0.60
6.40
6.80
5.40
5.80
2.20
2.85
0.00
*2.30
0.00
0.90
0.00
0.80
5.20
5.50
1.20
1.60
Inches
Min
Max
0.0177
0.0217
0.0650
0.0768
0.0354
0.0591
0.0177
0.0236
0.2520
0.2677
0.2126
0.2283
0.0866
0.1122
0.0000
*0.0906
0.0000
0.0354
0.0000
0.0315
0.2047
0.2165
0.0472
0.0630
Note:
G
M
J
C
H
D
1.
2.
Controlling dimension: Millimeters.
Maximum lead thickness includes lead finish
thickness; minimum lead thickness is the
minimum thickness of base material.
Advanced Analogic Technologies, Inc.
1250 Oakmead Pkwy, Suite 310, Sunnyvale, CA 94086
(408)524-9684 Fax (408)524-9689
2-8
1117.2000.05.0.92
Similar pages