Series AM15TW-Z 15 Watt | DC-DC Converter FEATURES: • • • • • Ultra Wide Input Range 4:1 1600 VDC Isolation Efficiency up to 90% Soft Start Remote On/Off Function • • • • • No Minimum Load Required -40ºC to +85ºC Operating Temperature Range Short Circuit & Over Voltage Protection DIP 24 Package Low No Load Input Current Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Maximum Capacitive load (µF) Efficiency (%) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5.1 12 15 3.3 5.1 12 15 4000 3000 1250 1000 4000 3000 1250 1000 1600 1600 1600 1600 1600 1600 1600 1600 4700 3300 600 400 4700 3300 600 400 87 89 90 90 86 88 90 89 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Maximum Capacitive load (µF) Efficiency (%) 9-36 9-36 9-36 18-75 18-75 18-75 ±5 ±12 ±15 ±5 ±12 ±15 ±1500 ±625 ±500 ±1500 ±625 ±500 1600 1600 1600 1600 1600 1600 ±1500 ±288 ±200 ±1500 ±288 ±200 86 89 90 86 89 90 AM15TW-2403SZ AM15TW-24051SZ AM15TW-2412SZ AM15TW-2415SZ AM15TW-4803SZ AM15TW-48051SZ AM15TW-4812SZ AM15TW-4815SZ Models Dual output Model AM15TW-2405DZ AM15TW-2412DZ AM15TW-2415DZ AM15TW-4805DZ AM15TW-4812DZ AM15TW-4815DZ NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Input Specifications Parameters Voltage range Filter Turn on Transient process time Transient response deviation Start up time Absolute Maximum Rating Peak Input Voltage time Input reflected ripple current Quiescent Current On/Off Control www.aimtec.com F 051e R12.C Nominal Typical 24 48 Maximum 9-36 18-75 π (Pi) Network VDC 250 ±3 Nominal Vin and constant resistive load 24 Vin models 48 Vin models µs % ms 20 -0.7-50 -0.7-100 VDC 1000 20 15 ON – High (3.0 ... 12Vdc) or open circuit; OFF – Low (0 ... 1.2Vdc) or Short circuit pin1 and pin 2/3 OFF idle current: 5.0 mA typ Tel: +1 514 620 2722 1 of 3 Units ms mA p-p mA Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15TW-Z 15 Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage Tested Case/Input and Output Resistance Capacitance Conditions Typical Rated Units 1600 VDC VDC MOhm pF Maximum Units 3 sec 1600 >1000 2000 Output Specifications Parameters Voltage accuracy Voltage balance Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Over voltage protection Over current protection Short Circuit protection Short circuit restart Ripple & Noise Conditions Typical ±1 ±5 ±0.2 ±0.5 ±1.0 Zener diode clamp 150 Continuous Auto recovery 60 Dual output HL-LL 0% Load to Full Load 0% Load to Full Load Full Load % % % % % % m Vp-p General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load Full Load with derating above 60ºC 330 Maximum -40 to +85 -40 to +125 105 Above 60ºC Units KHz o C o C o C 2.5 % per 1ºC Free air convection 95 % RH Nickel-coated Copper 20.0 g Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.8 x 0.40 inches 31.75 x 20.32 x 10.16 mm o > 410 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) Safety Specifications Parameters Agency Approval Standards www.aimtec.com F 051e R12.C CE EN55022 Class A IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B (requires 2 external cap 330uF/100V or 1 cap 680 uF/100V for parallel connection) IEC61000-4-5, Perf. Criteria B (requires 2 external cap 330uF/100V or 1 cap 680 uF/100V for parallel connection) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Note: also meets IEC 60950-1:2001 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15TW-Z 15 Watt | DC-DC Converter Pin Out Specifications Remote On/Off -V Input -V Input Common -V Output +V Output Common +V Input +V Input Dimensions 31.80 (1.25) 22.90 (0.90) 0.50 (0.02) 1 2 3 11 Bottom View 23 22 2.54 (0.10) Printed Face 9 16 15.20 (0.60) Dual Remote On/Off -V Input -V Input No Pin N.C +V Output -V Output +V Input +V Input 0.50 (0.02) Single 1 2 3 9 11 14 16 22 23 20.30 (0.80) Pin 14 5.08 (0.20) 3.05 (0.12) 10.20 (0.40) All dimensions are typical: millimeters (inches) Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002) Pin Pitch Tolerance: ± 0.35 (±0.014) Case Tolerence: ± 0.5 (±0.02) Derating Free Air Convection 60º C Output Power (%) 100 80 Safe Operating Area 60 40 30 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only